Index: ossp-pkg/petidomo/ChangeLog RCS File: /v/ossp/cvs/ossp-pkg/petidomo/ChangeLog,v rcsdiff -q -kk '-r1.2' '-r1.3' -u '/v/ossp/cvs/ossp-pkg/petidomo/ChangeLog,v' 2>/dev/null --- ChangeLog 2001/01/18 20:07:58 1.2 +++ ChangeLog 2001/02/18 00:05:39 1.3 @@ -1,3 +1,793 @@ +2001-02-17 Peter Simons + + * Updated the documentation for the 4.x version. + + * When posting to a list, Petidomo will now let the "Keywords:" + and "Summary:" headers pass. These headers are uncommon but have + been around for ages. + + * Petidomo will not log to syslog() with level LOG_NOTICE anymore + unless it is an error or at least an unusual condition. Lowered + level of most messages to LOG_INFO or below. + + * Fixed a type in the example master config file: MTAOptions + should have '-i' set, not '-v'. + +2001-01-21 Ralf S. Engelschall + + * Added DESTDIR support to the Makefile. + + * Added "dump" mode to Petidomo, which is used by the + petidomo-kickout script rather than messing in the config files + itself. + +2001-01-20 Ralf S. Engelschall + + * Changed Petidomo so that it will send a separate mail to the + list owner when someone subscribes, rather than just sending a + carbon copy of the mail the user receives. This will prevent + unnecessary confusion. + +2001-01-20 Ralf S. Engelschall + + * Added "dist" and "snap" target to the Makefile. These can be + used to build a distribution or a snapshot respectively. + + * Added make targets for increasing or updating version + information the version information: "update-version" will update + the date but keep version number, "new-version" will let you + interactively specify new version number. To specify the new + version number for "new-version" on the command line, provide + "VERSION=0.8.15". + +2001-01-20 Peter Simons + + * Underscores in file names suck, because you need an extra + key-press to type them compared to the hyphen. For this reason + (and for consistency) I corrected this horrible, horrible mistake + of the past and renamed everything that contained an underscore. + +2001-01-20 Ralf S. Engelschall + + * .cvsignore, Makefile.in, petidomo.pod: + Add first cut for a petidomo(1) manual page. + +2001-01-20 Peter Simons + + * Makefile.in, config-files.c, config.c: + Renamed the followings tags in petidomo.conf + + MTA_Options --> MTAOptions + List_Directory --> ListDirectory + Ack_Queue_Directory --> AckQueueDirectory + + for consistency reasons. While I was at it, I also renamed the source + file from config.c to config-files.c, because the module config.c is + generally associated with GNU autoconf and this has nothing to do with + it. + +2001-01-20 Ralf S. Engelschall + + * main.c: + Be careful, listname can be NULL in global operation mode and not + all printf implementations are as smart as BSD's variant. Instead of + printing "(null)" others just dump core. + + * docs/.cvsignore: + Ignore LaTeX generated files + +2001-01-19 Peter Simons + + * Makefile.in: Cosmetic change. + + * Makefile.in: Updated dependencies. + + * archive.c: + Enhanced portability. This commit also contains an older + change made by Ralf, which I have to re-commit after + screwing up with the "cvs admin" command. Sorry!!! + + * mailer.c: + Minor change to enhance portability. + + * config.c: + The module contains the static variable MasterConfig, which all other + Petidomo routines can access via getMasterConfig(). The routine + getListConfig(), which is defined in config.c, too, used the "correct" + mechanism to access MasterConfig, even though it could access it + directly. Since I chose the same name ("MasterConfig" :->) for the + local copy of the pointer, gcc warns that this variable shadows the + static one. To get rid of this warning, and since it doesn't make one + bit a difference, getListConfig() accessse the static variable + directly now. + + * hermes.c: + Changed ACL semantics: The ACL is processed only if the posting didn't + have a valid password. If it did, the mail is going through in any + case and the ACL is not tested. + + * config/index, Makefile.in: + In case no index file is installed, "make install" will create an + example file at the correct location so that the admininstrator + hopefully figures out that there is some work to be done. + + * acl.y: + - Added a warning message to be logged when no global ACL file exists. + + - Reordered tests in check_local_acl_file: When no listname has been + given, we don't need to initialize the lexer at all. + + * hermes.c: + Petidomo used the mail's envelope to deliver the request for + confirmation. I have changed this to either reply-to or from (if + reply-to is unset), because sendmail will destroy the original + envelope under obscure circumstances. + + * main.c: Removed unnecessary cast. + + * config.c: + Due to a mix-up in the variable names, Petidomo expanded all list + config file paths incorrectly when the list has a flat hierarchy. That + is fixed now. + +2001-01-19 Ralf S. Engelschall + + * Makefile.in: + Provide "make dist" command for rolling distribution tarball. + +2001-01-19 Peter Simons + + * main.c: + Added version information to the start-up log message. + +2001-01-19 Ralf S. Engelschall + + * Makefile.in, main.c, version.c: + First step in GNu shtool version support: + Add version.c and use it for "petidomo --version". + Support for handling version.c in Makefile.in is coming later. + + * libconfigfile/config.c, librfc822/address.y, librfc822/decomment.c, libargv/argv.c, acl.y, address-db.c, approve.c, config.c, filter.c, hermes.c, index.c, io.c, mailer.c, members.c, password.c, queue_command.c, queue_posting.c, subscribe.c, unsubscribe.c: + Get rid of all complaints from GCC 2.97 + (except for two things which I do not want to change on my own) + +2001-01-19 Peter Simons + + * queue_command.c, queue_posting.c: + Incorporated the cookie into the end-of-mail-marker used in the + ack-script, so that the whole mechanism doesn't break when somebody + has the words '[end-of-mail-marker]' in the mail body itself. + + * subscribe.c, unsubscribe.c: + Fixed the spelling of the newly added syslog messages. + + * main.c: + Moved the initial startup log message up so that it is logged before + the main config file is parsed. Also added the path of the main config + file to the message so that people can see where Petidomo locks for it + in case parsing fails. + + * hermes.c, subscribe.c, unsubscribe.c: + Greatly enhanced the log messages Petidomo writes. Made the existing + messages more helpful, added lots of new ones, generally made things + real perfect. Remember: Life is BEAUTIFUL. + +2001-01-19 Ralf S. Engelschall + + * Makefile.in: + Do not show subdir walking commands + +2001-01-19 Peter Simons + + * main.c: + Added a message that is logged every time Petidomo starts up. This + message will "dump" the configuration of Petidomo so that the user has + a clue which Petidomo instance is doing what. + + * subscribe.c, unsubscribe.c: + When a un-/subscribe command needs confirmation, the request for + confirmation is sent to the address that is supposed to added to or + removed from the list. If, and only if, this address is different than + the one from which the request came, a short mail is sent to the + requestor to inform him what is going on. + + * tool.c, config.c: + Mailing list config files may now have the suffix ".config" or + ".conf". Similarly, if the list config file is in a separate + directory, it may be called /config or /conf. + + * main.c: + Added code that will set the real user id of the process equal to the + effective user id. + + * Makefile.in: + - Word-wrapped long lines to fit into 80 characters per line. + - Updated dependencies. + - Removed BINDIR from FLAGS_TO_PASS as it isn't needed anymore. + + * main.c, petidomo.h, queue_command.c, queue_posting.c: + Petidomo needs to know the path to the executable in order to write + the ack-spool file, which starts Petidomo again to process the + acknowledged command or posting. I used BINDIR for that, but realized + that this sucks when somebody manually moves the binary. Hence, I am + using the contents of argv[0] now, normalized to an absolute path. + This value is stored in the global variable who_am_i, which the + queue_*() routines now use. + +2001-01-19 Ralf S. Engelschall + + * generate_cookie.c: + Get rid of the following GCC complains: + generate_cookie.c: In function `generate_cookie': + generate_cookie.c:58: warning: implicit declaration of function `strlen' + generate_cookie.c: In function `MD5Update': + generate_cookie.c:245: warning: declaration of `index' shadows global declaration + generate_cookie.c:260: warning: implicit declaration of function `memcpy' + generate_cookie.c: In function `MD5Final': + generate_cookie.c:286: warning: declaration of `index' shadows global declaration + generate_cookie.c:303: warning: implicit declaration of function `memset' + + * archive.c: + As GCC complained: There is an ISO 9899:1990 (``ISO C'') function + clock(3), so we have a symbol conflict here. Get rid of this by renaming + our symbol. + + * libtext/text.h: + Do not use C++ comments in ANSI C + +2001-01-18 Ralf S. Engelschall + + * README, acl.y, acl_scan.l, address-db.c, approve.c, archive.c, authen.c, config.c, filter.c, generate_cookie.c, handleacl.c, help.c, hermes.c, index.c, io.c, listserv.c, mailer.c, main.c, members.c, parsearray.c, password.c, petidomo.h, queue_command.c, queue_posting.c, rfcparse.c, subscribe.c, tool.c, unsubscribe.c: + As we agreed today, Petidomo is now open because licensed under GPL and + always will be licensed under GPL, so use "Petidomo" as the program name + everywhere and consistently. + + * Makefile.in: + Install petidomo-xxxx tools + + * Makefile.in: Show were we are operating + + * ChangeLog: Start filling ChangeLog... + + * README: *** empty log message *** + +2001-01-18 Peter Simons + + * petidomo-approve, petidomo-kickout: + Add old RSE admin scripts + +2001-01-18 Ralf S. Engelschall + + * config.c: ListACLFile -> ACLFile + + * Makefile.in: New layout + + * configure.in, Makefile.in: + Switch to GNU shtool + + * etc/install-sh: + Remove obsolete install-sh + + * etc/shtool: Add GNU shtool + + * Makefile.in: + fix install-testlist target + +2001-01-16 Peter Simons + + * subscribe.c, unsubscribe.c: + When a request for confirmation is required, the originator of the + command will receive a short mail, telling him that this is so, so + that he knows what's going on. + + * subscribe.c, unsubscribe.c: + Delayed the processing of the acknowledgment-requirement so that you + don't have to ack commands that will fail anyways. + + * Makefile.in, address-db.c, hermes.c, petidomo.h: + Implemented the acked-once feature. + + * acl.y, acl_scan.l, handleacl.c, petidomo.h: + Added new action keyword to the Access Control Language: approve. This + keyword will -- unlike to "pass" -- not only pass the mail, but will + also make sure that the mail passes all other authorization controls. + This means, the mail will be treated as if the Petidomo master + password had been given in the header. + + * approve.c: + Added include of sys/types.h. Required on some systems to be able to + include regex.h. + + * hermes.c: + Moved the call to checkACL() before anything else is tested regarding + authorization. Combined with the new "approve" action in the ACL file, + this allows to pass all other authentication mechanisms with the ACL. + +2001-01-15 Peter Simons + + * hermes.c: + Added code that will request confirmation when posting to a list that + is set to "acknowledged". + + * Makefile.in, approve.c, main.c, petidomo.h: + Implemented the approve mode, where incoming mails are searched for + confirmation cookies and the apropriate queue entries will be + executed. + + * subscribe.c: + The call to queue_command() had the command wrong. + + * subscribe.c, unsubscribe.c: + Added code that will send the "request for confirmation" mail out when + apropriate. + + * hermes.c: + Cosmetic change: Reformatted the source. + + * config.c, config/list-config: + - ListType is no longer a required parameter; it now defaults to "open". + + * hermes.c, listserv.c, main.c, petidomo.h: + Had to make is_approved a global variable, because it is actually + tested in subroutines of listserv_main() and hermes_main(), like + subscribe(), which's parameter list I don't want to change. + + * petidomo.h, queue_command.c, queue_posting.c: + queue_command() and queue_posting() will now return the cookie used as + filename, so that the calling code can mail back the request for + confirmation. + + * config.c, config/list-config, petidomo.h, subscribe.c, unsubscribe.c: + List's "AllowPublicSubscripiton" does not exist anymore. Now we have + "SubscriptionType" with valid values "public", "admin" or + "acknowledged". + + * config/petidomo.conf: + - Added Ack_Queue_Dir keyword. + + - Changed default of List_Directory from LOCALSTATEDIR to + LOCALSTATEDIR/lists. + + * config/list-config, unsubscribe.c, config.c, petidomo.h, subscribe.c: + Removed the whole concept of "alien subscription". It was stupid to + begin with and now that we'll have acknowledged subscriptions, it is + useless, too. + + * Makefile.in, config.c, petidomo.h, queue_command.c, queue_posting.c: + Implemented spooling mechanism for requests and postings that need an + acknowledgement to be processed. The code is there, it just isn't + called yet. + + * hermes.c, listserv.c, main.c: + Added --approved command line parameter, which is treated as a + boolean. Whether it is set or not will be passed through to + listserv_main() and to hermes_main(). The parameter will be used by + the spooling mechanism. + +2001-01-11 Peter Simons + + * config.c, config/list-config, petidomo.h: + Added config entry "AcknowledgementFile" to the mailing list's config file. + + * Makefile.in, configure.in, generate_cookie.c, petidomo.h: + Added generate_cookie() routine taken from mapSoN. + + * unsubscribe.c: + The requestor will now receive a mail telling him something went wrong + when he tries to unsubscribe an address without specifying a list + name. + +2001-01-10 Peter Simons + + * help.c, members.c, subscribe.c, unsubscribe.c: + Set the right margin for word-wrapping to 70 characters instead of 75. + + * subscribe.c: + The requestor will now receive a mail telling him something went wrong + when he tries to subscribe an address without specifying a list name. + + * acl.y: + When running in listserv mode, there is no 'listname' which can be + used to get the mailing list's configuration. Thus, the routine + shouldn't try to got one. Fixed it. + + * config.c: Removed debugging output. + +2001-01-08 Peter Simons + + * acl.y: + Changed the ACL code to use the configured locations of the list's ACL + file rather than the hard-coded one. + + * Makefile.in: + Completed the install-testlist target. + + * acl.y, archive.c, config.c, help.c, hermes.c, index.c, mailer.c, main.c, members.c, petidomo.h, subscribe.c, tool.c, unsubscribe.c: + Rewrote Petidomo so that virtually any file's path can be configured + at run-time now. + + * config/petidomo.conf: + Added example entries for the new keywords "List_Directory", + "Help_File", "ACL_File", and "Index_File". + + * config/list-config: + Added example entries for the new keywords "IntroductionFile", + "DescriptionFile", "ACLFile", "HeaderFile", "SignatureFile", and + "AddressFile". + + * config/petidomo.acl: + Removed the path of the file in the comment header, since it doesn't + fit anymore anyway. + + * Makefile.in: Added dependencies. + + * config.c, main.c, petidomo.h: + Petidomo will now expect its master config file at + SYSCONFDIR/petidomo.conf. This location can be changed at run-time + with the command line parameter --masterconf. + + * Makefile.in: + Added preliminary install and install-testlist target. + + * configure.in: + Removed the ETCDIR stuff again. We use sysconfdir instead. + +2001-01-06 Peter Simons + + * Makefile.in, config.c, configure.in, petidomo.h: + Replaced the old basedir-mechanism in Petidomo, which used to be the + home directory of the petidomo user. Now, Petidomo expects its master + config file in ETCDIR, which is '/etc' per default. All other paths + will be set there at run-time. + + * handleacl.c, help.c, hermes.c, index.c, members.c, subscribe.c, unsubscribe.c: + - Added a "Petidomo:" prefix to all subject lines, to distinguish them + from regular mail. Rejection mails furthermore have the prefix + "BOUNCE :", mails that need approval have the prefix + "APROVE :". + + - When a mail is rejected due to ACL, the mail body will tell you + whether the global acl file or the list's local acl file hit. + + - If a file "lists//header" exists, it contents will be + added to the headers of the article posted to the list. Be careful + not to have blank lines in there, as this will screw the whole + message up. + + - When generating the index of available mailing lists, the list type + will now be typeset in brackets, e.g.: "(public mailing list)". + + - The index will no longer contain tabs in the mail body. + + * handleacl.c: + The local List_Config variable was potentially used uninitialized. + Fixed that. + +2000-12-16 Peter Simons + + * librfc822/Makefile: + Added dependency to stop parallel make from messing up with the + yacc/lex targets. + + * librfc822/decomment.c: + Fixed parsing bug. + + * librfc822/address.y: + Added definition of YYSTYPE. + + * configure.in: + Use petidomo.h file to determine $srcdir, rather than main.c. + + * Makefile.in, main.c, petidomo.h: + Reversed all changes concerning C++ in Petidomo ... it isn't worth the + major rewrite. + + * librfc822/.cvsignore: + Ignore yacc and lex files + + * librfc822/Makefile, librfc822/address.c, librfc822/address.y, librfc822/address_scan.c, librfc822/address_scan.h, librfc822/address_scan.l, librfc822/address_sep.c, librfc822/decomment.c, librfc822/parse_address.c, librfc822/rfc822.h, librfc822/test.c, libmpools/Makefile, libmpools/mpools.c, libmpools/mpools.h: + - Added GNU GPL copyright headers. + - Cleaned build process up. + + * libmpools/Makefile, libmpools/mpools.c, libmpools/mpools.h: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * libmpools/Makefile, libmpools/mpools.c, libmpools/mpools.h: + New file. + + * librfc822/address_scan.c: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * librfc822/address_scan.c: New file. + + * librfc822/address.c: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * librfc822/address.c: New file. + + * librfc822/decomment.c, librfc822/parse_address.c, librfc822/rfc822.h, librfc822/test.c, librfc822/testaddresslines: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * librfc822/decomment.c, librfc822/parse_address.c, librfc822/rfc822.h, librfc822/test.c, librfc822/testaddresslines: + New file. + + * librfc822/Makefile, librfc822/address.y, librfc822/address_scan.h, librfc822/address_scan.l, librfc822/address_sep.c: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * librfc822/Makefile, librfc822/address.y, librfc822/address_scan.h, librfc822/address_scan.l, librfc822/address_sep.c: + New file. + + * Makefile.in: + Added preliminary install target. + + * config/petidomo.conf: + Removed reference to firepower altogether; MTA is a required keyword. + +2000-12-15 Peter Simons + + * config/petidomo.conf: + Removed note about Firepore MTA. + + * config.c: + Hardcoded the base directory /usr/local/petidomo for the moment. + + * libtext/text.h: + Wrapped the header's contents in "extern C" linkage when compiling in + a C++ module. + + * Makefile.in: + The petidomo binary will now be linked with $(CXX). + Updated dependencies. + + * Makefile.in, config.c, help.c, index.c, members.c, signature.c, subscribe.c, unsubscribe.c: + Removed the signature code and all code that depended on it. In the + new Petidomo, the signature mechanism for server mails will work + differently. + + * config.c, config/petidomo.conf, signature.c: + Removed the global configuration options "DetachImmediately" and + "ShowStatistics". Consequently removed all code that deals with these + options, too. + + * libargv/Makefile: + The clean target will now erase the argv.info file. + + * libargv/.cvsignore: + Ignore the argv.info file. + + * Makefile.in, exit.c: + Removed the mail rescue mechanism and all relating code. I guess + _nobody_ ever used that mechanism anyway, not even me. :-) + + * Makefile.in, acl.y, archive.c, argvSetDebugLevel.c, authen.c, config.c, debug.h, exit.c, filter.c, handleacl.c, help.c, hermes.c, index.c, listserv.c, mailer.c, members.c, password.c, rfcparse.c, subscribe.c, tool.c, unsubscribe.c: + - Removed all debugging code. Now that Petidomo will be "rewritten" + in C++, I need a new paradigm for debugging anyway and the old + solution of mine was to messy for my taste anyway. + + - Petidomo no longer cares under what name it has been started. The + different modes of operation will now be distinguished by a + mandatory command line parameter. + + * Makefile.in: + Added support for C++ source modules within Petidomo. + +2000-12-14 Peter Simons + + * Makefile.in: + Modified the main Makefile so that it will pass the values determined + by Autoconf down to the libraries. + + * Makefile.in: + FreeBSD's make again: That stupid thing really doesn't grasp $< targets. + + * Makefile.in: + FreeBSD's make sucks big time: It doesn't honor the -C flag. Hence we + have to change into the target directory before calling make. + + * Makefile.in: + BSD make doesn't understand $< like GNU make does, thus it is better + to explicitely name the targets for the sake of portability. + + * Makefile.in: + Rewrote the makefile to not require GNU make. + + * libargv/Makefile, libconfigfile/Makefile, liblists/Makefile, libtext/Makefile: + Removed unused suffix .a from the .SUFFIXES target. + + * .cvsignore, configure.in: + - Libraries do not need Autoconf anymore, thus I removed the + AC_CONFIG_SUBDIRS call. + + - Added -O3 to CFLAGS for the sake of good optimization. + + * Makefile.in: Updated dependencies. + + * libargv/.cvsignore, libargv/Makefile, libconfigfile/Makefile, libconfigfile/SMakefile, libconfigfile/configure.in, liblists/Makefile, liblists/SMakefile, liblists/configure.in, liblists/lists.h, liblists/lists.h.in, libtext/Makefile, libtext/SMakefile, libtext/configure.in, libtext/test.txt: + - Removed smake build and autoconf from the libraries. + - Removed unused files. + + * libargv/Makefile, libargv/SMakefile, libargv/configure.in: + Added a real makefile. + + * libargv/argvSetDebugLevel.c: + The file is never used here. + +2000-12-13 Peter Simons + + * libargv/argvSetDebugLevel.c, libargv/test.c, libconfigfile/config.c, libconfigfile/configfile.h, liblists/lists.c, liblists/lists.h.in, libtext/easy_pattern_match.c, libtext/easy_sprintf.c, libtext/find_next_line.c, libtext/find_string.c, libtext/text.h, libtext/transform_text.c, libtext/wordwrap.c: + Added correct GPL copyright headers. + + * libtext/CustomTokenIterator.cpp, libtext/RegexTokenizer.cpp, libtext/RegexTokenizer_test.cpp, libtext/TokenIterator.cpp, libtext/TokenIterator_test.cpp, libtext/text.hpp, libtext/tokenizer_test.cpp: + Removed unused C++ code. + + * Makefile.in: + Cosmetic changes to the Makefile ... nothing important. + + * Makefile.in, configure.in: + After changing librfc822 to get along without libmpools, the library + can (and has been) removed from Petidomo. + + * debug.h: + This header file defines the debug modules Petidomo supports. + + * configure.in: + The source for the configure script generated by Autoconf. + + * petidomo.h: + All internal prototypes and definitions. + + * etc/install-sh: + Autoconf needs this script in order to run sub-configure scripts. + + * liblists/lists.h.in, libtext/CustomTokenIterator.cpp, libtext/RegexTokenizer.cpp, libtext/RegexTokenizer_test.cpp, libtext/TokenIterator.cpp, libtext/TokenIterator_test.cpp, libtext/test.txt, libtext/text.hpp, libtext/tokenizer_test.cpp, liblists/Makefile, liblists/SMakefile, liblists/configure.in, liblists/lists.c, liblists/lists.h, libtext/Makefile, libtext/SMakefile, libtext/configure.in, libtext/easy_pattern_match.c, libtext/easy_sprintf.c, libtext/find_next_line.c, libtext/find_string.c, libtext/text.h, libtext/transform_text.c, libtext/wordwrap.c: + Imported latest version. + + * libconfigfile/Makefile, libconfigfile/SMakefile, libconfigfile/config.c, libconfigfile/configfile.h, libconfigfile/configure.in: + Imported latest version of the library. + + * libargv/NEWS, libargv/SMakefile, libargv/argv.texi, libargv/argv_loc.h, libargv/configure.in, libargv/Makefile, libargv/Makefile.inc, libargv/_argv.h, libargv/argv.c, libargv/argv.h, libargv/argvSetDebugLevel.c, libargv/test.c: + Imported libargv version 2.4.0. + + * acl.y, acl_scan.l, archive.c, argvSetDebugLevel.c, authen.c, config.c, exit.c, filter.c, handleacl.c, help.c, hermes.c, index.c, io.c, listserv.c, mailer.c, main.c, members.c, parsearray.c, password.c, rfcparse.c, signature.c, subscribe.c, tool.c, unsubscribe.c: + - Added correct GNU GPL copyright statements to the files. + - Removed unnecessary include statements. + + * Makefile, Makefile.in: + Rewrote the build process from the scratch. + + * version.h: + The old versioning mechanism needs to be replaced any time soon. + + * archive.h, authen.h, filter.h, mailer.h, rfcparse.h: + The contents of these headers is now included in petidomo.h. + + * signature.c, unregsig.c, unregsig.h: + Renamed unregsig module to signature. Now that Petidomo is released + under GPL, there is no such thing as an "unregistered" version + anymore. + + * acl.c, acl_scan.c, acl_scan.h: + Removed dependent files from CVS repository. + + * etc/mail2news.c: + The program isn't tested, it isn't documented ... so away with it. + + * docs/Makefile, docs/petidomo.tex: + - Removed all use of html.sty. + + - Removed all references to the CGI manager. + + - Removed autoconf support. + + - Removed the index. + + - Reformatted the document to look good and to compile without + warnings. + + * docs/Makefile: + Don't erase the EPS files at 'clean'. + + * docs/directory-struct.eps, docs/ml-principle1.eps, docs/ml-principle2.eps: + Adding EPS files to repository, because those are really hard to + generate correctly. + + * docs/GNUmakefile, docs/Makefile: + Renamed GNUmakefile to Makefile; there's nothing in this makefile + that's specific to GNU make. + + * docs/GNUmakefile: + Added '-f' flag to the 'rm' call in the clean target. + + * docs/GNUmakefile: + Cleaned the Makefile up a lot. Removed explicit targets whereever an + implicit target will do. + + * docs/GNUmakefile, docs/Xstation.bm, docs/directory-struct.fig, docs/ml-principle1.fig, docs/ml-principle2.fig, docs/petidomo.tex, docs/router.bm, docs/world.bm: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * docs/GNUmakefile, docs/Xstation.bm, docs/directory-struct.fig, docs/ml-principle1.fig, docs/ml-principle2.fig, docs/petidomo.tex, docs/router.bm, docs/world.bm: + New file. + + * acl.c, acl_scan.c, acl_scan.h: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * acl.c, acl_scan.c, acl_scan.h: + New file. + + * subscribe.c, tool.c, unregsig.c, unregsig.h, unsubscribe.c, version.h: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * subscribe.c, tool.c, unregsig.c, unregsig.h, unsubscribe.c, version.h: + New file. + + * mailer.c, mailer.h, main.c, members.c, parsearray.c, password.c, rfcparse.c, rfcparse.h: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * mailer.c, mailer.h, main.c, members.c, parsearray.c, password.c, rfcparse.c, rfcparse.h: + New file. + + * filter.c, filter.h, handleacl.c, help.c, hermes.c, index.c, io.c, listserv.c: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * filter.c, filter.h, handleacl.c, help.c, hermes.c, index.c, io.c, listserv.c: + New file. + + * Makefile, acl.y, acl_scan.l, archive.c, archive.h, argvSetDebugLevel.c, authen.c, authen.h, config.c, exit.c: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * Makefile, acl.y, acl_scan.l, archive.c, archive.h, argvSetDebugLevel.c, authen.c, authen.h, config.c, exit.c: + New file. + + * filter/pgp-decrypt.sh, filter/pgp-encrypt.sh: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * filter/pgp-decrypt.sh, filter/pgp-encrypt.sh: + New file. + + * filter/insert-name-in-subject.sh, filter/rfc2369.sh: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * filter/insert-name-in-subject.sh, filter/rfc2369.sh: + New file. + + * libargv/argv.c, libargv/argv.h, libargv/argvSetDebugLevel.c, libargv/test.c: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * libargv/argv.c, libargv/argv.h, libargv/argvSetDebugLevel.c, libargv/test.c: + New file. + + * libargv/Makefile, libargv/Makefile.inc, libargv/_argv.h, libconfigfile/Makefile, libconfigfile/config.c, libconfigfile/configfile.h, libtext/transform_text.c, libtext/wordwrap.c: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * libargv/Makefile, libargv/Makefile.inc, libargv/_argv.h, libconfigfile/Makefile, libconfigfile/config.c, libconfigfile/configfile.h, libtext/transform_text.c, libtext/wordwrap.c: + New file. + + * liblists/Makefile, liblists/lists.c, liblists/lists.h, libtext/Makefile, libtext/easy_pattern_match.c, libtext/easy_sprintf.c, libtext/find_next_line.c, libtext/find_string.c, libtext/text.h: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * liblists/Makefile, liblists/lists.c, liblists/lists.h, libtext/Makefile, libtext/easy_pattern_match.c, libtext/easy_sprintf.c, libtext/find_next_line.c, libtext/find_string.c, libtext/text.h: + New file. + + * config/petidomo.acl, config/petidomo.conf, etc/mail2news.c: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * config/petidomo.acl, config/petidomo.conf, etc/mail2news.c: + New file. + + * README, config/help, config/list-acl, config/list-config: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * README, config/help, config/list-acl, config/list-config: + New file. + + * COPYING, ChangeLog: + Imported Petidomo 2.2 as found on www.petidomo.com. + + * COPYING, ChangeLog: + New file. + + + Petidomo v4 =========== Index: ossp-pkg/petidomo/configure.in RCS File: /v/ossp/cvs/ossp-pkg/petidomo/configure.in,v rcsdiff -q -kk '-r1.9' '-r1.10' -u '/v/ossp/cvs/ossp-pkg/petidomo/configure.in,v' 2>/dev/null --- configure.in 2001/01/20 14:36:43 1.9 +++ configure.in 2001/02/18 00:05:39 1.10 @@ -5,13 +5,18 @@ dnl AC_INIT(petidomo.h) -AC_REVISION($Revision$)dnl +dnl Print the standard OSSP. +dnl AC_DIVERT_PUSH(AC_DIVERSION_NOTICE) V=`./etc/shtool version -lc -dlong version.c` ./etc/shtool echo -e "Configuring %BOSSP Petidomo%b, Version %B${V}%b" AC_DIVERT_POP() +dnl Get rid of the lousy -g and -O defaults in CFLAGS. +dnl +CFLAGS=${CFLAGS:-} + dnl Checks for paths and programs. dnl AC_PROG_CC @@ -41,14 +46,6 @@ CFLAGS="$CFLAGS -Wall -pedantic -pipe" fi -dnl Remove '-g' from the compile flags. -dnl -CFLAGS=`echo $CFLAGS | sed -e "s/-g//"` - -dnl Turn '-O2' to '-O3'. -dnl -CFLAGS=`echo $CFLAGS | sed -e "s/-O2/-O3/"` - dnl Write results. dnl AC_OUTPUT(Makefile)