ossp-pkg/xds/Makefile.in
##
## OSSP xds - Extensible Data Serialization
## Copyright (c) 2001-2005 Ralf S. Engelschall <rse@engelschall.com>
## Copyright (c) 2001-2005 The OSSP Project <http://www.ossp.org/>
## Copyright (c) 2001-2005 Cable & Wireless <http://www.cw.com/>
##
## This file is part of OSSP xds, an extensible data serialization
## library which can be found at http://www.ossp.org/pkg/lib/xds/.
##
## Permission to use, copy, modify, and distribute this software for
## any purpose with or without fee is hereby granted, provided that
## the above copyright notice and this permission notice appear in all
## copies.
##
## THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
## WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
## IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
## CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
## USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
## ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
## OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
## OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
## SUCH DAMAGE.
##
## Makefile.in: make(1) build procedure
##
@SET_MAKE@
# installation paths
DESTDIR =
TOP = .
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@
includedir = @includedir@
mandir = @mandir@
# build tools
CC = @CC@
LIBTOOL = ./libtool
SHTOOL = ./shtool
CPPFLAGS = @CPPFLAGS@ @DEFS@
CFLAGS = @CFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @xdr_lib@ @LIBS@
POD2MAN = @POD2MAN@
RM = rm -f
RMDIR = rmdir
# list of objects
LIB_NAME = libxds.la
LIB_OBJS = xds.lo xds_engine_xdr.lo xds_engine_xml.lo
TST_SRCS = xds_test_lib.c xds_test_xdr.c xds_test_xml.c
# file containing the official version information
_VERSION_FILE = \
xds_version.c
# helper macro for updating version information
_VERSION = \
$(SHTOOL) version -lc -nXDS -pxds_ $$OPT $(_VERSION_FILE);\
V=`$(SHTOOL) version -lc -dlong $(_VERSION_FILE)`;\
sed -e "s/Version .*(.*)/Version $$V/g" <README >README.n && mv README.n README
# helper macro for generating a Unix manual page
_MANPAGE = \
V1=`$(SHTOOL) version -lc -dshort $(_VERSION_FILE)`; \
V2=`$(SHTOOL) version -lc -dlong $(_VERSION_FILE)`; \
D=`$(SHTOOL) version -lc -dlong $(_VERSION_FILE) |\
sed -e 's;.*(;;' -e 's;).*;;'`; \
$(POD2MAN) --section=$${SEC} --center="$${ONELINE}" \
--release="$$D" --date="$${NAME} $$V1" $(S)$${BASENAME}.pod |\
sed -e "s;XDS_VERSION_STR;$$V2;" >$${BASENAME}.$${SEC}
.SUFFIXES:
.SUFFIXES: .c .lo
.PHONY: clean distclean realclean check
.c.lo:
$(LIBTOOL) --mode=compile --quiet $(CC) -c $(CPPFLAGS) $(CFLAGS) $<
all: $(LIB_NAME) xds.3 xds-config.1
$(LIB_NAME): $(LIB_OBJS)
$(LIBTOOL) --mode=link --quiet $(CC) -o $(LIB_NAME) $(LIB_OBJS) -rpath $(libdir) \
-version-info `$(SHTOOL) version -l c -d libtool xds_version.c`
clean:
-$(RM) $(LIB_NAME)
-$(RM) *.lo *.o
-$(RM) ./.*.t ./.*.l
-$(RM) xds.3
-$(RM) xds-config.1
-$(RM) xds-config
distclean: clean
-$(RM) config.log config.status Makefile libtool config.h
-$(RM) -r .libs >/dev/null 2>&1 || true
-$(RM) xds.h
realclean: distclean
-$(RM) config.guess config.sub ltmain.sh libtool.m4
-$(RM) configure config.h.in
-$(RM) shtool
check: $(LIB_NAME) $(TST_SRCS)
-@for filename in $(TST_SRCS); do \
for testname in `grep "#ifdef XDS_TEST_" $$filename | sed -e 's;^#ifdef ;;'`; do \
filebase=`echo $$filename | sed -e 's;\.c;;'`; \
testbase=`echo $$testname | sed -e 's;^XDS_TEST_;;'`; \
if [ ! -f ".$$testbase.t" ]; then \
echo "$(LIBTOOL) --mode=link --quiet $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -D$$testname -o .$$testbase.t $$filebase.c $(LIB_NAME) $(LIBS)"; \
$(LIBTOOL) --mode=link --quiet $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -D$$testname -o .$$testbase.t $$filebase.c $(LIB_NAME) $(LIBS); \
fi; \
done; \
done; \
sh ./xds_test.sh "$(LIBTOOL) --mode=execute" ./.*.t
# build Unix manual pages
xds-config.1: xds-config.pod $(_VERSION_FILE)
BASENAME="xds-config"; SEC=1; \
NAME="XDS"; ONELINE="Extensible Data Serialization"; \
$(_MANPAGE)
xds.3: xds.pod $(_VERSION_FILE)
BASENAME="xds"; SEC=3; \
NAME="XDS"; ONELINE="Extensible Data Serialization"; \
$(_MANPAGE)
# build GNU style ChangeLog
ChangeLog::
cvs2cl --revisions --branches --tags --no-wrap --separate-header --gmt
-$(RM) ChangeLog.bak
# perform standard installation procedure
install: all
$(SHTOOL) mkdir -p -f -m 755 $(DESTDIR)$(bindir)
$(SHTOOL) mkdir -p -f -m 755 $(DESTDIR)$(includedir)
$(SHTOOL) mkdir -p -f -m 755 $(DESTDIR)$(libdir)
$(SHTOOL) mkdir -p -f -m 755 $(DESTDIR)$(mandir)/man1
$(SHTOOL) mkdir -p -f -m 755 $(DESTDIR)$(mandir)/man3
$(SHTOOL) install -c -m 755 xds-config $(DESTDIR)$(bindir)/xds-config
$(SHTOOL) install -c -m 644 xds-config.1 $(DESTDIR)$(mandir)/man1/xds-config.1
$(SHTOOL) install -c -m 644 xds.3 $(DESTDIR)$(mandir)/man3/xds.3
$(SHTOOL) install -c -m 644 xds.h $(DESTDIR)$(includedir)/xds.h
@$(LIBTOOL) --mode=install $(SHTOOL) install -c -m 644 \
libxds.la $(DESTDIR)$(libdir)/libxds.la
# perform standard uninstallation procedure
uninstall:
-@$(LIBTOOL) --mode=uninstall $(RM) $(DESTDIR)$(libdir)/libxds.la
-$(RM) $(DESTDIR)$(includedir)/xds.h
-$(RM) $(DESTDIR)$(mandir)/man3/xds.3
-$(RM) $(DESTDIR)$(mandir)/man1/xds-config.1
-$(RM) $(DESTDIR)$(bindir)/xds-config
-$(RMDIR) $(DESTDIR)$(mandir)/man3
-$(RMDIR) $(DESTDIR)$(mandir)/man1
-$(RMDIR) $(DESTDIR)$(mandir)
-$(RMDIR) $(DESTDIR)$(libdir)
-$(RMDIR) $(DESTDIR)$(includedir)
-$(RMDIR) $(DESTDIR)$(bindir)
# Dependencies
$(LIB_OBJS): xds_p.h xds.h
