Index: ossp-pkg/iselect/Makefile.in RCS File: /v/ossp/cvs/ossp-pkg/iselect/Makefile.in,v co -q -kk -p'1.2' '/v/ossp/cvs/ossp-pkg/iselect/Makefile.in,v' | diff -u /dev/null - -L'ossp-pkg/iselect/Makefile.in' 2>/dev/null --- ossp-pkg/iselect/Makefile.in +++ - 2024-05-08 19:01:27.826535158 +0200 @@ -0,0 +1,188 @@ +## +## Makefile -- iSelect Makefile +## +@SET_MAKE@ + +# ------------------------------------------------ +# DEFINITIONS +# ------------------------------------------------ + +# compiler tools +CC = @CC@ +CFLAGS = @CFLAGS@ -I. +LDFLAGS = @LDFLAGS@ +LIBS = @LIBS@ +debug = @debug@ + +# installation tools +SHTOOL = @SHTOOL@ +NEWVERS = $(SHTOOL) version +INSTALL = $(SHTOOL) install +MKDIR = $(SHTOOL) mkdir +FIXPERM = $(SHTOOL) fixperm + +# installation paths +prefix = @prefix@ +exec_prefix = @exec_prefix@ +bindir = @bindir@ +mandir = ${exec_prefix}/man + +# ------------------------------------------------ +# THE DEFAULT TARGETS +# ------------------------------------------------ + +all: config iselect iselect.1 + +# ------------------------------------------------ +# THE CONFIGURATION SUPPORT +# ------------------------------------------------ + +config: configure config_ac.h.in + +configure: configure.in aclocal.m4 acconfig.h + rm -f configure + autoconf configure.in >configure + chmod 770 configure + +config_ac.h.in: configure.in acconfig.h + rm -f config_ac.h.in + autoheader configure.in >config_ac.h.in + +# ------------------------------------------------ +# THE RELEASE STUFF +# ------------------------------------------------ + +_GETDISTINFO = \ + _version=`$(NEWVERS) -lc -dshort iselect_version.c`; \ + _date=`date '+%y%m%d_%H%M'` + +_BUILDDIST = \ + echo "Creating tarball..."; \ + tar cvf - * |\ + tardy --user_number=1000 --user_name=rse \ + --group_number=1000 --group_name=en \ + --prefix=$${_distname} - |\ + gzip >$${_tarball}; \ + echo "Done"; \ + ls -l $${_tarball} + +_NEWVERS = \ + $(NEWVERS) -lc -piSelect $$OPT iselect_version.c; \ + V=`$(NEWVERS) -lc -dlong iselect_version.c`;\ + sed -e "s/Version .*(.*)/Version $$V/g" README.n && mv README.n README; \ + sed -e "s/Version .*(.*)/Version $$V/g" iselect_readme.txt.n && mv iselect_readme.txt.n iselect_readme.txt; + +_UPDATEVERS = \ + V=`$(NEWVERS) -lc -dshort iselect_version.c`;\ + $(NEWVERS) -lc -piSelect -s $$V iselect_version.c; \ + V=`$(NEWVERS) -lc -dlong iselect_version.c`;\ + sed -e "s/Version .*(.*)/Version $$V/g" README.n && mv README.n README; \ + sed -e "s/Version .*(.*)/Version $$V/g" iselect_readme.txt.n && mv iselect_readme.txt.n iselect_readme.txt; + +release: distclean fixperm + @$(_GETDISTINFO) \ + _distname="iselect-$${_version}"; \ + _tarball="/tmp/$${_distname}.tar.gz"; \ + echo "Release Distribution: iSelect Version $$_version"; \ + $(_BUILDDIST); \ + mv /tmp/$${_distname}.tar.gz $${_distname}.tar.gz; \ + +snap: distclean fixperm + @$(_GETDISTINFO) \ + _distname="iselect-$${_version}-SNAP-$$_date"; \ + _tarball="/tmp/$${_distname}.tar.gz"; \ + echo "Snap of whole source tree: iSelect Version $$_version as of $$_date"; \ + $(_BUILDDIST); \ + mv /tmp/$${_distname}.tar.gz $${_distname}.tar.gz + +new-version: + OPT="-iv"; $(_NEWVERS) +new-revision: + OPT="-ir"; $(_NEWVERS) +new-betalevel: + OPT="-ib"; $(_NEWVERS) +new-patchlevel: + OPT="-iP"; $(_NEWVERS) +new-release: + OPT="-s$(R)"; $(_NEWVERS) +update-version: + $(_UPDATEVERS) + +fixperm: + $(FIXPERM) * + +# ------------------------------------------------ +# THE PROGRAM +# ------------------------------------------------ + +iselect: iselect_main.o iselect_browse.o iselect_keys.o iselect_getopt.o iselect_version.o iselect_help.o iselect_readme.o + $(CC) $(LDFLAGS) -o iselect iselect_main.o iselect_browse.o iselect_keys.o iselect_getopt.o iselect_version.o iselect_help.o iselect_readme.o @LIBS@ + +iselect_main.o: iselect_main.c + $(CC) $(CFLAGS) -o iselect_main.o -c iselect_main.c + +iselect_browse.o: iselect_browse.c + $(CC) $(CFLAGS) -o iselect_browse.o -c iselect_browse.c + +iselect_keys.o: iselect_keys.c + $(CC) $(CFLAGS) -o iselect_keys.o -c iselect_keys.c + +iselect_getopt.o: iselect_getopt.c + $(CC) $(CFLAGS) -o iselect_getopt.o -c iselect_getopt.c + +iselect_version.o: iselect_version.c + $(CC) $(CFLAGS) -o iselect_version.o -c iselect_version.c + +iselect_help.o: iselect_help.c + $(CC) $(CFLAGS) -o iselect_help.o -c iselect_help.c + +iselect_help.c: iselect_help.txt iselect_version.c + V=`$(NEWVERS) -l c -d long iselect_version.c`; \ + ./etc/asc2c iselect_help.txt iselect_help iSelect_Help "$$V" + +iselect_readme.o: iselect_readme.c + $(CC) $(CFLAGS) -o iselect_readme.o -c iselect_readme.c + +iselect_readme.c: iselect_readme.txt iselect_version.c + V=`$(NEWVERS) -l c -d long iselect_version.c`; \ + ./etc/asc2c iselect_readme.txt iselect_readme iSelect_README "$$V" + +# ------------------------------------------------ +# THE DOCUMENTATION +# ------------------------------------------------ + +iselect.1: iselect.pod iselect_version.c + V=`$(NEWVERS) -l c -d long iselect_version.c`; \ + sed -e "s|\@V\@|$$V|g" \ + /tmp/iselect.pod; \ + pod2man --section=1 \ + --center="Ralf S. Engelschall" \ + --release="EN" \ + /tmp/iselect.pod >iselect.1 && \ + rm -f /tmp/iselect.pod + +# ------------------------------------------------ +# INSTALLATION +# ------------------------------------------------ + +install: all + $(MKDIR) $(bindir) + $(MKDIR) $(mandir)/man1 + $(INSTALL) -c -m 755 -s iselect $(bindir)/iselect + $(INSTALL) -c -m 644 iselect.1 $(mandir)/man1/iselect.1 + +# ------------------------------------------------ +# CLEANUP +# ------------------------------------------------ + +clean: + -rm -f *.o + -rm -f iselect + -rm -f core *.core + +distclean: clean + -rm -f config_ac.h config_sc.h + -rm -f config.status config.cache config.log + -rm -f Makefile + +##EOF## Index: ossp-pkg/iselect/configure RCS File: /v/ossp/cvs/ossp-pkg/iselect/configure,v co -q -kk -p'1.2' '/v/ossp/cvs/ossp-pkg/iselect/configure,v' | diff -u /dev/null - -L'ossp-pkg/iselect/configure' 2>/dev/null --- ossp-pkg/iselect/configure +++ - 2024-05-08 19:01:27.829295821 +0200 @@ -0,0 +1,1698 @@ +#! /bin/sh + +# From configure.in Revision: 1.12 +SHTOOL="./etc/shtool" +T_MD=`$SHTOOL echo -e %B 2>/dev/null` +T_ME=`$SHTOOL echo -e %b 2>/dev/null` +echo "${T_MD}Configuring for iSelect `./etc/shtool version -lc -dlong iselect_version.c`${T_ME}" +echo "Copyright (c) 1996-1999 Ralf S. Engelschall, All Rights Reserved." + + + + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.14 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_default_prefix=/usr/local +ac_help="$ac_help + --enable-debug to enable the debugging options for compilation" +ac_help="$ac_help + --with-incdir=DIR add DIR to the include path" +ac_help="$ac_help + --with-libdir=DIR add DIR to the library path" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.14" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=README + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + + +echo "$ac_t""" 1>&6 +echo "$ac_t""${T_MD}CHECK: Build Environment${T_ME}" 1>&6 + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:551: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:581: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:632: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:664: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 675 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:680: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:706: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:711: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:739: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +echo "configure:771: checking how to run the C preprocessor" >&5 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:792: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:809: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:826: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + + +echo $ac_n "checking for compilation debug mode""... $ac_c" 1>&6 +echo "configure:852: checking for compilation debug mode" >&5 +# Check whether --enable-debug or --disable-debug was given. +if test "${enable_debug+set}" = set; then + enableval="$enable_debug" + x="enabled" +CFLAGS="-Wall -g -ggdb3" +LDFLAGS="-g -ggdb3" +debug=on + +else + x=disabled +CFLAGS="-O2" +LDFLAGS="" +debug=off + +fi + +echo "$ac_t""$x" 1>&6 + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:872: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + + +echo "$ac_t""" 1>&6 +echo "$ac_t""${T_MD}CHECK: Curses Environment${T_ME}" 1>&6 + + +echo $ac_n "checking for additional include dir""... $ac_c" 1>&6 +echo "configure:905: checking for additional include dir" >&5 +# Check whether --with-incdir or --without-incdir was given. +if test "${with_incdir+set}" = set; then + withval="$with_incdir" + CFLAGS="$CFLAGS -I$with_incdir" +CPPFLAGS="$CPPFLAGS -I$with_incdir" +x="$with_incdir" + +else + x="none particular" + +fi +echo "$ac_t""$x" 1>&6 +echo $ac_n "checking for additional library dir""... $ac_c" 1>&6 +echo "configure:919: checking for additional library dir" >&5 +# Check whether --with-libdir or --without-libdir was given. +if test "${with_libdir+set}" = set; then + withval="$with_libdir" + LDFLAGS="$LDFLAGS -L$with_libdir" +x="$with_libdir" + +else + x="none particular" + +fi +echo "$ac_t""$x" 1>&6 + +ac_safe=`echo "ncurses.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for ncurses.h""... $ac_c" 1>&6 +echo "configure:934: checking for ncurses.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:944: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + HAVE_NCURSES_HEADER=YES +else + echo "$ac_t""no" 1>&6 +HAVE_NCURSES_HEADER=NO +fi + +echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6 +echo "configure:967: checking for initscr in -lncurses" >&5 +ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lncurses $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + HAVE_NCURSES_LIB=YES +else + echo "$ac_t""no" 1>&6 +HAVE_NCURSES_LIB=NO +fi + +ac_safe=`echo "slcurses.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for slcurses.h""... $ac_c" 1>&6 +echo "configure:1009: checking for slcurses.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + HAVE_SLCURSES_HEADER=YES +else + echo "$ac_t""no" 1>&6 +HAVE_SLCURSES_HEADER=NO +fi + +OLIBS=$LIBS +LIBS="$LIBS -ltermcap" +echo $ac_n "checking for SLcurses_initscr in -lslang""... $ac_c" 1>&6 +echo "configure:1044: checking for SLcurses_initscr in -lslang" >&5 +ac_lib_var=`echo slang'_'SLcurses_initscr | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lslang $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + HAVE_SLCURSES_LIB=YES +else + echo "$ac_t""no" 1>&6 +HAVE_SLCURSES_LIB=NO +fi + +LIBS=$OLIBS +if test ".$HAVE_NCURSES_HEADER.$HAVE_NCURSES_LIB." = .YES.YES.; then + USE_NCURSES=YES + cat >> confdefs.h <<\EOF +#define USE_NCURSES 1 +EOF + + LIBS="$LIBS -lncurses" + echo $ac_n "checking which Curses to use""... $ac_c" 1>&6 +echo "configure:1093: checking which Curses to use" >&5 + echo "$ac_t""GNU NCurses" 1>&6 +else + if test ".$HAVE_SLCURSES_HEADER.$HAVE_SLCURSES_LIB." = .YES.YES.; then + USE_SLCURSES=YES + cat >> confdefs.h <<\EOF +#define USE_SLCURSES 1 +EOF + + LIBS="$LIBS -lslang -ltermcap" + echo $ac_n "checking which Curses to use""... $ac_c" 1>&6 +echo "configure:1104: checking which Curses to use" >&5 + echo "$ac_t""S-Lang Curses" 1>&6 + else + USE_CURSES=YES + cat >> confdefs.h <<\EOF +#define USE_CURSES 1 +EOF + + LIBS="$LIBS -lcurses" + echo $ac_n "checking which Curses to use""... $ac_c" 1>&6 +echo "configure:1114: checking which Curses to use" >&5 + echo "$ac_t""Vendor Curses" 1>&6 + fi +fi + +echo "$ac_t""" 1>&6 +echo "$ac_t""${T_MD}CHECK: System Ingredients${T_ME}" 1>&6 + +echo $ac_n "checking for working const""... $ac_c" 1>&6 +echo "configure:1123: checking for working const" >&5 +if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <j = 5; +} +{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; +} + +; return 0; } +EOF +if { (eval echo configure:1177: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_const=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_c_const=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_c_const" 1>&6 +if test $ac_cv_c_const = no; then + cat >> confdefs.h <<\EOF +#define const +EOF + +fi + +echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +echo "configure:1198: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#include +#include +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else + cat > conftest.$ac_ext < +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +if { (eval echo configure:1278: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_header_stdc=no +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + +for ac_hdr in stdio.h stddef.h string.h strings.h stdlib.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:1305: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1315: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + + +echo "$ac_t""" 1>&6 +echo "$ac_t""${T_MD}RESULT: Sourcefile Substitution${T_ME}" 1>&6 + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +DEFS=-DHAVE_CONFIG_H + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.14" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir + +trap 'rm -fr `echo "Makefile config_sc.h config_ac.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@CC@%$CC%g +s%@CPP@%$CPP%g +s%@debug@%$debug%g +s%@SET_MAKE@%$SET_MAKE%g +s%@SHTOOL@%$SHTOOL%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +ac_dC='\3' +ac_dD='%g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)%\1#\2define\3' +ac_uC=' ' +ac_uD='\4%g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$%\1#\2define\3' +ac_eC=' ' +ac_eD='%g' + +if test "${CONFIG_HEADERS+set}" != set; then +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +fi +for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + echo creating $ac_file + + rm -f conftest.frag conftest.in conftest.out + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + cat $ac_file_inputs > conftest.in + +EOF + +# Transform confdefs.h into a sed script conftest.vals that substitutes +# the proper values into config.h.in to produce config.h. And first: +# Protect against being on the right side of a sed subst in config.status. +# Protect against being in an unquoted here document in config.status. +rm -f conftest.vals +cat > conftest.hdr <<\EOF +s/[\\&%]/\\&/g +s%[\\$`]%\\&%g +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +s%ac_d%ac_u%gp +s%ac_u%ac_e%gp +EOF +sed -n -f conftest.hdr confdefs.h > conftest.vals +rm -f conftest.hdr + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >> conftest.vals <<\EOF +s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +EOF + +# Break up conftest.vals because some shells have a limit on +# the size of here documents, and old seds have small limits too. + +rm -f conftest.tail +while : +do + ac_lines=`grep -c . conftest.vals` + # grep -c gives empty output for an empty file on some AIX systems. + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + # Write a limited-size here document to conftest.frag. + echo ' cat > conftest.frag <> $CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + echo 'CEOF + sed -f conftest.frag conftest.in > conftest.out + rm -f conftest.in + mv conftest.out conftest.in +' >> $CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail + rm -f conftest.vals + mv conftest.tail conftest.vals +done +rm -f conftest.vals + +cat >> $CONFIG_STATUS <<\EOF + rm -f conftest.frag conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.in >> conftest.h + rm -f conftest.in + if cmp -s $ac_file conftest.h 2>/dev/null; then + echo "$ac_file is unchanged" + rm -f conftest.h + else + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + fi + rm -f $ac_file + mv conftest.h $ac_file + fi +fi; done + +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + +echo "" +echo "Now please type 'make' to compile. Good luck." +echo "" + Index: ossp-pkg/iselect/configure.in RCS File: /v/ossp/cvs/ossp-pkg/iselect/configure.in,v co -q -kk -p'1.2' '/v/ossp/cvs/ossp-pkg/iselect/configure.in,v' | diff -u /dev/null - -L'ossp-pkg/iselect/configure.in' 2>/dev/null --- ossp-pkg/iselect/configure.in +++ - 2024-05-08 19:01:27.835051771 +0200 @@ -0,0 +1,109 @@ +nl ## +dnl ## configure.in -- GNU autoconf configuration spec +dnl ## Copyright (c) Ralf S. Engelschall, +dnl ## + +AC_PREREQ(2.10)dnl +AC_REVISION($Revision$) +SHTOOL="./etc/shtool" +T_MD=`$SHTOOL echo -e %B 2>/dev/null` +T_ME=`$SHTOOL echo -e %b 2>/dev/null` +echo "${T_MD}Configuring for iSelect `./etc/shtool version -lc -dlong iselect_version.c`${T_ME}" +echo "Copyright (c) 1996-1999 Ralf S. Engelschall, All Rights Reserved." + +AC_INIT(README) +AC_CONFIG_HEADER(config_ac.h)dnl +AC_PREFIX_DEFAULT(/usr/local) + +AC_CONFIGURE_PART(CHECK: Build Environment) + +AC_PROG_CC +AC_PROG_CPP + +AC_MSG_CHECKING(for compilation debug mode) +AC_ARG_ENABLE(debug,dnl +[ --enable-debug to enable the debugging options for compilation], +x="enabled" +CFLAGS="-Wall -g -ggdb3" +LDFLAGS="-g -ggdb3" +debug=on +, +x=disabled +CFLAGS="-O2" +LDFLAGS="" +debug=off +)dnl +AC_SUBST(debug) +AC_MSG_RESULT([$x]) + +AC_SET_MAKE +AC_SUBST(SHTOOL) + +AC_CONFIGURE_PART(CHECK: Curses Environment) + +AC_MSG_CHECKING(for additional include dir) +AC_ARG_WITH(incdir,dnl +[ --with-incdir=DIR add DIR to the include path], +CFLAGS="$CFLAGS -I$with_incdir" +CPPFLAGS="$CPPFLAGS -I$with_incdir" +x="$with_incdir" +, +x="none particular" +)dnl +AC_MSG_RESULT([$x]) +AC_MSG_CHECKING(for additional library dir) +AC_ARG_WITH(libdir,dnl +[ --with-libdir=DIR add DIR to the library path], +LDFLAGS="$LDFLAGS -L$with_libdir" +x="$with_libdir" +, +x="none particular" +)dnl +AC_MSG_RESULT([$x]) + +AC_CHECK_HEADER(ncurses.h, HAVE_NCURSES_HEADER=YES, HAVE_NCURSES_HEADER=NO) +AC_CHECK_LIB(ncurses, initscr, HAVE_NCURSES_LIB=YES, HAVE_NCURSES_LIB=NO) +AC_CHECK_HEADER(slcurses.h, HAVE_SLCURSES_HEADER=YES, HAVE_SLCURSES_HEADER=NO) +OLIBS=$LIBS +LIBS="$LIBS -ltermcap" +AC_CHECK_LIB(slang, SLcurses_initscr, HAVE_SLCURSES_LIB=YES, HAVE_SLCURSES_LIB=NO) +LIBS=$OLIBS +if test ".$HAVE_NCURSES_HEADER.$HAVE_NCURSES_LIB." = .YES.YES.; then + USE_NCURSES=YES + AC_DEFINE(USE_NCURSES) + LIBS="$LIBS -lncurses" + AC_MSG_CHECKING([which Curses to use]) + AC_MSG_RESULT([GNU NCurses]) +else + if test ".$HAVE_SLCURSES_HEADER.$HAVE_SLCURSES_LIB." = .YES.YES.; then + USE_SLCURSES=YES + AC_DEFINE(USE_SLCURSES) + LIBS="$LIBS -lslang -ltermcap" + AC_MSG_CHECKING([which Curses to use]) + AC_MSG_RESULT([S-Lang Curses]) + else + USE_CURSES=YES + AC_DEFINE(USE_CURSES) + LIBS="$LIBS -lcurses" + AC_MSG_CHECKING([which Curses to use]) + AC_MSG_RESULT([Vendor Curses]) + fi +fi + +AC_CONFIGURE_PART(CHECK: System Ingredients) +AC_CONST +AC_STDC_HEADERS +AC_HAVE_HEADERS(stdio.h stddef.h string.h strings.h stdlib.h) + +AC_CONFIGURE_PART(RESULT: Sourcefile Substitution) +AC_OUTPUT(dnl +Makefile dnl +config_sc.h dnl +,dnl +)dnl + +echo "" +echo "Now please type 'make' to compile. Good luck." +echo "" + +dnl ##EOF## Index: ossp-pkg/iselect/iselect.1 RCS File: /v/ossp/cvs/ossp-pkg/iselect/iselect.1,v co -q -kk -p'1.2' '/v/ossp/cvs/ossp-pkg/iselect/iselect.1,v' | diff -u /dev/null - -L'ossp-pkg/iselect/iselect.1' 2>/dev/null --- ossp-pkg/iselect/iselect.1 +++ - 2024-05-08 19:01:27.837668859 +0200 @@ -0,0 +1,471 @@ +.rn '' }` +''' $RCSfile$$Revision$$Date$ +''' +''' $Log$ +''' Revision 1.2 2000/07/25 11:53:24 rse +''' Merge in pending changes +''' +''' +.de Sh +.br +.if t .Sp +.ne 5 +.PP +\fB\\$1\fR +.PP +.. +.de Sp +.if t .sp .5v +.if n .sp +.. +.de Ip +.br +.ie \\n(.$>=3 .ne \\$3 +.el .ne 3 +.IP "\\$1" \\$2 +.. +.de Vb +.ft CW +.nf +.ne \\$1 +.. +.de Ve +.ft R + +.fi +.. +''' +''' +''' Set up \*(-- to give an unbreakable dash; +''' string Tr holds user defined translation string. +''' Bell System Logo is used as a dummy character. +''' +.tr \(*W-|\(bv\*(Tr +.ie n \{\ +.ds -- \(*W- +.ds PI pi +.if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch +.if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch +.ds L" "" +.ds R" "" +''' \*(M", \*(S", \*(N" and \*(T" are the equivalent of +''' \*(L" and \*(R", except that they are used on ".xx" lines, +''' such as .IP and .SH, which do another additional levels of +''' double-quote interpretation +.ds M" """ +.ds S" """ +.ds N" """"" +.ds T" """"" +.ds L' ' +.ds R' ' +.ds M' ' +.ds S' ' +.ds N' ' +.ds T' ' +'br\} +.el\{\ +.ds -- \(em\| +.tr \*(Tr +.ds L" `` +.ds R" '' +.ds M" `` +.ds S" '' +.ds N" `` +.ds T" '' +.ds L' ` +.ds R' ' +.ds M' ` +.ds S' ' +.ds N' ` +.ds T' ' +.ds PI \(*p +'br\} +.\" If the F register is turned on, we'll generate +.\" index entries out stderr for the following things: +.\" TH Title +.\" SH Header +.\" Sh Subsection +.\" Ip Item +.\" X<> Xref (embedded +.\" Of course, you have to process the output yourself +.\" in some meaninful fashion. +.if \nF \{ +.de IX +.tm Index:\\$1\t\\n%\t"\\$2" +.. +.nr % 0 +.rr F +.\} +.TH ISELECT 1 "EN" "22/Jun/1999" "Ralf S. Engelschall" +.UC +.if n .hy 0 +.if n .na +.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p' +.de CQ \" put $1 in typewriter font +.ft CW +'if n "\c +'if t \\&\\$1\c +'if n \\&\\$1\c +'if n \&" +\\&\\$2 \\$3 \\$4 \\$5 \\$6 \\$7 +'.ft R +.. +.\" @(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2 +. \" AM - accent mark definitions +.bd B 3 +. \" fudge factors for nroff and troff +.if n \{\ +. ds #H 0 +. ds #V .8m +. ds #F .3m +. ds #[ \f1 +. ds #] \fP +.\} +.if t \{\ +. ds #H ((1u-(\\\\n(.fu%2u))*.13m) +. ds #V .6m +. ds #F 0 +. ds #[ \& +. ds #] \& +.\} +. \" simple accents for nroff and troff +.if n \{\ +. ds ' \& +. ds ` \& +. ds ^ \& +. ds , \& +. ds ~ ~ +. ds ? ? +. ds ! ! +. ds / +. ds q +.\} +.if t \{\ +. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" +. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' +. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' +. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' +. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' +. ds ? \s-2c\h'-\w'c'u*7/10'\u\h'\*(#H'\zi\d\s+2\h'\w'c'u*8/10' +. ds ! \s-2\(or\s+2\h'-\w'\(or'u'\v'-.8m'.\v'.8m' +. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' +. ds q o\h'-\w'o'u*8/10'\s-4\v'.4m'\z\(*i\v'-.4m'\s+4\h'\w'o'u*8/10' +.\} +. \" troff and (daisy-wheel) nroff accents +.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V' +.ds 8 \h'\*(#H'\(*b\h'-\*(#H' +.ds v \\k:\h'-(\\n(.wu*9/10-\*(#H)'\v'-\*(#V'\*(#[\s-4v\s0\v'\*(#V'\h'|\\n:u'\*(#] +.ds _ \\k:\h'-(\\n(.wu*9/10-\*(#H+(\*(#F*2/3))'\v'-.4m'\z\(hy\v'.4m'\h'|\\n:u' +.ds . \\k:\h'-(\\n(.wu*8/10)'\v'\*(#V*4/10'\z.\v'-\*(#V*4/10'\h'|\\n:u' +.ds 3 \*(#[\v'.2m'\s-2\&3\s0\v'-.2m'\*(#] +.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#] +.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H' +.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u' +.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#] +.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#] +.ds ae a\h'-(\w'a'u*4/10)'e +.ds Ae A\h'-(\w'A'u*4/10)'E +.ds oe o\h'-(\w'o'u*4/10)'e +.ds Oe O\h'-(\w'O'u*4/10)'E +. \" corrections for vroff +.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u' +.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u' +. \" for low resolution devices (crt and lpr) +.if \n(.H>23 .if \n(.V>19 \ +\{\ +. ds : e +. ds 8 ss +. ds v \h'-1'\o'\(aa\(ga' +. ds _ \h'-1'^ +. ds . \h'-1'. +. ds 3 3 +. ds o a +. ds d- d\h'-1'\(ga +. ds D- D\h'-1'\(hy +. ds th \o'bp' +. ds Th \o'LP' +. ds ae ae +. ds Ae AE +. ds oe oe +. ds Oe OE +.\} +.rm #[ #] #H #V #F C +.SH "NAME" +iSelect -- Interactive Selection Tool +.SH "SYNOPSIS" +\fBiselect\fR +[\fB\-d\fR \fISTR\fR,\fISTR\fR] +[\fB\-c\fR] +[\fB\-f\fR] +[\fB\-a\fR] +[\fB\-e\fR] +[\fB\-p\fR \fINUM\fR] +[\fB\-k\fR \fIKEY\fR[:\fIOKEY\fR]] +[\fB\-m\fR] +[\fB\-n\fR \fISTR\fR] +[\fB\-t\fR \fISTR\fR] +[\fB\-S\fR] +[\fB\-K\fR] +[\fB\-P\fR] +[\fB\-Q\fR \fISTR\fR] +[\fIline1\fR \fIline2\fR ...] +.PP +\fBiselect\fR +[\fB\-V\fR] +.SH "VERSION" +1.2.0 (31-Mar-1999) +.SH "DESCRIPTION" +.Sh "Intend" +iSelect is an interactive line selection tool for \s-1ASCII\s0 files, operating via a +full-screen Curses-based terminal session. It can be used either as an user +interface frontend controlled by a Bourne-Shell, Perl or other type of script +backend as its wrapper or in batch as a pipe filter (usually between \fIgrep\fR +and the final executing command). In other words: iSelect was designed to be +used for any types of interactice line-based selections. +.Sh "Input Data" +Input is read either from the command line (\fIline1\fR \fIline2\fR ...) where each +argument corresponds to one buffer line or from \fIstdin\fR (when no arguments +are given) where the buffer lines are determined according to the newline +characters. +.PP +You can additionally let substrings displayed in Bold mode for non-selectable +lines (because the selectable lines are always displayed bold) by using the +construct ``\f(CW\fR...\f(CW\fR'\*(R' as in \s-1HTML\s0. +.Sh "Selections" +The selection is either just a single line (default) or multiple lines (option +\fB\-m\fR). Per default no lines are selectable. If a line contains the string +``\f(CW\fR'\*(R' (or a string with different delimiters configured via +option \fB\-d\fR) at any position this string is stripped and the line is +selectable. Its result (printed to \fIstdout\fR) is the line contents itself (but +without the ``\f(CW\fR'\*(R' string of course). If option \fB\-a\fR is used all +lines are selectable and their result is again the line itself, i.e. using +option \fB\-a\fR is the same as adding ``\f(CW\fR'\*(R' to every line of the +input data. When you want a specific result (i.e. not just the line contents +itself), you have to use the special variant ``\f(CW\fR'\*(R' +which results in the output ``\f(CWresult text\fR'\*(R' when the corresponding line is +selected. +.PP +When you use a specific result via ``\f(CW\fR'\*(R' the \fIresult +text\fR can contain ``\f(CW%[query text]s\fR'\*(R' and ``\f(CW%[query text]S\fR'\*(R' +constructs. For every such construct an interactive query is done and the +result replaces the construct. The ``\f(CW%[query text]S\fR'\*(R' construct is like +``\f(CW%[query text]s\fR'\*(R' except that the empty string as the query result is not +accepted on input. +.PP +The Curses-based full-screen selection is always done via \fI/dev/tty\fR, because +the \fIstdin\fR and \fIstdout\fR filehandles are usually tied to the input and +output data streams. +.Sh "Output Data" +The output is the line itself or the string given with ``\f(CW\fR'\*(R'. When multiple line selection mode (option \fB\-m\fR) is used the +output is all selected lines theirself or their configured result strings. +Output always is written to \fIstdout\fR. +.SH "OPTIONS" +.Sh "Input Options" +These options control how \fIiSelect\fR parses its input. +.Ip "\fB\-d\fR \fI\s-1STR\s0\fR, \fB--delimiter=\fR\fI\s-1STR\s0\fR" 4 +Sets the delimiters for the selection tags. The default is `\f(CW<,>\fR\*(R', +i.e. the selection tags have to read ``\f(CW\fR'\*(R' and ``\f(CW\fR'\*(R' +.Ip "\fB\-c\fR, \fB--strip-comments\fR" 4 +Strips all sharp comment lines from the input buffer before parsing. +.Ip "\fB\-f\fR, \fB--force-browse\fR" 4 +Browse always, i.e. even when the input buffer contains no or only one line. +.Ip "\fB\-a\fR, \fB--all-select\fR" 4 +Force all lines to be selectable. +.Ip "\fB\-e\fR, \fB--exit-no-select\fR" 4 +Exit immediately if no lines are selectable. In this case not even the Curses +screen is initialized. +.Sh "Display Options" +.Ip "\fB\-p\fR \fI\s-1NUM\s0\fR, \fB--position=\fR\fI\s-1NUM\s0\fR" 4 +Sets the cursor position to line \fI\s-1NUM\s0\fR. +.Ip "\fB\-k\fR \fI\s-1KEY\s0\fR[:\fI\s-1OKEY\s0\fR], \fB--key=\fR\fI\s-1KEY\s0[:\fI\s-1OKEY\s0\fR]\fR" 4 +Defines an additional input key. Per default \fI\s-1OKEY\s0\fR is \f(CWRETURN\fR, i.e. for +instance \fB\-kf\fR defines another selection key `\f(CWf\fR\*(R'. +.Ip "\fB\-m\fR, \fB--multi-line\fR" 4 +Enable multi-line selection where you can select more then one line via \s-1SPACE\s0 +key. +.Ip "\fB\-n\fR \fI\s-1STR\s0\fR, \fB--name=\fR\fI\s-1STR\s0\fR" 4 +Sets the name string, displayed flush left at the bottom of the +browser window. +.Ip "\fB\-t\fR \fI\s-1STR\s0\fR, \fB--title=\fR\fI\s-1STR\s0\fR" 4 +Sets the title bar string, displayed centered at the bottom of the +browser window. +.Sh "Output Options" +.Ip "\fB\-S\fR, \fB--strip-result\fR" 4 +Strip all leading and trailing whitespaces from the result string. +.Ip "\fB\-K\fR, \fB--key-result\fR" 4 +Prefix the result string (given on \fIstdout\fR) with the corresponding selection +key which was used. This usually is \f(CWRETURN\fR or \f(CWKEY_RIGHT\fR but can be any +of the additional keys defined by option \fB\-k\fR. When you use \fB\-kf\fR and +select a line \f(CWFoo Bar\fR with key `\f(CWf\fR\*(R' the result string is ``\f(CWf:Foo +Bar\fR'\*(R'. +.Ip "\fB\-P\fR, \fB--position-result\fR" 4 +Prefix the result string (given on \fIstdout\fR) with the corresponding cursor +position followed by a colon. When you selected line \fIN\fR and this line has +the result \f(CWFoo Bar\fR configured the result string is ``\f(CWN:Foo Bar\fR'\*(R'. +.Ip "\fB\-Q\fR \fI\s-1STR\s0\fR, \fB--quit-result=\fR\fI\s-1STR\s0\fR" 4 +Sets the result string on quit. Default is the empty string. +.Sh "Giving Feedback" +.Ip "\fB\-V\fR, \fB--version\fR" 4 +Displays version identification string. +.SH "KEYSTROKES" +.Sh "Cursor Movement" +Use these to browse through the selection list. +.PP +.Vb 6 +\& CURSOR-UP ..... Move cursor one line up +\& CURSOR-DOWN ... Move cursor one line down +\& PAGE-UP ....... Move cursor one page up +\& PAGE-DOWN ..... Move cursor one page down +\& g ............. Goto first line +\& G ............. Goto last line +.Ve +.Sh "Line Selection" +Use these to select one line and exit in standard mode or one or more lines in +multi-line mode. +.PP +.Vb 3 +\& RETURN ........ Select line and exit +\& CURSOR-RIGHT .. Select line and exit +\& SPACE ......... Select line and stay (multi-line mode only) +.Ve +.Sh "Others" +Use these to quit iSelect or to show its help and +version page. +.PP +.Vb 4 +\& q ............. Quit (exit without selection) +\& CURSOR-LEFT ... Quit (exit without selection) +\& h ............. Help Page +\& v ............. Version Page +.Ve +.SH "EXAMPLE" +As an example we present a real-life situation where iSelect can enhance an +existing functionality. We define two Bash functions (for your +\fI$HOME/.bashrc\fR file) which enhance the built-in `\fIcd\fR\*(R' command of the +shell. +.PP +.Vb 7 +\& # database scan for enhanced cd command +\& cds () { +\& (cd $HOME; +\& find . -type d -print |\e +\& sed -e "s;^\e.;$HOME;" |\e +\& sort -u >$HOME/.cdpaths ) & +\& } +.Ve +.Vb 11 +\& # definition of the enhanced cd command +\& cd () { +\& if [ -d $1 ]; then +\& builtin cd $1 +\& else +\& builtin cd `egrep "/$1[^/]*$" $HOME/.cdpaths |\e +\& iselect -a -Q $1 -n "chdir" \e +\& -t "Change Directory to..."` +\& fi +\& PS1="\eu@\eh:$PWD\en:> " +\& } +.Ve +This new `\fIcd\fR\*(R' command is compatible with Bashs built-in variant for the case +where the specified directory actually exists. When it doesn't, the original +`\fIcd\fR\*(R' would immediately give an error (assuming we have no \fICDPATH\fR +variable defined). Here this enhanced version tries harder. First it searches +for such a directory in a previously built (via \fIcds\fR) \fI$HOME/.cdpaths\fR +files. When no line was found, iSelect just returns the given directory as the +default result and `\fIcd\fR\*(R' then fails as usual with an error message. When +only one directory was found, iSelect directly results this particular line to +`\fIcd\fR\*(R'. And only when more then one directory was found, iSelect opens its +Curses-based selection screen and lets the user choose interactively between +those directories. The chosen directory is then finally given to `\fIcd\fR\*(R'. +.PP +For more useful examples on how to use iSelect, see the \fIcontrib/\fR directory +of the iSelect distribution tarball. +.SH "AUTHOR" +.PP +.Vb 3 +\& Ralf S. Engelschall +\& rse@engelschall.com +\& www.engelschall.com +.Ve +.SH "SEE ALSO" +.PP +.Vb 1 +\& iSelect Home: http://www.engelschall.com/sw/iselect/ +.Ve + +.rn }` '' +.IX Title "ISELECT 1" +.IX Name "iSelect - Interactive Selection Tool" + +.IX Header "NAME" + +.IX Header "SYNOPSIS" + +.IX Header "VERSION" + +.IX Header "DESCRIPTION" + +.IX Subsection "Intend" + +.IX Subsection "Input Data" + +.IX Subsection "Selections" + +.IX Subsection "Output Data" + +.IX Header "OPTIONS" + +.IX Subsection "Input Options" + +.IX Item "\fB\-d\fR \fI\s-1STR\s0\fR, \fB--delimiter=\fR\fI\s-1STR\s0\fR" + +.IX Item "\fB\-c\fR, \fB--strip-comments\fR" + +.IX Item "\fB\-f\fR, \fB--force-browse\fR" + +.IX Item "\fB\-a\fR, \fB--all-select\fR" + +.IX Item "\fB\-e\fR, \fB--exit-no-select\fR" + +.IX Subsection "Display Options" + +.IX Item "\fB\-p\fR \fI\s-1NUM\s0\fR, \fB--position=\fR\fI\s-1NUM\s0\fR" + +.IX Item "\fB\-k\fR \fI\s-1KEY\s0\fR[:\fI\s-1OKEY\s0\fR], \fB--key=\fR\fI\s-1KEY\s0[:\fI\s-1OKEY\s0\fR]\fR" + +.IX Item "\fB\-m\fR, \fB--multi-line\fR" + +.IX Item "\fB\-n\fR \fI\s-1STR\s0\fR, \fB--name=\fR\fI\s-1STR\s0\fR" + +.IX Item "\fB\-t\fR \fI\s-1STR\s0\fR, \fB--title=\fR\fI\s-1STR\s0\fR" + +.IX Subsection "Output Options" + +.IX Item "\fB\-S\fR, \fB--strip-result\fR" + +.IX Item "\fB\-K\fR, \fB--key-result\fR" + +.IX Item "\fB\-P\fR, \fB--position-result\fR" + +.IX Item "\fB\-Q\fR \fI\s-1STR\s0\fR, \fB--quit-result=\fR\fI\s-1STR\s0\fR" + +.IX Subsection "Giving Feedback" + +.IX Item "\fB\-V\fR, \fB--version\fR" + +.IX Header "KEYSTROKES" + +.IX Subsection "Cursor Movement" + +.IX Subsection "Line Selection" + +.IX Subsection "Others" + +.IX Header "EXAMPLE" + +.IX Header "AUTHOR" + +.IX Header "SEE ALSO" + Index: ossp-pkg/iselect/iselect_version.c RCS File: /v/ossp/cvs/ossp-pkg/iselect/iselect_version.c,v rcsdiff -q -kk '-r1.2' '-r1.3' -u '/v/ossp/cvs/ossp-pkg/iselect/iselect_version.c,v' 2>/dev/null