ossp-pkg/sio/BRAINSTORM/openssl-bio.txt
1.1
BIO Routines
This documentation is rather sparse, you are probably best
off looking at the code for specific details.
The BIO library is a IO abstraction that was originally
inspired by the need to have callbacks to perform IO to FILE
pointers when using Windows 3.1 DLLs. There are two types
of BIO; a source/sink type and a filter type.
The source/sink methods are as follows:
- BIO_s_mem() memory buffer - a read/write byte array that
grows until memory runs out :-).
- BIO_s_file() FILE pointer - A wrapper around the normal
'FILE *' commands, good for use with stdin/stdout.
- BIO_s_fd() File descriptor - A wrapper around file
descriptors, often used with pipes.
- BIO_s_socket() Socket - Used around sockets. It is
mostly in the Microsoft world that sockets are different
from file descriptors and there are all those ugly winsock
commands.
- BIO_s_null() Null - read nothing and write nothing.; a
useful endpoint for filter type BIO's specifically things
like the message digest BIO.
The filter types are
- BIO_f_buffer() IO buffering - does output buffering into
larger chunks and performs input buffering to allow gets()
type functions.
- BIO_f_md() Message digest - a transparent filter that can
be asked to return a message digest for the data that has
passed through it.
- BIO_f_cipher() Encrypt or decrypt all data passing
through the filter.
- BIO_f_base64() Base64 decode on read and encode on write.
- BIO_f_ssl() A filter that performs SSL encryption on the
data sent through it.
Base BIO functions.
The BIO library has a set of base functions that are
implemented for each particular type. Filter BIOs will
normally call the equivalent function on the source/sink BIO
that they are layered on top of after they have performed
some modification to the data stream. Multiple filter BIOs
can be 'push' into a stack of modifers, so to read from a
file, unbase64 it, then decrypt it, a BIO_f_cipher,
BIO_f_base64 and a BIO_s_file would probably be used. If a
sha-1 and md5 message digest needed to be generated, a stack
two BIO_f_md() BIOs and a BIO_s_null() BIO could be used.
The base functions are
- BIO *BIO_new(BIO_METHOD *type); Create a new BIO of type 'type'.
- int BIO_free(BIO *a); Free a BIO structure. Depending on
the configuration, this will free the underlying data
object for a source/sink BIO.
- int BIO_read(BIO *b, char *data, int len); Read upto 'len'
bytes into 'data'.
- int BIO_gets(BIO *bp,char *buf, int size); Depending on
the BIO, this can either be a 'get special' or a get one
line of data, as per fgets();
- int BIO_write(BIO *b, char *data, int len); Write 'len'
bytes from 'data' to the 'b' BIO.
- int BIO_puts(BIO *bp,char *buf); Either a 'put special' or
a write null terminated string as per fputs().
- long BIO_ctrl(BIO *bp,int cmd,long larg,char *parg); A
control function which is used to manipulate the BIO
structure and modify it's state and or report on it. This
function is just about never used directly, rather it
should be used in conjunction with BIO_METHOD specific
macros.
- BIO *BIO_push(BIO *new_top, BIO *old); new_top is apped to the
top of the 'old' BIO list. new_top should be a filter BIO.
All writes will go through 'new_top' first and last on read.
'old' is returned.
- BIO *BIO_pop(BIO *bio); the new topmost BIO is returned, NULL if
there are no more.
If a particular low level BIO method is not supported
(normally BIO_gets()), -2 will be returned if that method is
called. Otherwise the IO methods (read, write, gets, puts)
will return the number of bytes read or written, and 0 or -1
for error (or end of input). For the -1 case,
BIO_should_retry(bio) can be called to determine if it was a
genuine error or a temporary problem. -2 will also be
returned if the BIO has not been initalised yet, in all
cases, the correct error codes are set (accessible via the
ERR library).
The following functions are convenience functions:
- int BIO_printf(BIO *bio, char * format, ..); printf but
to a BIO handle.
- long BIO_ctrl_int(BIO *bp,int cmd,long larg,int iarg); a
convenience function to allow a different argument types
to be passed to BIO_ctrl().
- int BIO_dump(BIO *b,char *bytes,int len); output 'len'
bytes from 'bytes' in a hex dump debug format.
- long BIO_debug_callback(BIO *bio, int cmd, char *argp, int
argi, long argl, long ret) - a default debug BIO callback,
this is mentioned below. To use this one normally has to
use the BIO_set_callback_arg() function to assign an
output BIO for the callback to use.
- BIO *BIO_find_type(BIO *bio,int type); when there is a 'stack'
of BIOs, this function scan the list and returns the first
that is of type 'type', as listed in buffer.h under BIO_TYPE_XXX.
- void BIO_free_all(BIO *bio); Free the bio and all other BIOs
in the list. It walks the bio->next_bio list.
Extra commands are normally implemented as macros calling BIO_ctrl().
- BIO_number_read(BIO *bio) - the number of bytes processed
by BIO_read(bio,.).
- BIO_number_written(BIO *bio) - the number of bytes written
by BIO_write(bio,.).
- BIO_reset(BIO *bio) - 'reset' the BIO.
- BIO_eof(BIO *bio) - non zero if we are at the current end
of input.
- BIO_set_close(BIO *bio, int close_flag) - set the close flag.
- BIO_get_close(BIO *bio) - return the close flag.
BIO_pending(BIO *bio) - return the number of bytes waiting
to be read (normally buffered internally).
- BIO_flush(BIO *bio) - output any data waiting to be output.
- BIO_should_retry(BIO *io) - after a BIO_read/BIO_write
operation returns 0 or -1, a call to this function will
return non zero if you should retry the call later (this
is for non-blocking IO).
- BIO_should_read(BIO *io) - we should retry when data can
be read.
- BIO_should_write(BIO *io) - we should retry when data can
be written.
- BIO_method_name(BIO *io) - return a string for the method name.
- BIO_method_type(BIO *io) - return the unique ID of the BIO method.
- BIO_set_callback(BIO *io, long (*callback)(BIO *io, int
cmd, char *argp, int argi, long argl, long ret); - sets
the debug callback.
- BIO_get_callback(BIO *io) - return the assigned function
as mentioned above.
- BIO_set_callback_arg(BIO *io, char *arg) - assign some
data against the BIO. This is normally used by the debug
callback but could in reality be used for anything. To
get an idea of how all this works, have a look at the code
in the default debug callback mentioned above. The
callback can modify the return values.
Details of the BIO_METHOD structure.
typedef struct bio_method_st
{
int type;
char *name;
int (*bwrite)();
int (*bread)();
int (*bputs)();
int (*bgets)();
long (*ctrl)();
int (*create)();
int (*destroy)();
} BIO_METHOD;
The 'type' is the numeric type of the BIO, these are listed in buffer.h;
'Name' is a textual representation of the BIO 'type'.
The 7 function pointers point to the respective function
methods, some of which can be NULL if not implemented.
The BIO structure
typedef struct bio_st
{
BIO_METHOD *method;
long (*callback)(BIO * bio, int mode, char *argp, int
argi, long argl, long ret);
char *cb_arg; /* first argument for the callback */
int init;
int shutdown;
int flags; /* extra storage */
int num;
char *ptr;
struct bio_st *next_bio; /* used by filter BIOs */
int references;
unsigned long num_read;
unsigned long num_write;
} BIO;
- 'Method' is the BIO method.
- 'callback', when configured, is called before and after
each BIO method is called for that particular BIO. This
is intended primarily for debugging and of informational feedback.
- 'init' is 0 when the BIO can be used for operation.
Often, after a BIO is created, a number of operations may
need to be performed before it is available for use. An
example is for BIO_s_sock(). A socket needs to be
assigned to the BIO before it can be used.
- 'shutdown', this flag indicates if the underlying
comunication primative being used should be closed/freed
when the BIO is closed.
- 'flags' is used to hold extra state. It is primarily used
to hold information about why a non-blocking operation
failed and to record startup protocol information for the
SSL BIO.
- 'num' and 'ptr' are used to hold instance specific state
like file descriptors or local data structures.
- 'next_bio' is used by filter BIOs to hold the pointer of the
next BIO in the chain. written data is sent to this BIO and
data read is taken from it.
- 'references' is used to indicate the number of pointers to
this structure. This needs to be '1' before a call to
BIO_free() is made if the BIO_free() function is to
actually free() the structure, otherwise the reference
count is just decreased. The actual BIO subsystem does
not really use this functionality but it is useful when
used in more advanced applicaion.
- num_read and num_write are the total number of bytes
read/written via the 'read()' and 'write()' methods.
BIO_ctrl operations.
The following is the list of standard commands passed as the
second parameter to BIO_ctrl() and should be supported by
all BIO as best as possible. Some are optional, some are
manditory, in any case, where is makes sense, a filter BIO
should pass such requests to underlying BIO's.
- BIO_CTRL_RESET - Reset the BIO back to an initial state.
- BIO_CTRL_EOF - return 0 if we are not at the end of input,
non 0 if we are.
- BIO_CTRL_INFO - BIO specific special command, normal
information return.
- BIO_CTRL_SET - set IO specific parameter.
- BIO_CTRL_GET - get IO specific parameter.
- BIO_CTRL_GET_CLOSE - Get the close on BIO_free() flag, one
of BIO_CLOSE or BIO_NOCLOSE.
- BIO_CTRL_SET_CLOSE - Set the close on BIO_free() flag.
- BIO_CTRL_PENDING - Return the number of bytes available
for instant reading
- BIO_CTRL_FLUSH - Output pending data, return number of bytes output.
- BIO_CTRL_SHOULD_RETRY - After an IO error (-1 returned)
should we 'retry' when IO is possible on the underlying IO object.
- BIO_CTRL_RETRY_TYPE - What kind of IO are we waiting on.
The following command is a special BIO_s_file() specific option.
- BIO_CTRL_SET_FILENAME - specify a file to open for IO.
The BIO_CTRL_RETRY_TYPE needs a little more explanation.
When performing non-blocking IO, or say reading on a memory
BIO, when no data is present (or cannot be written),
BIO_read() and/or BIO_write() will return -1.
BIO_should_retry(bio) will return true if this is due to an
IO condition rather than an actual error. In the case of
BIO_s_mem(), a read when there is no data will return -1 and
a should retry when there is more 'read' data.
The retry type is deduced from 2 macros
BIO_should_read(bio) and BIO_should_write(bio).
Now while it may appear obvious that a BIO_read() failure
should indicate that a retry should be performed when more
read data is available, this is often not true when using
things like an SSL BIO. During the SSL protocol startup
multiple reads and writes are performed, triggered by any
SSL_read or SSL_write.
So to write code that will transparently handle either a
socket or SSL BIO,
i=BIO_read(bio,..)
if (I == -1)
{
if (BIO_should_retry(bio))
{
if (BIO_should_read(bio))
{
/* call us again when BIO can be read */
}
if (BIO_should_write(bio))
{
/* call us again when BIO can be written */
}
}
}
At this point in time only read and write conditions can be
used but in the future I can see the situation for other
conditions, specifically with SSL there could be a condition
of a X509 certificate lookup taking place and so the non-
blocking BIO_read would require a retry when the certificate
lookup subsystem has finished it's lookup. This is all
makes more sense and is easy to use in a event loop type
setup.
When using the SSL BIO, either SSL_read() or SSL_write()s
can be called during the protocol startup and things will
still work correctly.
The nice aspect of the use of the BIO_should_retry() macro
is that all the errno codes that indicate a non-fatal error
are encapsulated in one place. The Windows specific error
codes and WSAGetLastError() calls are also hidden from the
application.
Notes on each BIO method.
Normally buffer.h is just required but depending on the
BIO_METHOD, ssl.h or evp.h will also be required.
BIO_METHOD *BIO_s_mem(void);
- BIO_set_mem_buf(BIO *bio, BUF_MEM *bm, int close_flag) -
set the underlying BUF_MEM structure for the BIO to use.
- BIO_get_mem_ptr(BIO *bio, char **pp) - if pp is not NULL,
set it to point to the memory array and return the number
of bytes available.
A read/write BIO. Any data written is appended to the
memory array and any read is read from the front. This BIO
can be used for read/write at the same time. BIO_gets() is
supported in the fgets() sense.
BIO_CTRL_INFO can be used to retrieve pointers to the memory
buffer and it's length.
BIO_METHOD *BIO_s_file(void);
- BIO_set_fp(BIO *bio, FILE *fp, int close_flag) - set 'FILE *' to use.
- BIO_get_fp(BIO *bio, FILE **fp) - get the 'FILE *' in use.
- BIO_read_filename(BIO *bio, char *name) - read from file.
- BIO_write_filename(BIO *bio, char *name) - write to file.
- BIO_append_filename(BIO *bio, char *name) - append to file.
This BIO sits over the normal system fread()/fgets() type
functions. Gets() is supported. This BIO in theory could be
used for read and write but it is best to think of each BIO
of this type as either a read or a write BIO, not both.
BIO_METHOD *BIO_s_socket(void);
BIO_METHOD *BIO_s_fd(void);
- BIO_sock_should_retry(int i) - the underlying function
used to determine if a call should be retried; the
argument is the '0' or '-1' returned by the previous BIO
operation.
- BIO_fd_should_retry(int i) - same as the
- BIO_sock_should_retry() except that it is different internally.
- BIO_set_fd(BIO *bio, int fd, int close_flag) - set the
file descriptor to use
- BIO_get_fd(BIO *bio, int *fd) - get the file descriptor.
These two methods are very similar. Gets() is not
supported, if you want this functionality, put a
BIO_f_buffer() onto it. This BIO is bi-directional if the
underlying file descriptor is. This is normally the case
for sockets but not the case for stdio descriptors.
BIO_METHOD *BIO_s_null(void);
Read and write as much data as you like, it all disappears
into this BIO.
BIO_METHOD *BIO_f_buffer(void);
- BIO_get_buffer_num_lines(BIO *bio) - return the number of
complete lines in the buffer.
- BIO_set_buffer_size(BIO *bio, long size) - set the size of
the buffers.
This type performs input and output buffering. It performs
both at the same time. The size of the buffer can be set
via the set buffer size option. Data buffered for output is
only written when the buffer fills.
BIO_METHOD *BIO_f_ssl(void);
- BIO_set_ssl(BIO *bio, SSL *ssl, int close_flag) - the SSL
structure to use.
- BIO_get_ssl(BIO *bio, SSL **ssl) - get the SSL structure
in use.
The SSL bio is a little different from normal BIOs because
the underlying SSL structure is a little different. A SSL
structure performs IO via a read and write BIO. These can
be different and are normally set via the
SSL_set_rbio()/SSL_set_wbio() calls. The SSL_set_fd() calls
are just wrappers that create socket BIOs and then call
SSL_set_bio() where the read and write BIOs are the same.
The BIO_push() operation makes the SSLs IO BIOs the same, so
make sure the BIO pushed is capable of two directional
traffic. If it is not, you will have to install the BIOs
via the more conventional SSL_set_bio() call. BIO_pop() will retrieve
the 'SSL read' BIO.
BIO_METHOD *BIO_f_md(void);
- BIO_set_md(BIO *bio, EVP_MD *md) - set the message digest
to use.
- BIO_get_md(BIO *bio, EVP_MD **mdp) - return the digest
method in use in mdp, return 0 if not set yet.
- BIO_reset() reinitializes the digest (EVP_DigestInit())
and passes the reset to the underlying BIOs.
All data read or written via BIO_read() or BIO_write() to
this BIO will be added to the calculated digest. This
implies that this BIO is only one directional. If read and
write operations are performed, two separate BIO_f_md() BIOs
are reuqired to generate digests on both the input and the
output. BIO_gets(BIO *bio, char *md, int size) will place the
generated digest into 'md' and return the number of bytes.
The EVP_MAX_MD_SIZE should probably be used to size the 'md'
array. Reading the digest will also reset it.
BIO_METHOD *BIO_f_cipher(void);
- BIO_reset() reinitializes the cipher.
- BIO_flush() should be called when the last bytes have been
output to flush the final block of block ciphers.
- BIO_get_cipher_status(BIO *b), when called after the last
read from a cipher BIO, returns non-zero if the data
decrypted correctly, otherwise, 0.
- BIO_set_cipher(BIO *b, EVP_CIPHER *c, unsigned char *key,
unsigned char *iv, int encrypt) This function is used to
setup a cipher BIO. The length of key and iv are
specified by the choice of EVP_CIPHER. Encrypt is 1 to
encrypt and 0 to decrypt.
BIO_METHOD *BIO_f_base64(void);
- BIO_flush() should be called when the last bytes have been output.
This BIO base64 encodes when writing and base64 decodes when
reading. It will scan the input until a suitable begin line
is found. After reading data, BIO_reset() will reset the
BIO to start scanning again. Do not mix reading and writing
on the same base64 BIO. It is meant as a single stream BIO.
Directions type
both BIO_s_mem()
one/both BIO_s_file()
both BIO_s_fd()
both BIO_s_socket()
both BIO_s_null()
both BIO_f_buffer()
one BIO_f_md()
one BIO_f_cipher()
one BIO_f_base64()
both BIO_f_ssl()
It is easy to mix one and two directional BIOs, all one has
to do is to keep two separate BIO pointers for reading and
writing and be careful about usage of underlying BIOs. The
SSL bio by it's very nature has to be two directional but
the BIO_push() command will push the one BIO into the SSL
BIO for both reading and writing.
The best example program to look at is apps/enc.c and/or perhaps apps/dgst.c.
/* crypto/bio/bio.h */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
#ifndef HEADER_BIO_H
#define HEADER_BIO_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdio.h>
#include <stdlib.h>
#include <openssl/crypto.h>
/* These are the 'types' of BIOs */
#define BIO_TYPE_NONE 0
#define BIO_TYPE_MEM (1|0x0400)
#define BIO_TYPE_FILE (2|0x0400)
#define BIO_TYPE_FD (4|0x0400|0x0100)
#define BIO_TYPE_SOCKET (5|0x0400|0x0100)
#define BIO_TYPE_NULL (6|0x0400)
#define BIO_TYPE_SSL (7|0x0200)
#define BIO_TYPE_MD (8|0x0200) /* pasive filter */
#define BIO_TYPE_BUFFER (9|0x0200) /* filter */
#define BIO_TYPE_CIPHER (10|0x0200) /* filter */
#define BIO_TYPE_BASE64 (11|0x0200) /* filter */
#define BIO_TYPE_CONNECT (12|0x0400|0x0100) /* socket - connect */
#define BIO_TYPE_ACCEPT (13|0x0400|0x0100) /* socket for accept */
#define BIO_TYPE_PROXY_CLIENT (14|0x0200) /* client proxy BIO */
#define BIO_TYPE_PROXY_SERVER (15|0x0200) /* server proxy BIO */
#define BIO_TYPE_NBIO_TEST (16|0x0200) /* server proxy BIO */
#define BIO_TYPE_NULL_FILTER (17|0x0200)
#define BIO_TYPE_BER (18|0x0200) /* BER -> bin filter */
#define BIO_TYPE_BIO (19|0x0400) /* (half a) BIO pair */
#define BIO_TYPE_DESCRIPTOR 0x0100 /* socket, fd, connect or accept */
#define BIO_TYPE_FILTER 0x0200
#define BIO_TYPE_SOURCE_SINK 0x0400
/* BIO_FILENAME_READ|BIO_CLOSE to open or close on free.
* BIO_set_fp(in,stdin,BIO_NOCLOSE); */
#define BIO_NOCLOSE 0x00
#define BIO_CLOSE 0x01
/* These are used in the following macros and are passed to
* BIO_ctrl() */
#define BIO_CTRL_RESET 1 /* opt - rewind/zero etc */
#define BIO_CTRL_EOF 2 /* opt - are we at the eof */
#define BIO_CTRL_INFO 3 /* opt - extra tit-bits */
#define BIO_CTRL_SET 4 /* man - set the 'IO' type */
#define BIO_CTRL_GET 5 /* man - get the 'IO' type */
#define BIO_CTRL_PUSH 6 /* opt - internal, used to signify change */
#define BIO_CTRL_POP 7 /* opt - internal, used to signify change */
#define BIO_CTRL_GET_CLOSE 8 /* man - set the 'close' on free */
#define BIO_CTRL_SET_CLOSE 9 /* man - set the 'close' on free */
#define BIO_CTRL_PENDING 10 /* opt - is their more data buffered */
#define BIO_CTRL_FLUSH 11 /* opt - 'flush' buffered output */
#define BIO_CTRL_DUP 12 /* man - extra stuff for 'duped' BIO */
#define BIO_CTRL_WPENDING 13 /* opt - number of bytes still to write */
/* callback is int cb(BIO *bio,state,ret); */
#define BIO_CTRL_SET_CALLBACK 14 /* opt - set callback function */
#define BIO_CTRL_GET_CALLBACK 15 /* opt - set callback function */
#define BIO_CTRL_SET_FILENAME 30 /* BIO_s_file special */
/* modifiers */
#define BIO_FP_READ 0x02
#define BIO_FP_WRITE 0x04
#define BIO_FP_APPEND 0x08
#define BIO_FP_TEXT 0x10
#define BIO_FLAGS_READ 0x01
#define BIO_FLAGS_WRITE 0x02
#define BIO_FLAGS_IO_SPECIAL 0x04
#define BIO_FLAGS_RWS (BIO_FLAGS_READ|BIO_FLAGS_WRITE|BIO_FLAGS_IO_SPECIAL)
#define BIO_FLAGS_SHOULD_RETRY 0x08
/* Used in BIO_gethostbyname() */
#define BIO_GHBN_CTRL_HITS 1
#define BIO_GHBN_CTRL_MISSES 2
#define BIO_GHBN_CTRL_CACHE_SIZE 3
#define BIO_GHBN_CTRL_GET_ENTRY 4
#define BIO_GHBN_CTRL_FLUSH 5
/* Mostly used in the SSL BIO */
/* Not used anymore
* #define BIO_FLAGS_PROTOCOL_DELAYED_READ 0x10
* #define BIO_FLAGS_PROTOCOL_DELAYED_WRITE 0x20
* #define BIO_FLAGS_PROTOCOL_STARTUP 0x40
*/
#define BIO_FLAGS_BASE64_NO_NL 0x100
/* This is used with memory BIOs: it means we shouldn't free up or change the
* data in any way.
*/
#define BIO_FLAGS_MEM_RDONLY 0x200
#define BIO_set_flags(b,f) ((b)->flags|=(f))
#define BIO_get_flags(b) ((b)->flags)
#define BIO_set_retry_special(b) \
((b)->flags|=(BIO_FLAGS_IO_SPECIAL|BIO_FLAGS_SHOULD_RETRY))
#define BIO_set_retry_read(b) \
((b)->flags|=(BIO_FLAGS_READ|BIO_FLAGS_SHOULD_RETRY))
#define BIO_set_retry_write(b) \
((b)->flags|=(BIO_FLAGS_WRITE|BIO_FLAGS_SHOULD_RETRY))
/* These are normally used internally in BIOs */
#define BIO_clear_flags(b,f) ((b)->flags&= ~(f))
#define BIO_clear_retry_flags(b) \
((b)->flags&= ~(BIO_FLAGS_RWS|BIO_FLAGS_SHOULD_RETRY))
#define BIO_get_retry_flags(b) \
((b)->flags&(BIO_FLAGS_RWS|BIO_FLAGS_SHOULD_RETRY))
/* These shouldbe used by the application to tell why we should retry */
#define BIO_should_read(a) ((a)->flags & BIO_FLAGS_READ)
#define BIO_should_write(a) ((a)->flags & BIO_FLAGS_WRITE)
#define BIO_should_io_special(a) ((a)->flags & BIO_FLAGS_IO_SPECIAL)
#define BIO_retry_type(a) ((a)->flags & BIO_FLAGS_RWS)
#define BIO_should_retry(a) ((a)->flags & BIO_FLAGS_SHOULD_RETRY)
/* The next two are used in conjunction with the
* BIO_should_io_special() condition. After this returns true,
* BIO *BIO_get_retry_BIO(BIO *bio, int *reason); will walk the BIO
* stack and return the 'reason' for the special and the offending BIO.
* Given a BIO, BIO_get_retry_reason(bio) will return the code. */
/* Returned from the SSL bio when the certificate retrieval code had an error */
#define BIO_RR_SSL_X509_LOOKUP 0x01
/* Returned from the connect BIO when a connect would have blocked */
#define BIO_RR_CONNECT 0x02
/* These are passed by the BIO callback */
#define BIO_CB_FREE 0x01
#define BIO_CB_READ 0x02
#define BIO_CB_WRITE 0x03
#define BIO_CB_PUTS 0x04
#define BIO_CB_GETS 0x05
#define BIO_CB_CTRL 0x06
/* The callback is called before and after the underling operation,
* The BIO_CB_RETURN flag indicates if it is after the call */
#define BIO_CB_RETURN 0x80
#define BIO_CB_return(a) ((a)|BIO_CB_RETURN))
#define BIO_cb_pre(a) (!((a)&BIO_CB_RETURN))
#define BIO_cb_post(a) ((a)&BIO_CB_RETURN)
#define BIO_set_callback(b,cb) ((b)->callback=(cb))
#define BIO_set_callback_arg(b,arg) ((b)->cb_arg=(char *)(arg))
#define BIO_get_callback_arg(b) ((b)->cb_arg)
#define BIO_get_callback(b) ((b)->callback)
#define BIO_method_name(b) ((b)->method->name)
#define BIO_method_type(b) ((b)->method->type)
#ifndef WIN16
typedef struct bio_method_st
{
int type;
const char *name;
int (*bwrite)();
int (*bread)();
int (*bputs)();
int (*bgets)();
long (*ctrl)();
int (*create)();
int (*destroy)();
} BIO_METHOD;
#else
typedef struct bio_method_st
{
int type;
const char *name;
int (_far *bwrite)();
int (_far *bread)();
int (_far *bputs)();
int (_far *bgets)();
long (_far *ctrl)();
int (_far *create)();
int (_far *destroy)();
} BIO_METHOD;
#endif
typedef struct bio_st
{
BIO_METHOD *method;
/* bio, mode, argp, argi, argl, ret */
long (*callback)(struct bio_st *,int,const char *,int, long,long);
char *cb_arg; /* first argument for the callback */
int init;
int shutdown;
int flags; /* extra storage */
int retry_reason;
int num;
void *ptr;
struct bio_st *next_bio; /* used by filter BIOs */
struct bio_st *prev_bio; /* used by filter BIOs */
int references;
unsigned long num_read;
unsigned long num_write;
CRYPTO_EX_DATA ex_data;
} BIO;
typedef struct bio_f_buffer_ctx_struct
{
/* BIO *bio; */ /* this is now in the BIO struct */
int ibuf_size; /* how big is the input buffer */
int obuf_size; /* how big is the output buffer */
char *ibuf; /* the char array */
int ibuf_len; /* how many bytes are in it */
int ibuf_off; /* write/read offset */
char *obuf; /* the char array */
int obuf_len; /* how many bytes are in it */
int obuf_off; /* write/read offset */
} BIO_F_BUFFER_CTX;
/* connect BIO stuff */
#define BIO_CONN_S_BEFORE 1
#define BIO_CONN_S_GET_IP 2
#define BIO_CONN_S_GET_PORT 3
#define BIO_CONN_S_CREATE_SOCKET 4
#define BIO_CONN_S_CONNECT 5
#define BIO_CONN_S_OK 6
#define BIO_CONN_S_BLOCKED_CONNECT 7
#define BIO_CONN_S_NBIO 8
/*#define BIO_CONN_get_param_hostname BIO_ctrl */
#define BIO_number_read(b) ((b)->num_read)
#define BIO_number_written(b) ((b)->num_write)
#define BIO_C_SET_CONNECT 100
#define BIO_C_DO_STATE_MACHINE 101
#define BIO_C_SET_NBIO 102
#define BIO_C_SET_PROXY_PARAM 103
#define BIO_C_SET_FD 104
#define BIO_C_GET_FD 105
#define BIO_C_SET_FILE_PTR 106
#define BIO_C_GET_FILE_PTR 107
#define BIO_C_SET_FILENAME 108
#define BIO_C_SET_SSL 109
#define BIO_C_GET_SSL 110
#define BIO_C_SET_MD 111
#define BIO_C_GET_MD 112
#define BIO_C_GET_CIPHER_STATUS 113
#define BIO_C_SET_BUF_MEM 114
#define BIO_C_GET_BUF_MEM_PTR 115
#define BIO_C_GET_BUFF_NUM_LINES 116
#define BIO_C_SET_BUFF_SIZE 117
#define BIO_C_SET_ACCEPT 118
#define BIO_C_SSL_MODE 119
#define BIO_C_GET_MD_CTX 120
#define BIO_C_GET_PROXY_PARAM 121
#define BIO_C_SET_BUFF_READ_DATA 122 /* data to read first */
#define BIO_C_GET_CONNECT 123
#define BIO_C_GET_ACCEPT 124
#define BIO_C_SET_SSL_RENEGOTIATE_BYTES 125
#define BIO_C_GET_SSL_NUM_RENEGOTIATES 126
#define BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT 127
#define BIO_C_FILE_SEEK 128
#define BIO_C_GET_CIPHER_CTX 129
#define BIO_C_SET_BUF_MEM_EOF_RETURN 130/*return end of input value*/
#define BIO_C_SET_BIND_MODE 131
#define BIO_C_GET_BIND_MODE 132
#define BIO_C_FILE_TELL 133
#define BIO_C_GET_SOCKS 134
#define BIO_C_SET_SOCKS 135
#define BIO_C_SET_WRITE_BUF_SIZE 136/* for BIO_s_bio */
#define BIO_C_GET_WRITE_BUF_SIZE 137
#define BIO_C_MAKE_BIO_PAIR 138
#define BIO_C_DESTROY_BIO_PAIR 139
#define BIO_C_GET_WRITE_GUARANTEE 140
#define BIO_C_GET_READ_REQUEST 141
#define BIO_C_SHUTDOWN_WR 142
#define BIO_C_NREAD0 143
#define BIO_C_NREAD 144
#define BIO_C_NWRITE0 145
#define BIO_C_NWRITE 146
#define BIO_C_RESET_READ_REQUEST 147
#define BIO_set_app_data(s,arg) BIO_set_ex_data(s,0,(char *)arg)
#define BIO_get_app_data(s) BIO_get_ex_data(s,0)
/* BIO_s_connect() and BIO_s_socks4a_connect() */
#define BIO_set_conn_hostname(b,name) BIO_ctrl(b,BIO_C_SET_CONNECT,0,(char *)name)
#define BIO_set_conn_port(b,port) BIO_ctrl(b,BIO_C_SET_CONNECT,1,(char *)port)
#define BIO_set_conn_ip(b,ip) BIO_ctrl(b,BIO_C_SET_CONNECT,2,(char *)ip)
#define BIO_set_conn_int_port(b,port) BIO_ctrl(b,BIO_C_SET_CONNECT,3,(char *)port)
#define BIO_get_conn_hostname(b) BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,0)
#define BIO_get_conn_port(b) BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,1)
#define BIO_get_conn_ip(b,ip) BIO_ptr_ctrl(b,BIO_C_SET_CONNECT,2)
#define BIO_get_conn_int_port(b,port) BIO_int_ctrl(b,BIO_C_SET_CONNECT,3,port)
#define BIO_set_nbio(b,n) BIO_ctrl(b,BIO_C_SET_NBIO,(n),NULL)
/* BIO_s_accept_socket() */
#define BIO_set_accept_port(b,name) BIO_ctrl(b,BIO_C_SET_ACCEPT,0,(char *)name)
#define BIO_get_accept_port(b) BIO_ptr_ctrl(b,BIO_C_GET_ACCEPT,0)
/* #define BIO_set_nbio(b,n) BIO_ctrl(b,BIO_C_SET_NBIO,(n),NULL) */
#define BIO_set_nbio_accept(b,n) BIO_ctrl(b,BIO_C_SET_ACCEPT,1,(n)?"a":NULL)
#define BIO_set_accept_bios(b,bio) BIO_ctrl(b,BIO_C_SET_ACCEPT,2,(char *)bio)
#define BIO_BIND_NORMAL 0
#define BIO_BIND_REUSEADDR_IF_UNUSED 1
#define BIO_BIND_REUSEADDR 2
#define BIO_set_bind_mode(b,mode) BIO_ctrl(b,BIO_C_SET_BIND_MODE,mode,NULL)
#define BIO_get_bind_mode(b,mode) BIO_ctrl(b,BIO_C_GET_BIND_MODE,0,NULL)
#define BIO_do_connect(b) BIO_do_handshake(b)
#define BIO_do_accept(b) BIO_do_handshake(b)
#define BIO_do_handshake(b) BIO_ctrl(b,BIO_C_DO_STATE_MACHINE,0,NULL)
/* BIO_s_proxy_client() */
#define BIO_set_url(b,url) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,0,(char *)(url))
#define BIO_set_proxies(b,p) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,1,(char *)(p))
/* BIO_set_nbio(b,n) */
#define BIO_set_filter_bio(b,s) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,2,(char *)(s))
/* BIO *BIO_get_filter_bio(BIO *bio); */
#define BIO_set_proxy_cb(b,cb) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,3,(char *)(cb))
#define BIO_set_proxy_header(b,sk) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,4,(char *)sk)
#define BIO_set_no_connect_return(b,bool) BIO_int_ctrl(b,BIO_C_SET_PROXY_PARAM,5,bool)
#define BIO_get_proxy_header(b,skp) BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,0,(char *)skp)
#define BIO_get_proxies(b,pxy_p) BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,1,(char *)(pxy_p))
#define BIO_get_url(b,url) BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,2,(char *)(url))
#define BIO_get_no_connect_return(b) BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,5,NULL)
#define BIO_set_fd(b,fd,c) BIO_int_ctrl(b,BIO_C_SET_FD,c,fd)
#define BIO_get_fd(b,c) BIO_ctrl(b,BIO_C_GET_FD,0,(char *)c)
#define BIO_set_fp(b,fp,c) BIO_ctrl(b,BIO_C_SET_FILE_PTR,c,(char *)fp)
#define BIO_get_fp(b,fpp) BIO_ctrl(b,BIO_C_GET_FILE_PTR,0,(char *)fpp)
#define BIO_seek(b,ofs) (int)BIO_ctrl(b,BIO_C_FILE_SEEK,ofs,NULL)
#define BIO_tell(b) (int)BIO_ctrl(b,BIO_C_FILE_TELL,0,NULL)
/* name is cast to lose const, but might be better to route through a function
so we can do it safely */
#ifdef CONST_STRICT
/* If you are wondering why this isn't defined, its because CONST_STRICT is
* purely a compile-time kludge to allow const to be checked.
*/
int BIO_read_filename(BIO *b,const char *name);
#else
#define BIO_read_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
BIO_CLOSE|BIO_FP_READ,(char *)name)
#endif
#define BIO_write_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
BIO_CLOSE|BIO_FP_WRITE,name)
#define BIO_append_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
BIO_CLOSE|BIO_FP_APPEND,name)
#define BIO_rw_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
BIO_CLOSE|BIO_FP_READ|BIO_FP_WRITE,name)
/* WARNING WARNING, this ups the reference count on the read bio of the
* SSL structure. This is because the ssl read BIO is now pointed to by
* the next_bio field in the bio. So when you free the BIO, make sure
* you are doing a BIO_free_all() to catch the underlying BIO. */
#define BIO_set_ssl(b,ssl,c) BIO_ctrl(b,BIO_C_SET_SSL,c,(char *)ssl)
#define BIO_get_ssl(b,sslp) BIO_ctrl(b,BIO_C_GET_SSL,0,(char *)sslp)
#define BIO_set_ssl_mode(b,client) BIO_ctrl(b,BIO_C_SSL_MODE,client,NULL)
#define BIO_set_ssl_renegotiate_bytes(b,num) \
BIO_ctrl(b,BIO_C_SET_SSL_RENEGOTIATE_BYTES,num,NULL);
#define BIO_get_num_renegotiates(b) \
BIO_ctrl(b,BIO_C_SET_SSL_NUM_RENEGOTIATES,0,NULL);
#define BIO_set_ssl_renegotiate_timeout(b,seconds) \
BIO_ctrl(b,BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT,seconds,NULL);
/* defined in evp.h */
/* #define BIO_set_md(b,md) BIO_ctrl(b,BIO_C_SET_MD,1,(char *)md) */
#define BIO_get_mem_data(b,pp) BIO_ctrl(b,BIO_CTRL_INFO,0,(char *)pp)
#define BIO_set_mem_buf(b,bm,c) BIO_ctrl(b,BIO_C_SET_BUF_MEM,c,(char *)bm)
#define BIO_get_mem_ptr(b,pp) BIO_ctrl(b,BIO_C_GET_BUF_MEM_PTR,0,(char *)pp)
#define BIO_set_mem_eof_return(b,v) \
BIO_ctrl(b,BIO_C_SET_BUF_MEM_EOF_RETURN,v,NULL)
/* For the BIO_f_buffer() type */
#define BIO_get_buffer_num_lines(b) BIO_ctrl(b,BIO_C_GET_BUFF_NUM_LINES,0,NULL)
#define BIO_set_buffer_size(b,size) BIO_ctrl(b,BIO_C_SET_BUFF_SIZE,size,NULL)
#define BIO_set_read_buffer_size(b,size) BIO_int_ctrl(b,BIO_C_SET_BUFF_SIZE,size,0)
#define BIO_set_write_buffer_size(b,size) BIO_int_ctrl(b,BIO_C_SET_BUFF_SIZE,size,1)
#define BIO_set_buffer_read_data(b,buf,num) BIO_ctrl(b,BIO_C_SET_BUFF_READ_DATA,num,buf)
/* Don't use the next one unless you know what you are doing :-) */
#define BIO_dup_state(b,ret) BIO_ctrl(b,BIO_CTRL_DUP,0,(char *)(ret))
#define BIO_reset(b) (int)BIO_ctrl(b,BIO_CTRL_RESET,0,NULL)
#define BIO_eof(b) (int)BIO_ctrl(b,BIO_CTRL_EOF,0,NULL)
#define BIO_set_close(b,c) (int)BIO_ctrl(b,BIO_CTRL_SET_CLOSE,(c),NULL)
#define BIO_get_close(b) (int)BIO_ctrl(b,BIO_CTRL_GET_CLOSE,0,NULL)
#define BIO_pending(b) (int)BIO_ctrl(b,BIO_CTRL_PENDING,0,NULL)
#define BIO_wpending(b) (int)BIO_ctrl(b,BIO_CTRL_WPENDING,0,NULL)
/* ...pending macros have inappropriate return type */
size_t BIO_ctrl_pending(BIO *b);
size_t BIO_ctrl_wpending(BIO *b);
#define BIO_flush(b) (int)BIO_ctrl(b,BIO_CTRL_FLUSH,0,NULL)
#define BIO_get_info_callback(b,cbp) (int)BIO_ctrl(b,BIO_CTRL_GET_CALLBACK,0,(char *)cbp)
#define BIO_set_info_callback(b,cb) (int)BIO_ctrl(b,BIO_CTRL_SET_CALLBACK,0,(char *)cb)
/* For the BIO_f_buffer() type */
#define BIO_buffer_get_num_lines(b) BIO_ctrl(b,BIO_CTRL_GET,0,NULL)
/* For BIO_s_bio() */
#define BIO_set_write_buf_size(b,size) (int)BIO_ctrl(b,BIO_C_SET_WRITE_BUF_SIZE,size,NULL)
#define BIO_get_write_buf_size(b,size) (size_t)BIO_ctrl(b,BIO_C_GET_WRITE_BUF_SIZE,size,NULL)
#define BIO_make_bio_pair(b1,b2) (int)BIO_ctrl(b1,BIO_C_MAKE_BIO_PAIR,0,b2)
#define BIO_destroy_bio_pair(b) (int)BIO_ctrl(b,BIO_C_DESTROY_BIO_PAIR,0,NULL)
/* macros with inappropriate type -- but ...pending macros use int too: */
#define BIO_get_write_guarantee(b) (int)BIO_ctrl(b,BIO_C_GET_WRITE_GUARANTEE,0,NULL)
#define BIO_get_read_request(b) (int)BIO_ctrl(b,BIO_C_GET_READ_REQUEST,0,NULL)
size_t BIO_ctrl_get_write_guarantee(BIO *b);
size_t BIO_ctrl_get_read_request(BIO *b);
int BIO_ctrl_reset_read_request(BIO *b);
#ifdef NO_STDIO
#define NO_FP_API
#endif
/* These two aren't currently implemented */
/* int BIO_get_ex_num(BIO *bio); */
/* void BIO_set_ex_free_func(BIO *bio,int idx,void (*cb)()); */
int BIO_set_ex_data(BIO *bio,int idx,char *data);
char *BIO_get_ex_data(BIO *bio,int idx);
int BIO_get_ex_new_index(long argl, char *argp, int (*new_func)(),
int (*dup_func)(), void (*free_func)());
# if defined(WIN16) && defined(_WINDLL)
BIO_METHOD *BIO_s_file_internal(void);
BIO *BIO_new_file_internal(char *filename, char *mode);
BIO *BIO_new_fp_internal(FILE *stream, int close_flag);
# define BIO_s_file BIO_s_file_internal
# define BIO_new_file BIO_new_file_internal
# define BIO_new_fp BIO_new_fp_internal
# else /* FP_API */
BIO_METHOD *BIO_s_file(void );
BIO *BIO_new_file(const char *filename, const char *mode);
BIO *BIO_new_fp(FILE *stream, int close_flag);
# define BIO_s_file_internal BIO_s_file
# define BIO_new_file_internal BIO_new_file
# define BIO_new_fp_internal BIO_s_file
# endif /* FP_API */
BIO * BIO_new(BIO_METHOD *type);
int BIO_set(BIO *a,BIO_METHOD *type);
int BIO_free(BIO *a);
int BIO_read(BIO *b, void *data, int len);
int BIO_gets(BIO *bp,char *buf, int size);
int BIO_write(BIO *b, const char *data, int len);
int BIO_puts(BIO *bp,const char *buf);
long BIO_ctrl(BIO *bp,int cmd,long larg,void *parg);
char * BIO_ptr_ctrl(BIO *bp,int cmd,long larg);
long BIO_int_ctrl(BIO *bp,int cmd,long larg,int iarg);
BIO * BIO_push(BIO *b,BIO *append);
BIO * BIO_pop(BIO *b);
void BIO_free_all(BIO *a);
BIO * BIO_find_type(BIO *b,int bio_type);
BIO * BIO_get_retry_BIO(BIO *bio, int *reason);
int BIO_get_retry_reason(BIO *bio);
BIO * BIO_dup_chain(BIO *in);
int BIO_nread0(BIO *bio, char **buf);
int BIO_nread(BIO *bio, char **buf, int num);
int BIO_nwrite0(BIO *bio, char **buf);
int BIO_nwrite(BIO *bio, char **buf, int num);
#ifndef WIN16
long BIO_debug_callback(BIO *bio,int cmd,const char *argp,int argi,
long argl,long ret);
#else
long _far _loadds BIO_debug_callback(BIO *bio,int cmd,const char *argp,int argi,
long argl,long ret);
#endif
BIO_METHOD *BIO_s_mem(void);
BIO *BIO_new_mem_buf(void *buf, int len);
BIO_METHOD *BIO_s_socket(void);
BIO_METHOD *BIO_s_connect(void);
BIO_METHOD *BIO_s_accept(void);
BIO_METHOD *BIO_s_fd(void);
BIO_METHOD *BIO_s_log(void);
BIO_METHOD *BIO_s_bio(void);
BIO_METHOD *BIO_s_null(void);
BIO_METHOD *BIO_f_null(void);
BIO_METHOD *BIO_f_buffer(void);
BIO_METHOD *BIO_f_nbio_test(void);
/* BIO_METHOD *BIO_f_ber(void); */
int BIO_sock_should_retry(int i);
int BIO_sock_non_fatal_error(int error);
int BIO_fd_should_retry(int i);
int BIO_fd_non_fatal_error(int error);
int BIO_dump(BIO *b,const char *bytes,int len);
struct hostent *BIO_gethostbyname(const char *name);
/* We might want a thread-safe interface too:
* struct hostent *BIO_gethostbyname_r(const char *name,
* struct hostent *result, void *buffer, size_t buflen);
* or something similar (caller allocates a struct hostent,
* pointed to by "result", and additional buffer space for the various
* substructures; if the buffer does not suffice, NULL is returned
* and an appropriate error code is set).
*/
int BIO_sock_error(int sock);
int BIO_socket_ioctl(int fd, long type, unsigned long *arg);
int BIO_socket_nbio(int fd,int mode);
int BIO_get_port(const char *str, unsigned short *port_ptr);
int BIO_get_host_ip(const char *str, unsigned char *ip);
int BIO_get_accept_socket(char *host_port,int mode);
int BIO_accept(int sock,char **ip_port);
int BIO_sock_init(void );
void BIO_sock_cleanup(void);
int BIO_set_tcp_ndelay(int sock,int turn_on);
void ERR_load_BIO_strings(void );
BIO *BIO_new_socket(int sock, int close_flag);
BIO *BIO_new_fd(int fd, int close_flag);
BIO *BIO_new_connect(char *host_port);
BIO *BIO_new_accept(char *host_port);
int BIO_new_bio_pair(BIO **bio1, size_t writebuf1,
BIO **bio2, size_t writebuf2);
/* If successful, returns 1 and in *bio1, *bio2 two BIO pair endpoints.
* Otherwise returns 0 and sets *bio1 and *bio2 to NULL.
* Size 0 uses default value.
*/
void BIO_copy_next_retry(BIO *b);
long BIO_ghbn_ctrl(int cmd,int iarg,char *parg);
int BIO_printf(BIO *bio, ...);
/* BEGIN ERROR CODES */
/* The following lines are auto generated by the script mkerr.pl. Any changes
* made after this point may be overwritten when the script is next run.
*/
/* Error codes for the BIO functions. */
/* Function codes. */
#define BIO_F_ACPT_STATE 100
#define BIO_F_BIO_ACCEPT 101
#define BIO_F_BIO_BER_GET_HEADER 102
#define BIO_F_BIO_CTRL 103
#define BIO_F_BIO_GETHOSTBYNAME 120
#define BIO_F_BIO_GETS 104
#define BIO_F_BIO_GET_ACCEPT_SOCKET 105
#define BIO_F_BIO_GET_HOST_IP 106
#define BIO_F_BIO_GET_PORT 107
#define BIO_F_BIO_MAKE_PAIR 121
#define BIO_F_BIO_NEW 108
#define BIO_F_BIO_NEW_FILE 109
#define BIO_F_BIO_NEW_MEM_BUF 126
#define BIO_F_BIO_NREAD 123
#define BIO_F_BIO_NREAD0 124
#define BIO_F_BIO_NWRITE 125
#define BIO_F_BIO_NWRITE0 122
#define BIO_F_BIO_PUTS 110
#define BIO_F_BIO_READ 111
#define BIO_F_BIO_SOCK_INIT 112
#define BIO_F_BIO_WRITE 113
#define BIO_F_BUFFER_CTRL 114
#define BIO_F_CONN_STATE 115
#define BIO_F_FILE_CTRL 116
#define BIO_F_MEM_WRITE 117
#define BIO_F_SSL_NEW 118
#define BIO_F_WSASTARTUP 119
/* Reason codes. */
#define BIO_R_ACCEPT_ERROR 100
#define BIO_R_BAD_FOPEN_MODE 101
#define BIO_R_BAD_HOSTNAME_LOOKUP 102
#define BIO_R_BROKEN_PIPE 124
#define BIO_R_CONNECT_ERROR 103
#define BIO_R_ERROR_SETTING_NBIO 104
#define BIO_R_ERROR_SETTING_NBIO_ON_ACCEPTED_SOCKET 105
#define BIO_R_ERROR_SETTING_NBIO_ON_ACCEPT_SOCKET 106
#define BIO_R_GETHOSTBYNAME_ADDR_IS_NOT_AF_INET 107
#define BIO_R_INVALID_ARGUMENT 125
#define BIO_R_INVALID_IP_ADDRESS 108
#define BIO_R_IN_USE 123
#define BIO_R_KEEPALIVE 109
#define BIO_R_NBIO_CONNECT_ERROR 110
#define BIO_R_NO_ACCEPT_PORT_SPECIFIED 111
#define BIO_R_NO_HOSTNAME_SPECIFIED 112
#define BIO_R_NO_PORT_DEFINED 113
#define BIO_R_NO_PORT_SPECIFIED 114
#define BIO_R_NULL_PARAMETER 115
#define BIO_R_TAG_MISMATCH 116
#define BIO_R_UNABLE_TO_BIND_SOCKET 117
#define BIO_R_UNABLE_TO_CREATE_SOCKET 118
#define BIO_R_UNABLE_TO_LISTEN_SOCKET 119
#define BIO_R_UNINITIALIZED 120
#define BIO_R_UNSUPPORTED_METHOD 121
#define BIO_R_WRITE_TO_READ_ONLY_BIO 126
#define BIO_R_WSASTARTUP 122
#ifdef __cplusplus
}
#endif
#endif
