ossp-pkg/str/str.pod
##
## OSSP str - String Handling
## Copyright (c) 1999-2005 Ralf S. Engelschall <rse@engelschall.com>
## Copyright (c) 1999-2005 The OSSP Project <http://www.ossp.org/>
##
## This file is part of OSSP str, a string handling and manipulation
## library which can be found at http://www.ossp.org/pkg/lib/str/.
##
## Permission to use, copy, modify, and distribute this software for
## any purpose with or without fee is hereby granted, provided that
## the above copyright notice and this permission notice appear in all
## copies.
##
## THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
## WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
## IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
## CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
## LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
## USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
## ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
## OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
## OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
## SUCH DAMAGE.
##
## str.pod: Unix manual page
##
# Parts of this manual page (the str_format description) is:
#
# Copyright (c) 1990, 1991, 1993
# The Regents of the University of California. All rights reserved.
#
# This code is derived from software contributed to Berkeley by
# Chris Torek and the American National Standards Committee X3,
# on Information Processing Systems.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
# must display the following acknowledgement:
# This product includes software developed by the University of
# California, Berkeley and its contributors.
# 4. Neither the name of the University nor the names of its contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
=pod
=head1 NAME
B<OSSP str> - String Handling
=head1 VERSION
OSSP str STR_VERSION_STR
=head1 SYNOPSIS
B<str_len>,
B<str_copy>,
B<str_dup>,
B<str_concat>,
B<str_splice>,
B<str_compare>,
B<str_span>,
B<str_locate>,
B<str_token>,
B<str_parse>,
B<str_format>,
B<str_hash>,
B<str_base64>.
=head1 DESCRIPTION
B<OSSP str> is a generic string library written in ISO-C which
provides functions for handling, matching, parsing, searching and
formatting of ISO-C strings. So it can be considered as a superset of POSIX
string(3), but its main intention is to provide a more convenient and
compact API plus a more generalized functionality.
=head1 FUNCTIONS
The following functions are provided by the B<OSSP str> API:
=over 4
=item str_size_t B<str_len>(const char *I<s>);
This function determines the length of string I<s>, i.e., the number
of characters starting at I<s> that precede the terminating C<NUL>
character. It returns C<NULL> if I<s> is C<NULL>.
=item char *B<str_copy>(char *I<s>, const char *I<t>, size_t I<n>);
This copies the characters in string I<t> into the string I<s>, but never more
than I<n> characters (if I<n> is greater than C<0>). The two involved strings
can overlap and the characters in I<s> are always C<NUL>-terminated. The
string I<s> has to be large enough to hold all characters to be copied.
function returns C<NULL> if I<s> or I<t> are C<NULL>. Else it returns the
pointer to the written C<NUL>-terminating character in I<s>.
=item char *B<str_dup>(const char *I<s>, str_size_t I<n>);
This returns a copy of the characters in string I<s>, but never more than I<n>
characters if I<n> is greater than C<0>. It returns C<NULL> if I<s> is
C<NULL>. The returned string has to be deallocated later with free(3).
=item char *B<str_concat>(char *I<s>, ...);
This functions concatenates the characters of all string arguments into a new
allocated string and returns this new string. If I<s> is C<NULL> the function
returns C<NULL>. Else it returns the pointer to the written final
C<NUL>-terminating character in I<s>. The returned string later has to be
deallocated with free(3).
=item char *B<str_splice>(char *I<s>, str_size_t I<off>, str_size_t I<n>, char *I<t>, str_size_t I<m>);
This splices the string I<t> into string I<s>, i.e., the I<n> characters
at offset I<off> in I<s> are removed and at their location the string
I<t> is inserted (or just the first I<m> characters of I<t> if I<m> is
greater than C<0>). It returns C<NULL> if I<s> or I<t> are C<NULL>.
Else the string I<s> is returned. The function supports also the
situation where I<t> is a sub-string of I<s> as long as the area
I<s+off>...I<s+off+n> and I<t>...I<t+m> do not overlap. The caller
always has to make sure that enough room exists in I<s>.
=item int B<str_compare>(const char *I<s>, const char *I<t>, str_size_t I<n>, int I<mode>);
This performs a lexicographical comparison of the two strings I<s>
and I<t> (but never compares more than I<n> characters of them)
and returns one of three return values: a value lower than C<0> if
I<s> is lexicographically lower than I<t>, a value of exactly C<0>
if I<s> and I<t> are equal and a value greater than C<0> if I<s> is
lexicographically higher than I<t>. Per default (I<mode> is C<0>) the
comparison is case-sensitive, but if C<STR_NOCASE> is used for I<mode>
the comparison is done in a case-insensitive way.
=item char *B<str_span>(const char *I<s>, size_t I<n>, const char *I<charset>, int I<mode>);
This functions spans a string I<s> according to the characters specified in
I<charset>. If I<mode> is C<0>, this means that I<s> is spanned from left to
right starting at I<s> (and ending either when reaching the terminating C<NUL>
character or already after I<n> spanned characters) as long as the characters
of I<s> are contained in I<charset>.
Alternatively one can use a I<mode> of C<STR_COMPLEMENT> to indicate that I<s>
is spanned as long as the characters of I<s> are I<not> contained in
I<charset>, i.e., I<charset> then specifies the complement of the spanning
characters.
In both cases one can additionally "or" (with the C operator ``C<|>'')
C<STR_RIGHT> into I<mode> to indicate that the spanning is done right to
left starting at the terminating C<NUL> character of I<s> (and ending
either when reaching I<s> or already after I<n> spanned characters).
=item char *B<str_locate>(const char *I<s>, str_size_t I<n>, const char *I<t>);
This functions searches for the (smaller) string I<t> inside (larger) string
I<s>. If I<n> is not C<0>, the search is performed only inside the first I<n>
characters of I<s>.
=item char *B<str_token>(char **I<s>, const char *I<delim>, const char *I<quote>, const char *I<comment>, int I<mode>);
This function considers the string I<s> to consist of a sequence of
zero or more text tokens separated by spans of one or more characters
from the separator string I<delim>. However, text between matched pairs
of quotemarks (characters in I<quote>) is treated as plain text, never
as delimiter (separator) text. Each call of this function returns a
pointer to the first character of the first token of I<s>. The token is
C<NUL>-terminated, i.e., the string I<s> is processed in a destructive
way. If there are quotation marks or escape sequences, the input
string is rewritten with quoted sections and escape sequences properly
interpreted.
This function keeps track of its parsing position in the string between
separate calls by simply adjusting the callers I<s> pointer, so that
subsequent calls with the same pointer variable I<s> will start
processing from the position immediately after the last returned token.
In this way subsequent calls will work through the string I<s> until no
tokens remain. When no token remains in I<s>, C<NULL> is returned. The
string of token separators (I<delim>) and the string of quote characters
(I<quote>) may be changed from call to call.
If a character in the string I<s> is not quoted or escaped, and is in the
I<comment> set, then it is overwritten with a C<NUL> character and the rest of
the string is ignored. The characters to be used as quote characters are
specified in the I<quote> set, and must be used in balanced pairs. If there
is more than one flavor of quote character, one kind of quote character may be
used to quote another kind. If an unbalanced quote is found, the function
silently act as if one had been placed at the end of the input string. The
I<delim> and I<quote> strings must be disjoint, i.e., they have to share
no characters.
The I<mode> argument can be used to modify the processing of the string
(default for I<mode> is C<0>): C<STR_STRIPQUOTES> forces I<quote>
characters to be stripped from quoted tokens; C<STR_BACKSLASHESC>
enables the interpretation (and expansion) of backslash escape sequences
(`B<\x>') through ANSI-C rules; C<STR_SKIPDELIMS> forces that after the
terminating C<NUL> is written and the token returned, further delimiters
are skipped (this allows one to make sure that the delimiters for
one word don't become part of the next word if one change delimiters
between calls); and C<STR_TRIGRAPHS> enables the recognition and
expansion of ANSI C Trigraph sequences (as a side effect this enables
C<STR_BACKSLASHESC>, too).
=item int B<str_parse>(const char *I<s>, const char *I<pop>, ...);
This parses the string I<s> according to the parsing operation specified
by I<pop>. If the parsing operation succeeds, C<1> is returned. If the
parsing operation failed because the pattern I<pop> did not match, C<0>
is returned. If the parsing operation failed because the underlying
regular expression library failed, C<-1> is returned.
The I<pop> string usually has one of the following two syntax variants:
`B<m> I<delim> I<regex> I<delim> I<flags>*' (for matching operations)
and `B<s> I<delim> I<regex> I<delim> I<subst> I<delim> I<flags>*' (for
substitution operations). For more details about the syntax variants
and semantic of the I<pop> argument see section B<GORY DETAILS, Parsing
Specification> below. The syntax of the I<regex> part in I<pop> is
mostly equivalent to Perl 5's regular expression syntax. For the
complete and gory details see perlre(1). A brief summary you can find
under section B<GORY DETAILS, Perl Regular Expressions> below.
=item int B<str_format>(char *I<s>, str_size_t I<n>, const char *I<fmt>, ...);
This formats a new string according to I<fmt> and optionally following
arguments and writes it into the string I<s>, but never more than I<n>
characters at all. It returns the number of written characters. If I<s> is
C<NULL> it just calculates the number of characters which would be written.
The function generates the output string under the control of the I<fmt>
format string that specifies how subsequent arguments (or arguments accessed
via the variable-length argument facilities of stdarg(3)) are converted for
output.
The format string I<fmt> is composed of zero or more directives:
ordinary characters (not B<%>), which are copied unchanged to the output
stream; and conversion specifications, each of which results in fetching
zero or more subsequent arguments. Each conversion specification is
introduced by the character B<%>. The arguments must correspond properly
(after type promotion) with the conversion specifier. Which conversion
specifications are supported are described in detail under B<GORY
DETAILS, Format Specification> below.
=item unsigned long B<str_hash>(const char *I<s>, str_size_t I<n>, int I<mode>);
This function calculates a hash value of string I<s> (or of its first I<n>
characters if I<n> is equal to C<0>). The following hashing functions
are supported and can be selected with I<mode>: STR_HASH_DJBX33 (Daniel
J. Berstein, Times 33 Hash with Addition), STR_HASH_BJDDJ (Bob
Jenkins, Dr. Dobbs Journal), and STR_HASH_MACRC32 (Mark Adler, Cyclic
Redundancy Check with 32-Bit). This function is intended for fast use
in hashing algorithms and I<not> for use as cryptographically strong
message digests.
=item int B<str_base64>(char *I<s>, str_size_t I<n>, unsigned char *I<ucp>, str_size_t I<ucn>, int I<mode>);
This function Base64 encodes I<ucn> bytes starting at I<ucp> and writes
the resulting string into I<s> (but never more than I<n> characters are
written). The I<mode> for this operation has to be C<STR_BASE64_ENCODE>.
Additionally one can OR the value C<STR_BASE64_STRICT> to enable strict
encoding where after every 72th output character a newline character is
inserted. The function returns the number of output characters written.
If I<s> is C<NULL> the function just calculates the number of required
output characters.
Alternatively, if I<mode> is C<STR_BASE64_DECODE> the string I<s> (or
the first I<n> characters only if I<n> is not C<0>) is decoded and the
output bytes written at I<ucp>. Again, if I<ucp> is C<NULL> only the
number of required output bytes are calculated.
=back
=head1 GORY DETAILS
In this part of the documentation more complex topics are documented in
detail.
=head2 Perl Regular Expressions
The regular expressions used in B<OSSP str> are more or less Perl compatible
(they are provided by a stripped down and built-in version of the
I<PCRE> library). So the syntax description in perlre(1) applies
and don't has to be repeated here again. For a deeper understanding
and details you should have a look at the book `I<Mastering Regular
Expressions>' (see also the perlbook(1) manpage) by I<Jeffrey Friedl>.
For convenience reasons we give you only a brief summary of Perl
compatible regular expressions:
The following metacharacters have their standard egrep(1) meanings:
\ Quote the next metacharacter
^ Match the beginning of the line
. Match any character (except newline)
$ Match the end of the line (or before newline at the end)
| Alternation
() Grouping
[] Character class
The following standard quantifiers are recognized:
* Match 0 or more times (greedy)
*? Match 0 or more times (non greedy)
+ Match 1 or more times (greedy)
+? Match 1 or more times (non greedy)
? Match 1 or 0 times (greedy)
?? Match 1 or 0 times (non greedy)
{n} Match exactly n times (greedy)
{n}? Match exactly n times (non greedy)
{n,} Match at least n times (greedy)
{n,}? Match at least n times (non greedy)
{n,m} Match at least n but not more than m times (greedy)
{n,m}? Match at least n but not more than m times (non greedy)
The following backslash sequences are recognized:
\t Tab (HT, TAB)
\n Newline (LF, NL)
\r Return (CR)
\f Form feed (FF)
\a Alarm (bell) (BEL)
\e Escape (think troff) (ESC)
\033 Octal char
\x1B Hex char
\c[ Control char
\l Lowercase next char
\u Uppercase next char
\L Lowercase till \E
\U Uppercase till \E
\E End case modification
\Q Quote (disable) pattern metacharacters till \E
The following non zero-width assertions are recognized:
\w Match a "word" character (alphanumeric plus "_")
\W Match a non-word character
\s Match a whitespace character
\S Match a non-whitespace character
\d Match a digit character
\D Match a non-digit character
The following zero-width assertions are recognized:
\b Match a word boundary
\B Match a non-(word boundary)
\A Match only at beginning of string
\Z Match only at end of string, or before newline at the end
\z Match only at end of string
\G Match only where previous m//g left off (works only with /g)
The following regular expression extensions are recognized:
(?#text) An embedded comment
(?:pattern) This is for clustering, not capturing (simple)
(?imsx-imsx:pattern) This is for clustering, not capturing (full)
(?=pattern) A zero-width positive lookahead assertion
(?!pattern) A zero-width negative lookahead assertion
(?<=pattern) A zero-width positive lookbehind assertion
(?<!pattern) A zero-width negative lookbehind assertion
(?>pattern) An "independent" subexpression
(?(cond)yes-re) Conditional expression (simple)
(?(cond)yes-re|no-re) Conditional expression (full)
(?imsx-imsx) One or more embedded pattern-match modifiers
=head2 Parsing Specification
The B<str_parse>(const char *I<s>, const char *I<pop>, ...) function
is a very flexible but complex one. The argument I<s> is the string on
which the parsing operation specified by argument I<pop> is applied.
The parsing semantics are highly influenced by Perl's `B<=~>' matching
operator, because one of the main goals of str_parse(3) is to allow one
to rewrite typical Perl matching constructs into C.
Now to the gory details. In general, the I<pop> argument of str_parse(3)
has one of the following two syntax variants:
=over 4
=item B<Matching:> `B<m> I<delim> I<regex> I<delim> I<flags>*':
This matches I<s> against the Perl-style regular expression I<regex>
under the control of zero or more I<flags> which control the parsing
semantics. The stripped down I<pop> syntax `I<regex>' is equivalent to
`B<m/>I<regex>B</>'.
For each grouping pair of parenthesis in I<regex>, the text in I<s>
which was grouped by the parenthesis is extracted into new strings.
These per default are allocated as seperate strings and returned to the
caller through following `B<char **>' arguments. The caller is required
to free(3) them later.
=item B<Substitution:> `B<s> I<delim> I<regex> I<delim> I<subst> I<delim> I<flags>*':
This matches I<s> against the Perl-style regular expression I<regex>
under the control of zero or more I<flags> which control the parsing
semantics. As a result of the operation, a new string formed which
consists of I<s> but with the part which matched I<regex> replaced by
I<subst>. The result string is returned to the caller through a `B<char
**>' argument. The caller is required to free(3) this later.
For each grouping pair of parenthesis in I<regex>, the text in I<s>
which was grouped by the parenthesis is extracted into new strings
and can be referenced for expansion via `B<$n>' (n=1,..) in I<subst>.
Additionally any str_format(3) style `B<%>' constructs in I<subst> are
expanded through additional caller supplied arguments.
=back
The following I<flags> are supported:
=over 4
=item B<b>
If the I<bundle> flag `B<b>' is specified, the extracted strings are
bundled together into a single chunk of memory and its address is
returned to the caller with a additional `B<char **>' argument which has
to preceed the regular string arguments. The caller then has to free(3)
only this chunk of memory in order to free all extracted strings at
once.
=item B<i>
If the case-I<insensitive> flag `B<i>' is specified, I<regex>
is matched in case-insensitive way.
=item B<o>
If the I<once> flag `B<o>' is specified, this indicates to the B<OSSP str>
library that the whole I<pop> string is constant and that its internal
pre-processing (it is compiled into a deterministic finite automaton
(DFA) internally) has to be done only once (the B<OSSP str> library then
caches the DFA which corresponds to the I<pop> argument).
=item B<x>
If the I<extended> flag `B<x>' is specified, the I<regex>'s legibility
is extended by permitting embedded whitespace and comments to allow one
to write down complex regular expressions more cleary and even in a
documented way.
=item B<m>
If the I<multiple> lines flag `B<m>' is specified, the string I<s> is
treated as multiple lines. That is, this changes the regular expression
meta characters `B<^>' and `B<$>' from matching at only the very start
or end of the string I<s> to the start or end of any line anywhere
within the string I<s>.
=item B<s>
If the I<single> line flag `B<s>' is specified, the string I<s> is
treated as single line. That is, this changes the regular expression
meta character `B<.>' to match any character whatsoever, even a newline,
which it normally would not match.
=back
=head1 CONVERSION SPECIFICATION
In the format string of str_format(3) each conversion specification is
introduced by the character B<%>. After the B<%>, the following appear
in sequence:
=over 4
=item o
An optional field, consisting of a decimal digit string followed by a B<$>,
specifying the next argument to access. If this field is not provided, the
argument following the last argument accessed will be used. Arguments are
numbered starting at B<1>. If unaccessed arguments in the format string are
interspersed with ones that are accessed the results will be indeterminate.
=item o
Zero or more of the following flags:
A B<#> character specifying that the value should be converted to an
``alternate form''. For B<c>, B<d>, B<i>, B<n>, B<p>, B<s>, and B<u>,
conversions, this option has no effect. For B<o> conversions, the precision
of the number is increased to force the first character of the output string
to a zero (except if a zero value is printed with an explicit precision of
zero). For B<x> and B<X> conversions, a non-zero result has the string B<0x>
(or B<0X> for B<X> conversions) prepended to it. For B<e>, B<E>, B<f>, B<g>,
and B<G>, conversions, the result will always contain a decimal point, even if
no digits follow it (normally, a decimal point appears in the results of those
conversions only if a digit follows). For B<g> and B<G> conversions, trailing
zeros are not removed from the result as they would otherwise be.
A zero `B<0>' character specifying zero padding. For all conversions except
B<n>, the converted value is padded on the left with zeros rather than blanks.
If a precision is given with a numeric conversion (B<d>, B<i>, B<o>, B<u>,
B<i>, B<x>, and B<X>), the `B<0>' flag is ignored.
A negative field width flag `B<->' indicates the converted value is to be left
adjusted on the field boundary. Except for B<n> conversions, the converted
value is padded on the right with blanks, rather than on the left with blanks
or zeros. A `B<->' overrides a `B<0>' if both are given.
A space, specifying that a blank should be left before a positive number
produced by a signed conversion (B<d>, B<e>, B<E>, B<f>, B<g>, B<G>, or B<i>).
A `B<+>' character specifying that a sign always be placed before a number
produced by a signed conversion. A `B<+>' overrides a space if both are used.
=item o
An optional decimal digit string specifying a minimum field width.
If the converted value has fewer characters than the field width, it will
be padded with spaces on the left (or right, if the left-adjustment
flag has been given) to fill out
the field width.
=item o
An optional precision, in the form of a period `B<.>' followed by an
optional digit string. If the digit string is omitted, the precision is
taken as zero. This gives the minimum number of digits to appear for
B<d>, B<i>, B<o>, B<u>, B<x>, and B<X> conversions, the number of digits
to appear after the decimal-point for B<e>, B<E>, and B<f> conversions,
the maximum number of significant digits for B<g> and B<G> conversions,
or the maximum number of characters to be printed from a string for B<s>
conversions.
=item o
The optional character B<h>, specifying that a following B<d>, B<i>, B<o>,
B<u>, B<x>, or B<X> conversion corresponds to a `C<short int>' or `C<unsigned
short int>' argument, or that a following B<n> conversion corresponds to a
pointer to a `C<short int> argument.
=item o
The optional character B<l> (ell) specifying that a following B<d>, B<i>,
B<o>, B<u>, B<x>, or B<X> conversion applies to a pointer to a `C<long int>'
or `C<unsigned long int>' argument, or that a following B<n> conversion
corresponds to a pointer to a `C<long int> argument.
=item o
The optional character B<q>, specifying that a following B<d>, B<i>, B<o>,
B<u>, B<x>, or B<X> conversion corresponds to a `C<quad int>' or `C<unsigned
quad int>' argument, or that a following B<n> conversion corresponds to a
pointer to a `C<quad int>' argument.
=item o
The character B<L> specifying that a following B<e>, B<E>, B<f>, B<g>, or B<G>
conversion corresponds to a `C<long double>' argument.
=item o
A character that specifies the type of conversion to be applied.
=back
A field width or precision, or both, may be indicated by an asterisk `B<*>' or
an asterisk followed by one or more decimal digits and a `B<$>' instead of a
digit string. In this case, an `C<int>' argument supplies the field width or
precision. A negative field width is treated as a left adjustment flag
followed by a positive field width; a negative precision is treated as though
it were missing. If a single format directive mixes positional (`B<nn$>') and
non-positional arguments, the results are undefined.
The conversion specifiers and their meanings are:
=over 4
=item B<diouxX>
The `C<int>' (or appropriate variant) argument is converted to signed decimal
(B<d> and B<i>), unsigned octal (B<o>), unsigned decimal (B<u>), or unsigned
hexadecimal (B<x> and B<X>) notation. The letters B<abcdef> are used for B<x>
conversions; the letters B<ABCDEF> are used for B<X> conversions. The
precision, if any, gives the minimum number of digits that must appear; if the
converted value requires fewer digits, it is padded on the left with zeros.
=item B<DOU>
The `C<long int> argument is converted to signed decimal, unsigned octal, or
unsigned decimal, as if the format had been B<ld>, B<lo>, or B<lu>
respectively. These conversion characters are deprecated, and will eventually
disappear.
=item B<eE>
The `C<double>' argument is rounded and converted in the style
`[-]d.dddB<e>+-dd' where there is one digit before the decimal-point character
and the number of digits after it is equal to the precision; if the precision
is missing, it is taken as 6; if the precision is zero, no decimal-point
character appears. An B<E> conversion uses the letter B<E> (rather than B<e>)
to introduce the exponent. The exponent always contains at least two digits;
if the value is zero, the exponent is 00.
=item B<f>
The `C<double>' argument is rounded and converted to decimal notation in the
style `[-]ddd.ddd>' where the number of digits after the decimal-point
character is equal to the precision specification. If the precision is
missing, it is taken as 6; if the precision is explicitly zero, no
decimal-point character appears. If a decimal point appears, at least one
digit appears before it.
=item B<g>
The `C<double>' argument is converted in style B<f> or B<e> (or B<E> for B<G>
conversions). The precision specifies the number of significant digits. If
the precision is missing, 6 digits are given; if the precision is zero, it is
treated as 1. Style B<e> is used if the exponent from its conversion is less
than -4 or greater than or equal to the precision. Trailing zeros are removed
from the fractional part of the result; a decimal point appears only if it is
followed by at least one digit.
=item B<c>
The `C<int>' argument is converted to an `C<unsigned char>, and the resulting
character is written.
=item B<s>
The `C<char *>' argument is expected to be a pointer to an array of character
type (pointer to a string). Characters from the array are written up to (but
not including) a terminating C<NUL> character; if a precision is specified, no
more than the number specified are written. If a precision is given, no null
character need be present; if the precision is not specified, or is greater
than the size of the array, the array must contain a terminating C<NUL>
character.
=item B<p>
The `C<void *> pointer argument is printed in hexadecimal (as if by `B<%#x>'
or `C<%#lx>).
=item B<n>
The number of characters written so far is stored into the integer indicated
by the `C<int *>' (or variant) pointer argument. No argument is converted.
=item B<%>
A `B<%>' is written. No argument is converted. The complete conversion
specification is `B<%%>.
=back
In no case does a non-existent or small field width cause truncation of a
field; if the result of a conversion is wider than the field width, the field
is expanded to contain the conversion result.
=head1 EXAMPLES
In the following a few snippets of selected use cases of B<OSSP str> are
presented:
=over 4
=item B<Splice a String into Another>
char *v1 = "foo bar quux";
char *v2 = "baz";
str_splice(v1, 3, 5, v2, 0):
/* now we have v1 = "foobazquux" */
....
=item B<Tokenize a String>
char *var = " foo \t \" bar 'baz'\" q'uu'x #comment";
char *tok, *p;
p = var;
while ((tok = str_token(p, ":", "\"'", "#", 0)) != NULL) {
/* here we enter three times:
1. tok = "foo"
2. tok = " bar 'baz'"
3. tok = "quux" */
...
}
=item B<Match a String>
char *var = "foo:bar";
if (str_parse(var, "^.+?:.+$/") > 0) {
/* var matched */
...
}
=item B<Match a String and Go Ahead with Details>
char *var = "foo:bar";
char *cp, *v1, *v2;
if (str_parse(var, "m/^(.+?):(.+)$/b", &cp, &v1, &v2) > 0) {
...
/* now we have:
cp = "foo\0bar\0" and v1 and v2 pointing
into it, i.e., v1 = "foo", v2 = "bar" */
...
free(cp);
}
=item B<Substitute Text in a String>
char *var = "foo:bar";
char *subst = "quux";
char *new;
str_parse(var, "s/^(.+?):(.+)$/$1-%s-$2/", &new, subst);
...
/* now we have: var = "foo:bar", new = "foo:quux:bar" */
...
free(new);
=item B<Format a String>
char *v0 = "abc..."; /* length not guessable */
char *v1 = "foo";
void *v2 = 0xDEAD;
int v3 = 42;
char *cp;
int n;
n = str_format(NULL, 0, "%s|%5s-%x-%04d", v0, v1, v2, v3);
cp = malloc(n);
str_format(cp, n, "%s-%x-%04d", v1, v2, v3);
/* now we have cp = "abc...| foo-DEAD-0042" */
...
free(cp);
=back
=head1 SEE ALSO
string(3), printf(3), perlre(1).
=head1 HISTORY
B<OSSP str> was written in November and December 1999 by Ralf S.
Engelschall for the B<OSSP> project. As building blocks various existing
code was used and recycled: for the str_token(3) implementation an
anchient strtok(3) flavor from William Deich 1991 was cleaned up
and adjusted. As the background parsing engine for str_parse(3) a
heavily stripped down version of Philip Hazel's Perl Compatible
Regular Expression (PCRE) library (initially version 2.08 and now
3.9) was used. The str_format(3) implementation was based on Panos
Tsirigotis' sprintf(3) code as adjusted by the Apache Software
Foundation (ASF) 1998. The formatting engine was stripped down and
enhanced to support internal extensions which were required by
str_format(3) and str_parse(3).
=head1 AUTHOR
Ralf S. Engelschall
rse@engelschall.com
www.engelschall.com
=cut
