ossp-pkg/fsl/Makefile.in
1.19
##
## OSSP fsl - Faking/Flexible Syslog Library
## Copyright (c) 2002-2005 Ralf S. Engelschall <rse@engelschall.com>
## Copyright (c) 2002-2005 The OSSP Project <http://www.ossp.org/>
## Copyright (c) 2002-2005 Cable & Wireless <http://www.cw.com/>
##
## This file is part of OSSP fsl, a syslog(3) API faking library which
## can be found at http://www.ossp.org/pkg/lib/fsl/.
##
## Permission to use, copy, modify, and distribute this software for
## any purpose with or without fee is hereby granted, provided that
## the above copyright notice and this permission notice appear in all
## copies.
##
## THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
## WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
## IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
## CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
## USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
## ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
## OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
## OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
## SUCH DAMAGE.
##
## Makefile.in: make(1) build procedure
##
@SET_MAKE@
DESTDIR =
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@
includedir = @includedir@
mandir = @mandir@
CC = @CC@
CPPFLAGS = @CPPFLAGS@
CFLAGS = @DEFS@ @CFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
RM = rm -f
RMDIR = rmdir
SHTOOL = ./shtool
LIBTOOL = ./libtool
TRUE = true
POD2MAN = pod2man
LIB_NAME = libfsl.la
LIB_OBJS = fsl.lo fsl_version.lo
LIB_DEPS = @LIB_DEPS@
MAN_NAME = fsl.3
TST_NAME = fsl_test
TST_OBJS = fsl_test.o
FSL_CFGDIR = @FSL_CFGDIR@
FSL_PREFIX = @FSL_PREFIX@
FSL_DEBUGLOGCODE = @FSL_DEBUGLOGCODE@
FSL_DEBUGLOGFILE = @FSL_DEBUGLOGFILE@
FSL_DEBUGLOGMASK = @FSL_DEBUGLOGMASK@
FSL_DEBUGLOGSTOP = @FSL_DEBUGLOGSTOP@
SUBDIRS = @SUBDIR_L2@ @SUBDIR_CFG@ @SUBDIR_PCRE@
.SUFFIXES:
.SUFFIXES: .c .o .lo
all: _SUBDIRS_all $(LIB_NAME) $(TST_NAME) $(MAN_NAME)
.c.o:
$(CC) $(CPPFLAGS) $(CFLAGS) -c $<
.c.lo:
@$(LIBTOOL) --mode=compile $(CC) $(CPPFLAGS) $(CFLAGS) -c $<
# convenience rule for calling _SUBDIRS with various make targets
_SUBDIRS_all _SUBDIRS_check _SUBDIRS_install _SUBDIRS_uninstall _SUBDIRS_clean \
_SUBDIRS_distclean _SUBDIRS_realclean _SUBDIRS_depend:
@$(MAKE) $(MFLAGS) \
_SUBDIRS_TARGET=`echo $@ | sed -e 's/^_SUBDIRS_//'` \
_SUBDIRS_STEPDOWN
# the work horse rule which steps down to the subdirs in a loop
_SUBDIRS_STEPDOWN:
@for subdir in $(SUBDIRS); do \
test ! -f "$$subdir/Makefile" && continue; \
echo "===> $(_SUBDIRS_DP)$$subdir ($(_SUBDIRS_TARGET))"; \
(cd $$subdir; \
$(MAKE) $(MFLAGS) \
_SUBDIRS_DP="$(_SUBDIRS_DP)$$subdir/" \
$(_SUBDIRS_TARGET) || exit 1) || exit 1; \
echo "<=== $(_SUBDIRS_DP)$$subdir"; \
done
$(LIB_NAME): $(LIB_OBJS)
@$(LIBTOOL) --mode=link $(CC) $(LDFLAGS) -o $(LIB_NAME) $(LIB_OBJS) $(LIB_DEPS) -rpath $(libdir) \
-version-info `$(SHTOOL) version -lc -dlibtool fsl_version.c` $(LIBS)
$(TST_NAME): $(TST_OBJS) $(LIB_NAME)
@$(LIBTOOL) --mode=link $(CC) $(LDFLAGS) -o $(TST_NAME) $(TST_OBJS) $(LIB_NAME) $(LIBS)
man: $(MAN_NAME)
$(MAN_NAME): fsl.pod fsl_version.c
VS=`$(SHTOOL) version -lc -dshort fsl_version.c`; \
VL=`$(SHTOOL) version -lc -dlong fsl_version.c`; \
D=`$(SHTOOL) version -lc -dlong fsl_version.c | sed -e 's;.*(;;' -e 's;).*;;'`; \
$(POD2MAN) --quotes=none \
--section=3 --center="Faking/Flexible Syslog Library" \
--release="$$D" --date="OSSP fsl $$VS" fsl.pod | \
sed -e "s;FSL_VERSION_STR;$$VL;" \
-e "s;\@FSL_CFGDIR\@;$(FSL_CFGDIR);g" \
-e "s;\@FSL_PREFIX\@;$(FSL_PREFIX);g" \
-e "s;\@FSL_DEBUGLOGCODE\@;$(FSL_DEBUGLOGCODE);g" \
-e "s;\@FSL_DEBUGLOGFILE\@;$(FSL_DEBUGLOGFILE);g" \
-e "s;\@FSL_DEBUGLOGMASK\@;$(FSL_DEBUGLOGMASK);g" \
-e "s;\@FSL_DEBUGLOGSTOP\@;$(FSL_DEBUGLOGSTOP);g" \
>fsl.3
test: check
check: $(TST_NAME)
@[ -f fsl_test.syslog ] && $(RM) fsl_test.syslog || true
@$(LIBTOOL) --mode=execute ./$(TST_NAME)
@echo "fsl_test.syslog:"; if [ -s fsl_test.syslog ]; then cat fsl_test.syslog; else echo " ***EMPTY***"; fi
@echo "this test requires manual configuration, use fsl_test.cfg as template and see pathes below"
@strings <$(TST_NAME) | grep '@(#)'
install: all
$(SHTOOL) mkdir -f -p -m 755 $(DESTDIR)$(prefix)
$(SHTOOL) mkdir -f -p -m 755 $(DESTDIR)$(bindir)
$(SHTOOL) mkdir -f -p -m 755 $(DESTDIR)$(libdir)
$(SHTOOL) mkdir -f -p -m 755 $(DESTDIR)$(mandir)/man3
$(SHTOOL) install -c -m 755 fsl-config $(DESTDIR)$(bindir)/
$(SHTOOL) install -c -m 644 fsl.3 $(DESTDIR)$(mandir)/man3/
@$(LIBTOOL) --mode=install $(SHTOOL) install -c -m 644 libfsl.la $(DESTDIR)$(libdir)/
uninstall:
@$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)$(libdir)/libfsl.la
-$(RM) $(DESTDIR)$(mandir)/man3/fsl.3
-$(RM) $(DESTDIR)$(bindir)/fsl-config
-$(RMDIR) $(DESTDIR)$(mandir)/man3 >/dev/null 2>&1 || $(TRUE)
-$(RMDIR) $(DESTDIR)$(mandir) >/dev/null 2>&1 || $(TRUE)
-$(RMDIR) $(DESTDIR)$(libdir) >/dev/null 2>&1 || $(TRUE)
-$(RMDIR) $(DESTDIR)$(bindir) >/dev/null 2>&1 || $(TRUE)
-$(RMDIR) $(DESTDIR)$(prefix) >/dev/null 2>&1 || $(TRUE)
clean:
@$(MAKE) $(MFLAGS) _SUBDIRS_clean
-$(RM) $(LIB_NAME) $(LIB_OBJS)
-$(RM) $(TST_NAME) $(TST_OBJS)
-$(RM) fsl_test.debug fsl_test.syslog >/dev/null 2>&1 || $(TRUE)
-$(RM) -r .libs >/dev/null 2>&1 || $(TRUE)
-$(RM) *.o *.lo
distclean:
@$(MAKE) $(MFLAGS) _SUBDIRS_distclean
@$(MAKE) $(MFLAGS) clean
-$(RM) config.log config.status config.cache
-$(RM) Makefile config.h sa-config
-$(RM) libtool
realclean:
@$(MAKE) $(MFLAGS) _SUBDIRS_realclean
@$(MAKE) $(MFLAGS) distclean
-$(RM) fsl.3
-$(RM) configure config.h.in
-$(RM) shtool
-$(RM) ltmain.sh libtool.m4 config.guess config.sub
