ossp-pkg/l2/configure
#! /bin/sh
# From configure.ac 1.0.
# Guess values for system-dependent variables and create Makefiles.
# Generated by Autoconf 2.52.
#
# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# configuration header
if test ".`echo dummy $@ | grep help`" = .; then
# bootstrapping shtool
ac_prog=$0
ac_srcdir=`echo $ac_prog | sed -e 's%/[^/][^/]*$%%' -e 's%\([^/]\)/*$%\1%'`
test ".$ac_srcdir" = ".$ac_prog" && ac_srcdir=.
ac_shtool="$ac_srcdir/shtool"
# find out terminal sequences
TB=`$ac_shtool echo -n -e %B 2>/dev/null`
TN=`$ac_shtool echo -n -e %b 2>/dev/null`
# find out package version
L2_VERSION_STR="`$ac_shtool version -l c -d long $ac_srcdir/l2_version.c`"
# friendly header ;)
echo "Configuring ${TB}L2${TN} (Logging Library), Version ${TB}${L2_VERSION_STR}${TN}"
echo "Copyright (c) 2001 The OSSP Project (http://www.ossp.org/)
Copyright (c) 2001 Cable & Wireless Deutschland (http://www.cw.com/de/)"
# additionally find out hex version
L2_VERSION_HEX="`$ac_shtool version -l c -d hex $ac_srcdir/l2_version.c`"
fi
# Find the correct PATH separator. Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
UNAME=${UNAME-`uname 2>/dev/null`}
case X$UNAME in
*-DOS) lt_cv_sys_path_separator=';' ;;
*) lt_cv_sys_path_separator=':' ;;
esac
fi
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
case X$ECHO in
X*--fallback-echo)
# Remove one level of quotation (which was required for Make).
ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
;;
esac
echo=${ECHO-echo}
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
# Yippee, $echo works!
:
else
# Restart under the correct shell.
exec $SHELL "$0" --no-reexec ${1+"$@"}
fi
if test "X$1" = X--fallback-echo; then
# used as fallback echo
shift
cat <<EOF
EOF
exit 0
fi
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
if (echo_test_string="`eval $cmd`") 2>/dev/null &&
echo_test_string="`eval $cmd`" &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
fi
done
fi
if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
:
else
# The Solaris, AIX, and Digital Unix default echo programs unquote
# backslashes. This makes it impossible to quote backslashes using
# echo "$something" | sed 's/\\/\\\\/g'
#
# So, first we look for a working echo in the user's PATH.
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
for dir in $PATH /usr/ucb; do
if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
echo="$dir/echo"
break
fi
done
IFS="$save_ifs"
if test "X$echo" = Xecho; then
# We didn't find a better echo, so look for alternatives.
if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
# This shell has a builtin print -r that does the trick.
echo='print -r'
elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
test "X$CONFIG_SHELL" != X/bin/ksh; then
# If we have ksh, try running configure again with it.
ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
export ORIGINAL_CONFIG_SHELL
CONFIG_SHELL=/bin/ksh
export CONFIG_SHELL
exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
else
# Try using printf.
echo='printf %s\n'
if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
# Cool, printf works
:
elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
test "X$echo_testing_string" = 'X\t' &&
echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
export CONFIG_SHELL
SHELL="$CONFIG_SHELL"
export SHELL
echo="$CONFIG_SHELL $0 --fallback-echo"
elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
test "X$echo_testing_string" = 'X\t' &&
echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
echo="$CONFIG_SHELL $0 --fallback-echo"
else
# maybe with a smaller string...
prev=:
for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
then
break
fi
prev="$cmd"
done
if test "$prev" != 'sed 50q "$0"'; then
echo_test_string=`eval $prev`
export echo_test_string
exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
else
# Oops. We lost completely, so just stick with echo.
echo=echo
fi
fi
fi
fi
fi
fi
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
ECHO=$echo
if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
# Sed expression to map a string onto a valid variable name.
as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
# Name of the executable.
as_me=`echo "$0" |sed 's,.*[\\/],,'`
if expr a : '\(a\)' >/dev/null 2>&1; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
# We could just check for DJGPP; but this test a) works b) is more generic
# and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
if test -f conf$$.exe; then
# Don't use ln at all; we don't have any links
as_ln_s='cp -p'
else
as_ln_s='ln -s'
fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file
as_executable_p="test -f"
# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
fi
# NLS nuisances.
$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" $as_nl"
# CDPATH.
$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
exec 6>&1
#
# Initializations.
#
ac_default_prefix=/usr/local
cross_compiling=no
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
# This variable seems obsolete. It should probably be removed, and
# only ac_max_sed_lines should be used.
: ${ac_max_here_lines=38}
ac_unique_file="README"
ac_default_prefix=/usr/local
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE
# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Identity of this package.
PACKAGE_NAME=
PACKAGE_TARNAME=
PACKAGE_VERSION=
PACKAGE_STRING=
PACKAGE_BUGREPORT=
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
# Accept the important Cygnus configure options, so we can diagnose typos.
case $ac_option in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file=$ac_optarg ;;
--config-cache | -C)
cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir=$ac_optarg ;;
-disable-* | --disable-*)
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/-/_/g'`
eval "enable_$ac_feature=no" ;;
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/-/_/g'`
case $ac_option in
*=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
eval "enable_$ac_feature='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he | -h)
ac_init_help=long ;;
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
ac_init_help=recursive ;;
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
ac_init_help=short ;;
-host | --host | --hos | --ho)
ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers | -V)
ac_init_version=: ;;
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package| sed 's/-/_/g'`
case $ac_option in
*=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
eval "with_$ac_package='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package | sed 's/-/_/g'`
eval "with_$ac_package=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
-*) { echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
eval "$ac_envvar='$ac_optarg'"
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
esac
done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
{ echo "$as_me: error: missing argument to $ac_option" >&2
{ (exit 1); exit 1; }; }
fi
# Be sure to have absolute paths.
for ac_var in exec_prefix prefix
do
eval ac_val=$`echo $ac_var`
case $ac_val in
[\\/$]* | ?:[\\/]* | NONE | '' ) ;;
*) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
{ (exit 1); exit 1; }; };;
esac
done
# Be sure to have absolute paths.
for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
localstatedir libdir includedir oldincludedir infodir mandir
do
eval ac_val=$`echo $ac_var`
case $ac_val in
[\\/$]* | ?:[\\/]* ) ;;
*) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
{ (exit 1); exit 1; }; };;
esac
done
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
build=$build_alias
host=$host_alias
target=$target_alias
# FIXME: should be removed in autoconf 3.0.
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
fi
ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-
test "$silent" = yes && exec 6>/dev/null
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2
{ (exit 1); exit 1; }; }
else
{ echo "$as_me: error: cannot find sources in $srcdir" >&2
{ (exit 1); exit 1; }; }
fi
fi
srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
ac_env_build_alias_set=${build_alias+set}
ac_env_build_alias_value=$build_alias
ac_cv_env_build_alias_set=${build_alias+set}
ac_cv_env_build_alias_value=$build_alias
ac_env_host_alias_set=${host_alias+set}
ac_env_host_alias_value=$host_alias
ac_cv_env_host_alias_set=${host_alias+set}
ac_cv_env_host_alias_value=$host_alias
ac_env_target_alias_set=${target_alias+set}
ac_env_target_alias_value=$target_alias
ac_cv_env_target_alias_set=${target_alias+set}
ac_cv_env_target_alias_value=$target_alias
ac_env_CC_set=${CC+set}
ac_env_CC_value=$CC
ac_cv_env_CC_set=${CC+set}
ac_cv_env_CC_value=$CC
ac_env_CFLAGS_set=${CFLAGS+set}
ac_env_CFLAGS_value=$CFLAGS
ac_cv_env_CFLAGS_set=${CFLAGS+set}
ac_cv_env_CFLAGS_value=$CFLAGS
ac_env_LDFLAGS_set=${LDFLAGS+set}
ac_env_LDFLAGS_value=$LDFLAGS
ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
ac_cv_env_LDFLAGS_value=$LDFLAGS
ac_env_CPPFLAGS_set=${CPPFLAGS+set}
ac_env_CPPFLAGS_value=$CPPFLAGS
ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
ac_cv_env_CPPFLAGS_value=$CPPFLAGS
ac_env_CXX_set=${CXX+set}
ac_env_CXX_value=$CXX
ac_cv_env_CXX_set=${CXX+set}
ac_cv_env_CXX_value=$CXX
ac_env_CXXFLAGS_set=${CXXFLAGS+set}
ac_env_CXXFLAGS_value=$CXXFLAGS
ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
ac_cv_env_CXXFLAGS_value=$CXXFLAGS
ac_env_CPP_set=${CPP+set}
ac_env_CPP_value=$CPP
ac_cv_env_CPP_set=${CPP+set}
ac_cv_env_CPP_value=$CPP
#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<EOF
\`configure' configures this package to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print \`checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
EOF
cat <<EOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--infodir=DIR info documentation [PREFIX/info]
--mandir=DIR man documentation [PREFIX/man]
EOF
cat <<\EOF
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST build programs to run on HOST [BUILD]
EOF
fi
if test -n "$ac_init_help"; then
cat <<\EOF
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-debug build for debugging (default=no)
--enable-shared=PKGS build shared libraries default=yes
--enable-static=PKGS build static libraries default=yes
--enable-fast-install=PKGS optimize for fast installation default=yes
--disable-libtool-lock avoid locking (might break parallel builds)
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-cxx build C++ library (default=no)
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-pic try to use only PIC/non-PIC objects default=use both
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
headers in a nonstandard directory <include dir>
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
EOF
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
ac_popdir=`pwd`
for ac_subdir in : $ac_subdirs_all; do test "x$ac_subdir" = x: && continue
cd $ac_subdir
# A "../" for each directory in /$ac_subdir.
ac_dots=`echo $ac_subdir |
sed 's,^\./,,;s,[^/]$,&/,;s,[^/]*/,../,g'`
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_sub_srcdir=$srcdir ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_sub_srcdir=$srcdir/$ac_subdir ;;
*) # Relative path.
ac_sub_srcdir=$ac_dots$srcdir/$ac_subdir ;;
esac
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_sub_srcdir/configure.gnu; then
echo
$SHELL $ac_sub_srcdir/configure.gnu --help=recursive
elif test -f $ac_sub_srcdir/configure; then
echo
$SHELL $ac_sub_srcdir/configure --help=recursive
elif test -f $ac_sub_srcdir/configure.ac ||
test -f $ac_sub_srcdir/configure.in; then
echo
$ac_configure --help
else
echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
fi
cd $ac_popdir
done
fi
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\EOF
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
EOF
exit 0
fi
exec 5>config.log
cat >&5 <<EOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
generated by GNU Autoconf 2.52. Invocation command line was
$ $0 $@
EOF
{
cat <<_ASUNAME
## ---------- ##
## Platform. ##
## ---------- ##
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
PATH = $PATH
_ASUNAME
} >&5
cat >&5 <<EOF
## ------------ ##
## Core tests. ##
## ------------ ##
EOF
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell meta-characters.
ac_configure_args=
ac_sep=
for ac_arg
do
case $ac_arg in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
ac_sep=" " ;;
*) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
ac_sep=" " ;;
esac
# Get rid of the leading space.
done
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
echo >&5
echo "## ----------------- ##" >&5
echo "## Cache variables. ##" >&5
echo "## ----------------- ##" >&5
echo >&5
# The following way of writing the cache mishandles newlines in values,
{
(set) 2>&1 |
case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
*ac_space=\ *)
sed -n \
"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
;;
*)
sed -n \
"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
;;
esac;
} >&5
sed "/^$/d" confdefs.h >conftest.log
if test -s conftest.log; then
echo >&5
echo "## ------------ ##" >&5
echo "## confdefs.h. ##" >&5
echo "## ------------ ##" >&5
echo >&5
cat conftest.log >&5
fi
(echo; echo) >&5
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal" >&5
echo "$as_me: exit $exit_status" >&5
rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo >confdefs.h
# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
{ echo "$as_me:1030: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
cat "$ac_site_file" >&5
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
{ echo "$as_me:1041: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . $cache_file;;
*) . ./$cache_file;;
esac
fi
else
{ echo "$as_me:1049: creating cache $cache_file" >&5
echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in `(set) 2>&1 |
sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
eval ac_old_val="\$ac_cv_env_${ac_var}_value"
eval ac_new_val="\$ac_env_${ac_var}_value"
case $ac_old_set,$ac_new_set in
set,)
{ echo "$as_me:1065: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
{ echo "$as_me:1069: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
{ echo "$as_me:1075: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
{ echo "$as_me:1077: former value: $ac_old_val" >&5
echo "$as_me: former value: $ac_old_val" >&2;}
{ echo "$as_me:1079: current value: $ac_new_val" >&5
echo "$as_me: current value: $ac_new_val" >&2;}
ac_cache_corrupted=:
fi;;
esac
# Pass precious variables to config.status. It doesn't matter if
# we pass some twice (in addition to the command line arguments).
if test "$ac_new_set" = set; then
case $ac_new_val in
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"`
ac_configure_args="$ac_configure_args '$ac_arg'"
;;
*) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val"
;;
esac
fi
done
if $ac_cache_corrupted; then
{ echo "$as_me:1098: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
{ { echo "$as_me:1100: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
{ (exit 1); exit 1; }; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
*c*,-n*) ECHO_N= ECHO_C='
' ECHO_T=' ' ;;
*c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
*) ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac
echo "#! $SHELL" >conftest.sh
echo "exit 0" >>conftest.sh
chmod +x conftest.sh
if { (echo "$as_me:1120: PATH=\".;.\"; conftest.sh") >&5
(PATH=".;."; conftest.sh) 2>&5
ac_status=$?
echo "$as_me:1123: \$? = $ac_status" >&5
(exit $ac_status); }; then
ac_path_separator=';'
else
ac_path_separator=:
fi
PATH_SEPARATOR="$ac_path_separator"
rm -f conftest.sh
ac_config_headers="$ac_config_headers l2_config.h"
if test ".$host" != .NONE && test ".$host" != .; then
PLATFORM="$host"
else
PLATFORM=`${CONFIG_SHELL-/bin/sh} $srcdir/config.guess`
fi
PLATFORM=`${CONFIG_SHELL-/bin/sh} $srcdir/config.sub $PLATFORM` || exit 1
if test ".$enable_subdir" != .yes; then
echo "Platform: ${TB}${PLATFORM}${TN}"
fi
echo ""
echo "$as_me:1147: checking whether to build C++ library" >&5
echo $ECHO_N "checking whether to build C++ library... $ECHO_C" >&6
LIBL2XX_LA=""
L2_TESTXX=""
L2XX_3=""
TEST_CXX=""
INSTALL_CXX=""
UNINSTALL_CXX=""
# Check whether --with-cxx or --without-cxx was given.
if test "${with_cxx+set}" = set; then
withval="$with_cxx"
LIBL2XX_LA="libl2++.la"
L2_TESTXX="l2_test++"
L2XX_3="l2++.3"
TEST_CXX=test-cxx
INSTALL_CXX=install-cxx
UNINSTALL_CXX=uninstall-cxx
else
with_cxx=no
fi; echo "$as_me:1171: result: $with_cxx" >&5
echo "${ECHO_T}$with_cxx" >&6
echo "$as_me:1174: checking whether ${MAKE-make} sets \${MAKE}" >&5
echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\EOF
all:
@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
eval ac_cv_prog_make_${ac_make}_set=yes
else
eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftest.make
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
echo "$as_me:1194: result: yes" >&5
echo "${ECHO_T}yes" >&6
SET_MAKE=
else
echo "$as_me:1198: result: no" >&5
echo "${ECHO_T}no" >&6
SET_MAKE="MAKE=${MAKE-make}"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
echo "$as_me:1211: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_CC="${ac_tool_prefix}gcc"
echo "$as_me:1226: found $ac_dir/$ac_word" >&5
break
done
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
echo "$as_me:1234: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
echo "$as_me:1237: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo "$as_me:1246: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_CC="gcc"
echo "$as_me:1261: found $ac_dir/$ac_word" >&5
break
done
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
echo "$as_me:1269: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
echo "$as_me:1272: result: no" >&5
echo "${ECHO_T}no" >&6
fi
CC=$ac_ct_CC
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
echo "$as_me:1285: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_CC="${ac_tool_prefix}cc"
echo "$as_me:1300: found $ac_dir/$ac_word" >&5
break
done
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
echo "$as_me:1308: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
echo "$as_me:1311: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo "$as_me:1320: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_CC="cc"
echo "$as_me:1335: found $ac_dir/$ac_word" >&5
break
done
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
echo "$as_me:1343: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
echo "$as_me:1346: result: no" >&5
echo "${ECHO_T}no" >&6
fi
CC=$ac_ct_CC
else
CC="$ac_cv_prog_CC"
fi
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo "$as_me:1359: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_prog_rejected=no
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
echo "$as_me:1379: found $ac_dir/$ac_word" >&5
break
done
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" ${1+"$@"}
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
echo "$as_me:1401: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
echo "$as_me:1404: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
for ac_prog in cl
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
echo "$as_me:1415: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
echo "$as_me:1430: found $ac_dir/$ac_word" >&5
break
done
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
echo "$as_me:1438: result: $CC" >&5
echo "${ECHO_T}$CC" >&6
else
echo "$as_me:1441: result: no" >&5
echo "${ECHO_T}no" >&6
fi
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
for ac_prog in cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo "$as_me:1454: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_CC="$ac_prog"
echo "$as_me:1469: found $ac_dir/$ac_word" >&5
break
done
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
echo "$as_me:1477: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6
else
echo "$as_me:1480: result: no" >&5
echo "${ECHO_T}no" >&6
fi
test -n "$ac_ct_CC" && break
done
CC=$ac_ct_CC
fi
fi
test -z "$CC" && { { echo "$as_me:1492: error: no acceptable cc found in \$PATH" >&5
echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
echo "$as_me:1497:" \
"checking for C compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:1500: \"$ac_compiler --version </dev/null >&5\"") >&5
(eval $ac_compiler --version </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:1503: \$? = $ac_status" >&5
(exit $ac_status); }
{ (eval echo "$as_me:1505: \"$ac_compiler -v </dev/null >&5\"") >&5
(eval $ac_compiler -v </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:1508: \$? = $ac_status" >&5
(exit $ac_status); }
{ (eval echo "$as_me:1510: \"$ac_compiler -V </dev/null >&5\"") >&5
(eval $ac_compiler -V </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:1513: \$? = $ac_status" >&5
(exit $ac_status); }
cat >conftest.$ac_ext <<_ACEOF
#line 1517 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.exe"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
echo "$as_me:1533: checking for C compiler default output" >&5
echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
if { (eval echo "$as_me:1536: \"$ac_link_default\"") >&5
(eval $ac_link_default) 2>&5
ac_status=$?
echo "$as_me:1539: \$? = $ac_status" >&5
(exit $ac_status); }; then
# Find the output, starting from the most likely. This scheme is
# not robust to junk in `.', hence go to wildcards (a.*) only as a last
# resort.
for ac_file in `ls a.exe conftest.exe 2>/dev/null;
ls a.out conftest 2>/dev/null;
ls a.* conftest.* 2>/dev/null`; do
case $ac_file in
*.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
a.out ) # We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
# FIXME: I believe we export ac_cv_exeext for Libtool --akim.
export ac_cv_exeext
break;;
* ) break;;
esac
done
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
{ { echo "$as_me:1562: error: C compiler cannot create executables" >&5
echo "$as_me: error: C compiler cannot create executables" >&2;}
{ (exit 77); exit 77; }; }
fi
ac_exeext=$ac_cv_exeext
echo "$as_me:1568: result: $ac_file" >&5
echo "${ECHO_T}$ac_file" >&6
# Check the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
echo "$as_me:1573: checking whether the C compiler works" >&5
echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
if { ac_try='./$ac_file'
{ (eval echo "$as_me:1579: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:1582: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
{ { echo "$as_me:1589: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'." >&5
echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
fi
echo "$as_me:1597: result: yes" >&5
echo "${ECHO_T}yes" >&6
rm -f a.out a.exe conftest$ac_cv_exeext
ac_clean_files=$ac_clean_files_save
# Check the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
echo "$as_me:1604: checking whether we are cross compiling" >&5
echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
echo "$as_me:1606: result: $cross_compiling" >&5
echo "${ECHO_T}$cross_compiling" >&6
echo "$as_me:1609: checking for executable suffix" >&5
echo $ECHO_N "checking for executable suffix... $ECHO_C" >&6
if { (eval echo "$as_me:1611: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:1614: \$? = $ac_status" >&5
(exit $ac_status); }; then
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
case $ac_file in
*.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
export ac_cv_exeext
break;;
* ) break;;
esac
done
else
{ { echo "$as_me:1630: error: cannot compute EXEEXT: cannot compile and link" >&5
echo "$as_me: error: cannot compute EXEEXT: cannot compile and link" >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f conftest$ac_cv_exeext
echo "$as_me:1636: result: $ac_cv_exeext" >&5
echo "${ECHO_T}$ac_cv_exeext" >&6
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
echo "$as_me:1642: checking for object suffix" >&5
echo $ECHO_N "checking for object suffix... $ECHO_C" >&6
if test "${ac_cv_objext+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line 1648 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { (eval echo "$as_me:1660: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:1663: \$? = $ac_status" >&5
(exit $ac_status); }; then
for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
{ { echo "$as_me:1675: error: cannot compute OBJEXT: cannot compile" >&5
echo "$as_me: error: cannot compute OBJEXT: cannot compile" >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
echo "$as_me:1682: result: $ac_cv_objext" >&5
echo "${ECHO_T}$ac_cv_objext" >&6
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
echo "$as_me:1686: checking whether we are using the GNU C compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
if test "${ac_cv_c_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line 1692 "configure"
#include "confdefs.h"
int
main ()
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:1707: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:1710: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:1713: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:1716: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
echo "$as_me:1728: result: $ac_cv_c_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
CFLAGS="-g"
echo "$as_me:1734: checking whether $CC accepts -g" >&5
echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
if test "${ac_cv_prog_cc_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line 1740 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:1752: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:1755: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:1758: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:1761: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_g=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:1771: result: $ac_cv_prog_cc_g" >&5
echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
# Some people use a C++ compiler to compile C. Since we use `exit',
# in C++ we need to declare it. In case someone uses the same compiler
# for both compiling C and C++ we need to have the C++ compiler decide
# the declaration of exit, since it's the most demanding environment.
cat >conftest.$ac_ext <<_ACEOF
#ifndef __cplusplus
choke me
#endif
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:1798: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:1801: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:1804: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:1807: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
for ac_declaration in \
''\
'#include <stdlib.h>' \
'extern "C" void std::exit (int) throw (); using std::exit;' \
'extern "C" void std::exit (int); using std::exit;' \
'extern "C" void exit (int) throw ();' \
'extern "C" void exit (int);' \
'void exit (int);'
do
cat >conftest.$ac_ext <<_ACEOF
#line 1819 "configure"
#include "confdefs.h"
#include <stdlib.h>
$ac_declaration
int
main ()
{
exit (42);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:1832: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:1835: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:1838: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:1841: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
:
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
continue
fi
rm -f conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
#line 1851 "configure"
#include "confdefs.h"
$ac_declaration
int
main ()
{
exit (42);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:1863: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:1866: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:1869: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:1872: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
break
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
done
rm -f conftest*
if test -n "$ac_declaration"; then
echo '#ifdef __cplusplus' >>confdefs.h
echo $ac_declaration >>confdefs.h
echo '#endif' >>confdefs.h
fi
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test ".$with_cxx" = .yes; then
ac_ext=cc
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
if test -n "$ac_tool_prefix"; then
for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
echo "$as_me:1910: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CXX"; then
ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
echo "$as_me:1925: found $ac_dir/$ac_word" >&5
break
done
fi
fi
CXX=$ac_cv_prog_CXX
if test -n "$CXX"; then
echo "$as_me:1933: result: $CXX" >&5
echo "${ECHO_T}$CXX" >&6
else
echo "$as_me:1936: result: no" >&5
echo "${ECHO_T}no" >&6
fi
test -n "$CXX" && break
done
fi
if test -z "$CXX"; then
ac_ct_CXX=$CXX
for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo "$as_me:1949: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CXX"; then
ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_CXX="$ac_prog"
echo "$as_me:1964: found $ac_dir/$ac_word" >&5
break
done
fi
fi
ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
if test -n "$ac_ct_CXX"; then
echo "$as_me:1972: result: $ac_ct_CXX" >&5
echo "${ECHO_T}$ac_ct_CXX" >&6
else
echo "$as_me:1975: result: no" >&5
echo "${ECHO_T}no" >&6
fi
test -n "$ac_ct_CXX" && break
done
test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
CXX=$ac_ct_CXX
fi
# Provide some information about the compiler.
echo "$as_me:1987:" \
"checking for C++ compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:1990: \"$ac_compiler --version </dev/null >&5\"") >&5
(eval $ac_compiler --version </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:1993: \$? = $ac_status" >&5
(exit $ac_status); }
{ (eval echo "$as_me:1995: \"$ac_compiler -v </dev/null >&5\"") >&5
(eval $ac_compiler -v </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:1998: \$? = $ac_status" >&5
(exit $ac_status); }
{ (eval echo "$as_me:2000: \"$ac_compiler -V </dev/null >&5\"") >&5
(eval $ac_compiler -V </dev/null >&5) 2>&5
ac_status=$?
echo "$as_me:2003: \$? = $ac_status" >&5
(exit $ac_status); }
echo "$as_me:2006: checking whether we are using the GNU C++ compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line 2012 "configure"
#include "confdefs.h"
int
main ()
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2027: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2030: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2033: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2036: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
fi
echo "$as_me:2048: result: $ac_cv_cxx_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
GXX=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CXXFLAGS=${CXXFLAGS+set}
ac_save_CXXFLAGS=$CXXFLAGS
CXXFLAGS="-g"
echo "$as_me:2054: checking whether $CXX accepts -g" >&5
echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
if test "${ac_cv_prog_cxx_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line 2060 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2072: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2075: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2078: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2081: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_prog_cxx_g=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cxx_g=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:2091: result: $ac_cv_prog_cxx_g" >&5
echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
if test "$ac_test_CXXFLAGS" = set; then
CXXFLAGS=$ac_save_CXXFLAGS
elif test $ac_cv_prog_cxx_g = yes; then
if test "$GXX" = yes; then
CXXFLAGS="-g -O2"
else
CXXFLAGS="-g"
fi
else
if test "$GXX" = yes; then
CXXFLAGS="-O2"
else
CXXFLAGS=
fi
fi
for ac_declaration in \
''\
'#include <stdlib.h>' \
'extern "C" void std::exit (int) throw (); using std::exit;' \
'extern "C" void std::exit (int); using std::exit;' \
'extern "C" void exit (int) throw ();' \
'extern "C" void exit (int);' \
'void exit (int);'
do
cat >conftest.$ac_ext <<_ACEOF
#line 2118 "configure"
#include "confdefs.h"
#include <stdlib.h>
$ac_declaration
int
main ()
{
exit (42);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2131: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2134: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2137: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2140: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
:
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
continue
fi
rm -f conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
#line 2150 "configure"
#include "confdefs.h"
$ac_declaration
int
main ()
{
exit (42);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2162: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2165: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2168: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2171: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
break
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
done
rm -f conftest*
if test -n "$ac_declaration"; then
echo '#ifdef __cplusplus' >>confdefs.h
echo $ac_declaration >>confdefs.h
echo '#endif' >>confdefs.h
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
echo "$as_me:2199: checking how to run the C preprocessor" >&5
echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if test "${ac_cv_prog_CPP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# Double quotes because CPP needs to be expanded
for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
do
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
#line 2220 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax error
_ACEOF
if { (eval echo "$as_me:2225: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
egrep -v '^ *\+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:2231: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
else
ac_cpp_err=
fi
else
ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
:
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether non-existent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
#line 2254 "configure"
#include "confdefs.h"
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:2258: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
egrep -v '^ *\+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:2264: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
else
ac_cpp_err=
fi
else
ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
# Broken: success on invalid input.
continue
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
break
fi
done
ac_cv_prog_CPP=$CPP
fi
CPP=$ac_cv_prog_CPP
else
ac_cv_prog_CPP=$CPP
fi
echo "$as_me:2301: result: $CPP" >&5
echo "${ECHO_T}$CPP" >&6
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
#line 2311 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax error
_ACEOF
if { (eval echo "$as_me:2316: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
egrep -v '^ *\+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:2322: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
else
ac_cpp_err=
fi
else
ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
:
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether non-existent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
#line 2345 "configure"
#include "confdefs.h"
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:2349: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
egrep -v '^ *\+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:2355: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
else
ac_cpp_err=
fi
else
ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
# Broken: success on invalid input.
continue
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
:
else
{ { echo "$as_me:2383: error: C preprocessor \"$CPP\" fails sanity check" >&5
echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
{ (exit 1); exit 1; }; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
# Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
enableval="$enable_debug"
if test ".$ac_cv_c_compiler_gnu" = ".yes"; then
case "$CFLAGS" in
*-O* ) ;;
* ) CFLAGS="$CFLAGS -O2" ;;
esac
case "$CFLAGS" in
*-g* ) ;;
* ) CFLAGS="$CFLAGS -g" ;;
esac
case "$CFLAGS" in
*-pipe* ) ;;
* ) echo "$as_me:2408: checking whether compiler option(s) -pipe work" >&5
echo $ECHO_N "checking whether compiler option(s) -pipe work... $ECHO_C" >&6
if test "${ac_cv_compiler_option_pipe+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -pipe"
cat >conftest.$ac_ext <<_ACEOF
#line 2417 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2429: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2432: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2435: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2438: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_compiler_option_pipe=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_compiler_option_pipe=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$SAVE_CFLAGS"
fi
if test ".$ac_cv_compiler_option_pipe" = .yes; then
CFLAGS="$CFLAGS -pipe"
else
:
fi
echo "$as_me:2455: result: $ac_cv_compiler_option_pipe" >&5
echo "${ECHO_T}$ac_cv_compiler_option_pipe" >&6
;;
esac
echo "$as_me:2459: checking whether compiler option(s) -ggdb3 work" >&5
echo $ECHO_N "checking whether compiler option(s) -ggdb3 work... $ECHO_C" >&6
if test "${ac_cv_compiler_option_ggdb3+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -ggdb3"
cat >conftest.$ac_ext <<_ACEOF
#line 2468 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2480: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2483: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2486: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2489: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_compiler_option_ggdb3=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_compiler_option_ggdb3=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$SAVE_CFLAGS"
fi
if test ".$ac_cv_compiler_option_ggdb3" = .yes; then
CFLAGS="$CFLAGS -ggdb3"
else
:
fi
echo "$as_me:2506: result: $ac_cv_compiler_option_ggdb3" >&5
echo "${ECHO_T}$ac_cv_compiler_option_ggdb3" >&6
CFLAGS="$CFLAGS -pedantic"
CFLAGS="$CFLAGS -Wall"
WMORE="-Wshadow -Wpointer-arith -Wcast-align -Winline"
WMORE="$WMORE -Wmissing-prototypes -Wmissing-declarations -Wnested-externs"
echo "$as_me:2513: checking whether compiler option(s) -W<xxx> work" >&5
echo $ECHO_N "checking whether compiler option(s) -W<xxx> work... $ECHO_C" >&6
if test "${ac_cv_compiler_option_wmore+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $WMORE"
cat >conftest.$ac_ext <<_ACEOF
#line 2522 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2534: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2537: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2540: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2543: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_compiler_option_wmore=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_compiler_option_wmore=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$SAVE_CFLAGS"
fi
if test ".$ac_cv_compiler_option_wmore" = .yes; then
CFLAGS="$CFLAGS $WMORE"
else
:
fi
echo "$as_me:2560: result: $ac_cv_compiler_option_wmore" >&5
echo "${ECHO_T}$ac_cv_compiler_option_wmore" >&6
echo "$as_me:2563: checking whether compiler option(s) -Wno-long-long work" >&5
echo $ECHO_N "checking whether compiler option(s) -Wno-long-long work... $ECHO_C" >&6
if test "${ac_cv_compiler_option_wnolonglong+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -Wno-long-long"
cat >conftest.$ac_ext <<_ACEOF
#line 2572 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2584: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2587: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2590: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2593: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_compiler_option_wnolonglong=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_compiler_option_wnolonglong=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$SAVE_CFLAGS"
fi
if test ".$ac_cv_compiler_option_wnolonglong" = .yes; then
CFLAGS="$CFLAGS -Wno-long-long"
else
:
fi
echo "$as_me:2610: result: $ac_cv_compiler_option_wnolonglong" >&5
echo "${ECHO_T}$ac_cv_compiler_option_wnolonglong" >&6
else
case "$CFLAGS" in
*-g* ) ;;
* ) CFLAGS="$CFLAGS -g" ;;
esac
fi
msg="enabled"
else
if test ".$ac_cv_c_compiler_gnu" = ".yes"; then
case "$CFLAGS" in
*-pipe* ) ;;
* ) echo "$as_me:2626: checking whether compiler option(s) -pipe work" >&5
echo $ECHO_N "checking whether compiler option(s) -pipe work... $ECHO_C" >&6
if test "${ac_cv_compiler_option_pipe+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -pipe"
cat >conftest.$ac_ext <<_ACEOF
#line 2635 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:2647: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:2650: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:2653: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:2656: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_compiler_option_pipe=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_compiler_option_pipe=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$SAVE_CFLAGS"
fi
if test ".$ac_cv_compiler_option_pipe" = .yes; then
CFLAGS="$CFLAGS -pipe"
else
:
fi
echo "$as_me:2673: result: $ac_cv_compiler_option_pipe" >&5
echo "${ECHO_T}$ac_cv_compiler_option_pipe" >&6
;;
esac
fi
case "$CFLAGS" in
*-g* ) CFLAGS=`echo "$CFLAGS" |\
sed -e 's/ -g / /g' -e 's/ -g$//' -e 's/^-g //g' -e 's/^-g$//'` ;;
esac
case "$CXXFLAGS" in
*-g* ) CXXFLAGS=`echo "$CXXFLAGS" |\
sed -e 's/ -g / /g' -e 's/ -g$//' -e 's/^-g //g' -e 's/^-g$//'` ;;
esac
msg=disabled
fi; echo "$as_me:2688: checking for compilation debug mode" >&5
echo $ECHO_N "checking for compilation debug mode... $ECHO_C" >&6
echo "$as_me:2690: result: $msg" >&5
echo "${ECHO_T}$msg" >&6
if test ".$msg" = .enabled; then
enable_shared=no
fi
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_shared=yes
fi;
# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_static=yes
fi;
# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
enableval="$enable_fast_install"
p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac
else
enable_fast_install=yes
fi;
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
elif test -f $ac_dir/shtool; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ { echo "$as_me:2779: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
{ (exit 1); exit 1; }; }
fi
ac_config_guess="$SHELL $ac_aux_dir/config.guess"
ac_config_sub="$SHELL $ac_aux_dir/config.sub"
ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:2789: error: cannot run $ac_config_sub" >&5
echo "$as_me: error: cannot run $ac_config_sub" >&2;}
{ (exit 1); exit 1; }; }
echo "$as_me:2793: checking build system type" >&5
echo $ECHO_N "checking build system type... $ECHO_C" >&6
if test "${ac_cv_build+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_build_alias=$build_alias
test -z "$ac_cv_build_alias" &&
ac_cv_build_alias=`$ac_config_guess`
test -z "$ac_cv_build_alias" &&
{ { echo "$as_me:2802: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
{ (exit 1); exit 1; }; }
ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
{ { echo "$as_me:2806: error: $ac_config_sub $ac_cv_build_alias failed." >&5
echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed." >&2;}
{ (exit 1); exit 1; }; }
fi
echo "$as_me:2811: result: $ac_cv_build" >&5
echo "${ECHO_T}$ac_cv_build" >&6
build=$ac_cv_build
build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$as_me:2818: checking host system type" >&5
echo $ECHO_N "checking host system type... $ECHO_C" >&6
if test "${ac_cv_host+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_host_alias=$host_alias
test -z "$ac_cv_host_alias" &&
ac_cv_host_alias=$ac_cv_build_alias
ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
{ { echo "$as_me:2827: error: $ac_config_sub $ac_cv_host_alias failed" >&5
echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
echo "$as_me:2832: result: $ac_cv_host" >&5
echo "${ECHO_T}$ac_cv_host" >&6
host=$ac_cv_host
host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld"
test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi;
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo "$as_me:2849: checking for ld used by GCC" >&5
echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
echo "$as_me:2879: checking for GNU ld" >&5
echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
else
echo "$as_me:2882: checking for non-GNU ld" >&5
echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
fi
if test "${lt_cv_path_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
LD="$lt_cv_path_LD"
if test -n "$LD"; then
echo "$as_me:2912: result: $LD" >&5
echo "${ECHO_T}$LD" >&6
else
echo "$as_me:2915: result: no" >&5
echo "${ECHO_T}no" >&6
fi
test -z "$LD" && { { echo "$as_me:2918: error: no acceptable ld found in \$PATH" >&5
echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
{ (exit 1); exit 1; }; }
echo "$as_me:2921: checking if the linker ($LD) is GNU ld" >&5
echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
lt_cv_prog_gnu_ld=yes
else
lt_cv_prog_gnu_ld=no
fi
fi
echo "$as_me:2933: result: $lt_cv_prog_gnu_ld" >&5
echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
with_gnu_ld=$lt_cv_prog_gnu_ld
echo "$as_me:2937: checking for $LD option to reload object files" >&5
echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
if test "${lt_cv_ld_reload_flag+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_ld_reload_flag='-r'
fi
echo "$as_me:2944: result: $lt_cv_ld_reload_flag" >&5
echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo "$as_me:2949: checking for BSD-compatible nm" >&5
echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
if test "${lt_cv_path_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
tmp_nm=$ac_dir/${ac_tool_prefix}nm
if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
lt_cv_path_NM="$tmp_nm -B"
break
elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
lt_cv_path_NM="$tmp_nm -p"
break
else
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi
NM="$lt_cv_path_NM"
echo "$as_me:2985: result: $NM" >&5
echo "${ECHO_T}$NM" >&6
echo "$as_me:2988: checking whether ln -s works" >&5
echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
echo "$as_me:2992: result: yes" >&5
echo "${ECHO_T}yes" >&6
else
echo "$as_me:2995: result: no, using $LN_S" >&5
echo "${ECHO_T}no, using $LN_S" >&6
fi
echo "$as_me:2999: checking how to recognise dependant libraries" >&5
echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
if test "${lt_cv_deplibs_check_method+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# ['file_magic [regex]'] -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.
case $host_os in
aix4* | aix5*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi4*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin* | mingw* | pw32*)
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
darwin* | rhapsody*)
lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
lt_cv_file_magic_cmd='/usr/bin/file -L'
case "$host_os" in
rhapsody* | darwin1.012)
lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
;;
*) # Darwin 1.3 on
lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
;;
esac
;;
freebsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
gnu*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20*|hpux11*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
irix5* | irix6*)
case $host_os in
irix5*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
;;
*)
case $LD in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
;;
esac
lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
lt_cv_deplibs_check_method=pass_all
;;
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
alpha* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
esac
lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
fi
;;
newos6*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
osf3* | osf4* | osf5*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
lt_cv_file_magic_test_file=/shlib/libc.so
lt_cv_deplibs_check_method=pass_all
;;
sco3.2v5*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_test_file=/lib/libc.so
;;
sysv5uw[78]* | sysv4*uw2*)
lt_cv_deplibs_check_method=pass_all
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
ncr)
lt_cv_deplibs_check_method=pass_all
;;
sequent)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
;;
sni)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
lt_cv_file_magic_test_file=/lib/libc.so
;;
esac
;;
esac
fi
echo "$as_me:3167: result: $lt_cv_deplibs_check_method" >&5
echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
# Check for command to grab the raw symbol name followed by C symbol from nm.
echo "$as_me:3173: checking command to parse $NM output" >&5
echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix. What could be older than Ultrix?!! ;)]
# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'
# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'
# Transform an extracted symbol line into a proper C declaration
lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
# Define system-specific variables.
case $host_os in
aix*)
symcode='[BCDT]'
;;
cygwin* | mingw* | pw32*)
symcode='[ABCDGISTW]'
;;
hpux*) # Its linker distinguishes data from code symbols
lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
;;
irix*)
symcode='[BCDEGRST]'
;;
solaris* | sysv5*)
symcode='[BDT]'
;;
sysv4)
symcode='[DFNSTU]'
;;
esac
# Handle CRLF in mingw tool chain
opt_cr=
case $host_os in
mingw*)
opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
symcode='[ABCDGISTW]'
fi
# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do
# Write the raw and C identifiers.
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF
if { (eval echo "$as_me:3250: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:3253: \$? = $ac_status" >&5
(exit $ac_status); }; then
# Now try to grab the symbols.
nlist=conftest.nm
if { (eval echo "$as_me:3257: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
(eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
ac_status=$?
echo "$as_me:3260: \$? = $ac_status" >&5
(exit $ac_status); } && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
else
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if egrep ' nm_test_var$' "$nlist" >/dev/null; then
if egrep ' nm_test_func$' "$nlist" >/dev/null; then
cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif
EOF
# Now generate the symbol file.
eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif
/* The mapping between symbol names and symbols. */
const struct {
const char *name;
lt_ptr_t address;
}
lt_preloaded_symbols[] =
{
EOF
sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
cat <<\EOF >> conftest.$ac_ext
{0, (lt_ptr_t) 0}
};
#ifdef __cplusplus
}
#endif
EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
save_LIBS="$LIBS"
save_CFLAGS="$CFLAGS"
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$no_builtin_flag"
if { (eval echo "$as_me:3312: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:3315: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest; then
pipe_works=yes
fi
LIBS="$save_LIBS"
CFLAGS="$save_CFLAGS"
else
echo "cannot find nm_test_func in $nlist" >&5
fi
else
echo "cannot find nm_test_var in $nlist" >&5
fi
else
echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
fi
else
echo "$progname: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test "$pipe_works" = yes; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
fi
global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
if test -z "$lt_cv_sys_global_symbol_pipe"; then
global_symbol_to_cdecl=
else
global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
fi
if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
echo "$as_me:3353: result: failed" >&5
echo "${ECHO_T}failed" >&6
else
echo "$as_me:3356: result: ok" >&5
echo "${ECHO_T}ok" >&6
fi
for ac_header in dlfcn.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
echo "$as_me:3363: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
if eval "test \"\${$as_ac_Header+set}\" = set"; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line 3369 "configure"
#include "confdefs.h"
#include <$ac_header>
_ACEOF
if { (eval echo "$as_me:3373: \"$ac_cpp conftest.$ac_ext\"") >&5
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
ac_status=$?
egrep -v '^ *\+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:3379: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null; then
if test -s conftest.err; then
ac_cpp_err=$ac_c_preproc_warn_flag
else
ac_cpp_err=
fi
else
ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
eval "$as_ac_Header=no"
fi
rm -f conftest.err conftest.$ac_ext
fi
echo "$as_me:3398: result: `eval echo '${'$as_ac_Header'}'`" >&5
echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<EOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
EOF
fi
done
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo "$as_me:3412: checking for ${ac_tool_prefix}file" >&5
echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
case $MAGIC_CMD in
/*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
?:/*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
;;
*)
ac_save_MAGIC_CMD="$MAGIC_CMD"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="/usr/bin:$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/${ac_tool_prefix}file; then
lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
egrep "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
EOF
fi ;;
esac
fi
break
fi
done
IFS="$ac_save_ifs"
MAGIC_CMD="$ac_save_MAGIC_CMD"
;;
esac
fi
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
echo "$as_me:3467: result: $MAGIC_CMD" >&5
echo "${ECHO_T}$MAGIC_CMD" >&6
else
echo "$as_me:3470: result: no" >&5
echo "${ECHO_T}no" >&6
fi
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo "$as_me:3476: checking for file" >&5
echo $ECHO_N "checking for file... $ECHO_C" >&6
if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
case $MAGIC_CMD in
/*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
?:/*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
;;
*)
ac_save_MAGIC_CMD="$MAGIC_CMD"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="/usr/bin:$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/file; then
lt_cv_path_MAGIC_CMD="$ac_dir/file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
egrep "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
EOF
fi ;;
esac
fi
break
fi
done
IFS="$ac_save_ifs"
MAGIC_CMD="$ac_save_MAGIC_CMD"
;;
esac
fi
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
echo "$as_me:3531: result: $MAGIC_CMD" >&5
echo "${ECHO_T}$MAGIC_CMD" >&6
else
echo "$as_me:3534: result: no" >&5
echo "${ECHO_T}no" >&6
fi
else
MAGIC_CMD=:
fi
fi
fi
;;
esac
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo "$as_me:3550: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
echo "$as_me:3565: found $ac_dir/$ac_word" >&5
break
done
fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
echo "$as_me:3573: result: $RANLIB" >&5
echo "${ECHO_T}$RANLIB" >&6
else
echo "$as_me:3576: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
if test -z "$ac_cv_prog_RANLIB"; then
ac_ct_RANLIB=$RANLIB
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo "$as_me:3585: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_RANLIB"; then
ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_RANLIB="ranlib"
echo "$as_me:3600: found $ac_dir/$ac_word" >&5
break
done
test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
echo "$as_me:3609: result: $ac_ct_RANLIB" >&5
echo "${ECHO_T}$ac_ct_RANLIB" >&6
else
echo "$as_me:3612: result: no" >&5
echo "${ECHO_T}no" >&6
fi
RANLIB=$ac_ct_RANLIB
else
RANLIB="$ac_cv_prog_RANLIB"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo "$as_me:3624: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
echo "$as_me:3639: found $ac_dir/$ac_word" >&5
break
done
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
echo "$as_me:3647: result: $STRIP" >&5
echo "${ECHO_T}$STRIP" >&6
else
echo "$as_me:3650: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo "$as_me:3659: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_STRIP"; then
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
ac_save_IFS=$IFS; IFS=$ac_path_separator
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
IFS=$ac_save_IFS
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_ac_ct_STRIP="strip"
echo "$as_me:3674: found $ac_dir/$ac_word" >&5
break
done
test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
echo "$as_me:3683: result: $ac_ct_STRIP" >&5
echo "${ECHO_T}$ac_ct_STRIP" >&6
else
echo "$as_me:3686: result: no" >&5
echo "${ECHO_T}no" >&6
fi
STRIP=$ac_ct_STRIP
else
STRIP="$ac_cv_prog_STRIP"
fi
enable_dlopen=no
enable_win32_dll=no
# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
enableval="$enable_libtool_lock"
fi;
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
*-*-irix6*)
# Find out which ABI we are using.
echo '#line 3710 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:3711: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:3714: \$? = $ac_status" >&5
(exit $ac_status); }; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo "$as_me:3735: checking whether the C compiler needs -belf" >&5
echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
if test "${lt_cv_cc_needs_belf+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
cat >conftest.$ac_ext <<_ACEOF
#line 3748 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:3760: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:3763: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:3766: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:3769: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
lt_cv_cc_needs_belf=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
lt_cv_cc_needs_belf=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
echo "$as_me:3785: result: $lt_cv_cc_needs_belf" >&5
echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
esac
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Constants:
rm="rm -f"
# Global variables:
default_ofile=libtool
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"
need_locks="$enable_libtool_lock"
old_CC="$CC"
old_CFLAGS="$CFLAGS"
# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o
if test x"$host" != x"$build"; then
ac_tool_prefix=${host_alias}-
else
ac_tool_prefix=
fi
# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case $host_os in
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
fi
# Allow CC to be a program name with arguments.
set dummy $CC
compiler="$2"
## FIXME: this should be a separate macro
##
echo "$as_me:3880: checking for objdir" >&5
echo $ECHO_N "checking for objdir... $ECHO_C" >&6
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
objdir=.libs
else
# MS-DOS does not allow filenames that begin with a dot.
objdir=_libs
fi
rmdir .libs 2>/dev/null
echo "$as_me:3891: result: $objdir" >&5
echo "${ECHO_T}$objdir" >&6
##
## END FIXME
## FIXME: this should be a separate macro
##
# Check whether --with-pic or --without-pic was given.
if test "${with_pic+set}" = set; then
withval="$with_pic"
pic_mode="$withval"
else
pic_mode=default
fi;
test -z "$pic_mode" && pic_mode=default
# We assume here that the value for lt_cv_prog_cc_pic will not be cached
# in isolation, and that seeing it set (from the cache) indicates that
# the associated values are set (in the cache) correctly too.
echo "$as_me:3911: checking for $compiler option to produce PIC" >&5
echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
if test "${lt_cv_prog_cc_pic+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_cc_pic=
lt_cv_prog_cc_shlib=
lt_cv_prog_cc_wl=
lt_cv_prog_cc_static=
lt_cv_prog_cc_no_builtin=
lt_cv_prog_cc_can_build_shared=$can_build_shared
if test "$GCC" = yes; then
lt_cv_prog_cc_wl='-Wl,'
lt_cv_prog_cc_static='-static'
case $host_os in
aix*)
# Below there is a dirty hack to force normal static linking with -ldl
# The problem is because libdl dynamically linked with both libc and
# libC (AIX C++ library), which obviously doesn't included in libraries
# list by gcc. This cause undefined symbols with -static flags.
# This hack allows C programs to be linked with "-static -ldl", but
# we not sure about C++ programs.
lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
;;
amigaos*)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the `-m68020' flag to GCC prevents building anything better,
# like `-m68040'.
lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
;;
beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
lt_cv_prog_cc_pic='-fno-common'
;;
cygwin* | mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_cv_prog_cc_pic='-DDLL_EXPORT'
;;
sysv4*MP*)
if test -d /usr/nec; then
lt_cv_prog_cc_pic=-Kconform_pic
fi
;;
*)
lt_cv_prog_cc_pic='-fPIC'
;;
esac
else
# PORTME Check for PIC flags for the system compiler.
case $host_os in
aix3* | aix4* | aix5*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_cv_prog_cc_static='-Bstatic'
lt_cv_prog_cc_wl='-Wl,'
else
lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
hpux9* | hpux10* | hpux11*)
# Is there a better lt_cv_prog_cc_static that works with the bundled CC?
lt_cv_prog_cc_wl='-Wl,'
lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
lt_cv_prog_cc_pic='+Z'
;;
irix5* | irix6*)
lt_cv_prog_cc_wl='-Wl,'
lt_cv_prog_cc_static='-non_shared'
# PIC (with -KPIC) is the default.
;;
cygwin* | mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_cv_prog_cc_pic='-DDLL_EXPORT'
;;
newsos6)
lt_cv_prog_cc_pic='-KPIC'
lt_cv_prog_cc_static='-Bstatic'
;;
osf3* | osf4* | osf5*)
# All OSF/1 code is PIC.
lt_cv_prog_cc_wl='-Wl,'
lt_cv_prog_cc_static='-non_shared'
;;
sco3.2v5*)
lt_cv_prog_cc_pic='-Kpic'
lt_cv_prog_cc_static='-dn'
lt_cv_prog_cc_shlib='-belf'
;;
solaris*)
lt_cv_prog_cc_pic='-KPIC'
lt_cv_prog_cc_static='-Bstatic'
lt_cv_prog_cc_wl='-Wl,'
;;
sunos4*)
lt_cv_prog_cc_pic='-PIC'
lt_cv_prog_cc_static='-Bstatic'
lt_cv_prog_cc_wl='-Qoption ld '
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
lt_cv_prog_cc_pic='-KPIC'
lt_cv_prog_cc_static='-Bstatic'
if test "x$host_vendor" = xsni; then
lt_cv_prog_cc_wl='-LD'
else
lt_cv_prog_cc_wl='-Wl,'
fi
;;
uts4*)
lt_cv_prog_cc_pic='-pic'
lt_cv_prog_cc_static='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
lt_cv_prog_cc_pic='-Kconform_pic'
lt_cv_prog_cc_static='-Bstatic'
fi
;;
*)
lt_cv_prog_cc_can_build_shared=no
;;
esac
fi
fi
if test -z "$lt_cv_prog_cc_pic"; then
echo "$as_me:4058: result: none" >&5
echo "${ECHO_T}none" >&6
else
echo "$as_me:4061: result: $lt_cv_prog_cc_pic" >&5
echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6
# Check to make sure the pic_flag actually works.
echo "$as_me:4065: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
if test "${lt_cv_prog_cc_pic_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
cat >conftest.$ac_ext <<_ACEOF
#line 4073 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:4085: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:4088: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:4091: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:4094: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
case $host_os in
hpux9* | hpux10* | hpux11*)
# On HP-UX, both CC and GCC only warn that PIC is supported... then
# they create non-PIC objects. So, if there were any warnings, we
# assume that PIC is not supported.
if test -s conftest.err; then
lt_cv_prog_cc_pic_works=no
else
lt_cv_prog_cc_pic_works=yes
fi
;;
*)
lt_cv_prog_cc_pic_works=yes
;;
esac
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
lt_cv_prog_cc_pic_works=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$save_CFLAGS"
fi
if test "X$lt_cv_prog_cc_pic_works" = Xno; then
lt_cv_prog_cc_pic=
lt_cv_prog_cc_can_build_shared=no
else
lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
fi
echo "$as_me:4130: result: $lt_cv_prog_cc_pic_works" >&5
echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
fi
##
## END FIXME
# Check for any special shared library compilation flags.
if test -n "$lt_cv_prog_cc_shlib"; then
{ echo "$as_me:4138: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then :
else
{ echo "$as_me:4142: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
lt_cv_prog_cc_can_build_shared=no
fi
fi
## FIXME: this should be a separate macro
##
echo "$as_me:4150: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
if test "${lt_cv_prog_cc_static_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_cc_static_works=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
cat >conftest.$ac_ext <<_ACEOF
#line 4159 "configure"
#include "confdefs.h"
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:4171: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:4174: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:4177: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:4180: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
lt_cv_prog_cc_static_works=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LDFLAGS="$save_LDFLAGS"
fi
# Belt *and* braces to stop my trousers falling down:
test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
echo "$as_me:4194: result: $lt_cv_prog_cc_static_works" >&5
echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6
pic_flag="$lt_cv_prog_cc_pic"
special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
wl="$lt_cv_prog_cc_wl"
link_static_flag="$lt_cv_prog_cc_static"
no_builtin_flag="$lt_cv_prog_cc_no_builtin"
can_build_shared="$lt_cv_prog_cc_can_build_shared"
##
## END FIXME
## FIXME: this should be a separate macro
##
# Check to see if options -o and -c are simultaneously supported by compiler
echo "$as_me:4209: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
if test "${lt_cv_compiler_c_o+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
echo "int some_variable = 0;" > conftest.$ac_ext
mkdir out
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory. Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
compiler_c_o=no
if { (eval echo configure:4229: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s out/conftest.err; then
lt_cv_compiler_c_o=no
else
lt_cv_compiler_c_o=yes
fi
else
# Append any errors to the config.log.
cat out/conftest.err 1>&5
lt_cv_compiler_c_o=no
fi
CFLAGS="$save_CFLAGS"
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm -r conftest 2>/dev/null
fi
compiler_c_o=$lt_cv_compiler_c_o
echo "$as_me:4253: result: $compiler_c_o" >&5
echo "${ECHO_T}$compiler_c_o" >&6
if test x"$compiler_c_o" = x"yes"; then
# Check to see if we can write to a .lo
echo "$as_me:4258: checking if $compiler supports -c -o file.lo" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
if test "${lt_cv_compiler_o_lo+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_compiler_o_lo=no
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -c -o conftest.lo"
cat >conftest.$ac_ext <<_ACEOF
#line 4268 "configure"
#include "confdefs.h"
int
main ()
{
int some_variable = 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:4280: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:4283: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:4286: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:4289: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
lt_cv_compiler_o_lo=no
else
lt_cv_compiler_o_lo=yes
fi
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$save_CFLAGS"
fi
compiler_o_lo=$lt_cv_compiler_o_lo
echo "$as_me:4309: result: $compiler_c_lo" >&5
echo "${ECHO_T}$compiler_c_lo" >&6
else
compiler_o_lo=no
fi
##
## END FIXME
## FIXME: this should be a separate macro
##
# Check to see if we can do hard links to lock some files if needed
hard_links="nottested"
if test "$compiler_c_o" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
echo "$as_me:4323: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
hard_links=yes
$rm conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
echo "$as_me:4331: result: $hard_links" >&5
echo "${ECHO_T}$hard_links" >&6
if test "$hard_links" = no; then
{ echo "$as_me:4334: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
need_locks=no
fi
##
## END FIXME
## FIXME: this should be a separate macro
##
if test "$GCC" = yes; then
# Check to see if options -fno-rtti -fno-exceptions are supported by compiler
echo "$as_me:4348: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
echo "int some_variable = 0;" > conftest.$ac_ext
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
compiler_rtti_exceptions=no
cat >conftest.$ac_ext <<_ACEOF
#line 4355 "configure"
#include "confdefs.h"
int
main ()
{
int some_variable = 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:4367: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:4370: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:4373: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:4376: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
compiler_rtti_exceptions=no
else
compiler_rtti_exceptions=yes
fi
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest.$ac_objext conftest.$ac_ext
CFLAGS="$save_CFLAGS"
echo "$as_me:4392: result: $compiler_rtti_exceptions" >&5
echo "${ECHO_T}$compiler_rtti_exceptions" >&6
if test "$compiler_rtti_exceptions" = "yes"; then
no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
else
no_builtin_flag=' -fno-builtin'
fi
fi
##
## END FIXME
## FIXME: this should be a separate macro
##
# See if the linker supports building shared libraries.
echo "$as_me:4407: checking whether the linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6
allow_undefined_flag=
no_undefined_flag=
need_lib_prefix=unknown
need_version=unknown
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
archive_cmds=
archive_expsym_cmds=
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_into_libs=no
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
runpath_var=
link_all_deplibs=unknown
always_export_symbols=no
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an egrep regular expression of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32* )
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test "$GCC" != yes; then
with_gnu_ld=no
fi
;;
esac
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
# On AIX, the GNU linker is very broken
# Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
ld_shlibs=no
cat <<EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
EOF
;;
amigaos*)
archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
# Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
# that the semantics of dynamic libraries on AmigaOS, at least up
# to version 4, is to share data among multiple programs linked
# with the same dynamic library. Since this doesn't match the
# behavior of shared libraries on other platforms, we can use
# them.
ld_shlibs=no
;;
beos*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
;;
cygwin* | mingw* | pw32*)
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
allow_undefined_flag=unsupported
always_export_symbols=yes
extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
test -f $output_objdir/impgen.exe || (cd $output_objdir && \
if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
else $CC -o impgen impgen.c ; fi)~
$output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
# cygwin and mingw dlls have different entry points and sets of symbols
# to exclude.
# FIXME: what about values for MSVC?
dll_entry=__cygwin_dll_entry@12
dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
case $host_os in
mingw*)
# mingw values
dll_entry=_DllMainCRTStartup@12
dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
;;
esac
# mingw and cygwin differ, and it's simplest to just exclude the union
# of the two symbol sets.
dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
# recent cygwin and mingw systems supply a stub DllMain which the user
# can override, but on older systems we have to supply one (in ltdll.c)
if test "x$lt_cv_need_dllmain" = "xyes"; then
ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~
test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
else
ltdll_obj=
ltdll_cmds=
fi
# Extract the symbol export list from an `--export-all' def file,
# then regenerate the def file from the symbol export list, so that
# the compiled dll only exports the symbol export list.
# Be careful not to strip the DATA tag left be newer dlltools.
export_symbols_cmds="$ltdll_cmds"'
$DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is.
# If DATA tags from a recent dlltool are present, honour them!
archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname-def;
else
echo EXPORTS > $output_objdir/$soname-def;
_lt_hint=1;
cat $export_symbols | while read symbol; do
set dummy \$symbol;
case \$# in
2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
*) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
esac;
_lt_hint=`expr 1 + \$_lt_hint`;
done;
fi~
'"$ltdll_cmds"'
$CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
$CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
$CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris* | sysv5*)
if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
cat <<EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
EOF
elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
sunos4*)
archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
if test "$ld_shlibs" = yes; then
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec='${wl}--export-dynamic'
case $host_os in
cygwin* | mingw* | pw32*)
# dlltool doesn't understand --whole-archive et. al.
whole_archive_flag_spec=
;;
*)
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
whole_archive_flag_spec=
fi
;;
esac
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
allow_undefined_flag=unsupported
always_export_symbols=yes
archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
if test "$GCC" = yes && test -z "$link_static_flag"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
fi
;;
aix4* | aix5*)
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
archive_cmds=''
hardcode_libdir_separator=':'
if test "$GCC" = yes; then
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" && \
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct=yes
else
# We have old collect2
hardcode_direct=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
hardcode_minus_L=yes
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
shared_flag='-shared'
else
if test "$host_cpu" = ia64; then
shared_flag='-G'
else
shared_flag='${wl}-bM:SRE'
fi
hardcode_direct=yes
fi
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=""
else
# Test if we are trying to use run time linking, or normal AIX style linking.
# If -brtl is somewhere in LDFLAGS, we need to do run time linking.
aix_use_runtimelinking=no
for ld_flag in $LDFLAGS; do
if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
aix_use_runtimelinking=yes
break
fi
done
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# It seems that -bexpall can do strange things, so it is better to
# generate a list of symbols to export.
always_export_symbols=yes
if test "$aix_use_runtimelinking" = yes; then
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
allow_undefined_flag=' -Wl,-G'
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-znodefs"
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
# Warning - without using the other run time loading flags, -berok will
# link without error, but may produce a broken library.
allow_undefined_flag='${wl}-berok"
# This is a bit strange, but is similar to how AIX traditionally builds
# it's shared libraries.
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
fi
fi
;;
amigaos*)
archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
# see comment about different semantics on the GNU ld section
ld_shlibs=no
;;
cygwin* | mingw* | pw32*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec=' '
allow_undefined_flag=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
old_archive_from_new_cmds='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path='`cygpath -w "$srcfile"`'
;;
darwin* | rhapsody*)
allow_undefined_flag='-undefined suppress'
# FIXME: Relying on posixy $() will cause problems for
# cross-compilation, but unfortunately the echo tests do not
# yet detect zsh echo's removal of \ escapes.
archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
# We need to add '_' to the symbols in $export_symbols first
#archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
hardcode_direct=yes
hardcode_shlibpath_var=no
whole_archive_flag_spec='-all_load $convenience'
;;
freebsd1*)
ld_shlibs=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd*)
archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
hpux9* | hpux10* | hpux11*)
case $host_os in
hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
*) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
esac
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_minus_L=yes # Not in the search PATH, but as the default
# location of the library.
export_dynamic_flag_spec='${wl}-E'
;;
irix5* | irix6*)
if test "$GCC" = yes; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
fi
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
link_all_deplibs=yes
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
hardcode_direct=yes
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
openbsd*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
os2*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
fi
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
#Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
fi
hardcode_libdir_separator=:
;;
sco3.2v5*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
;;
solaris*)
no_undefined_flag=' -z defs'
# $CC -shared without GNU ld will not create a library from C++
# object files and a static libstdc++, better avoid it by now
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_shlibpath_var=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*) # Supported since Solaris 2.6 (maybe 2.5.1?)
whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
esac
link_all_deplibs=yes
;;
sunos4*)
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
sysv4)
if test "x$host_vendor" = xsno; then
archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
hardcode_direct=yes # is this really true???
else
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=no #Motorola manual says yes, but my tests say they lie
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
;;
sysv4.3*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
export_dynamic_flag_spec='-Bexport'
;;
sysv5*)
no_undefined_flag=' -z text'
# $CC -shared without GNU ld will not create a library from C++
# object files and a static libstdc++, better avoid it by now
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
hardcode_libdir_flag_spec=
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
;;
uts4*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
dgux*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
sysv4*MP*)
if test -d /usr/nec; then
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
ld_shlibs=yes
fi
;;
sysv4.2uw2*)
archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=no
hardcode_shlibpath_var=no
hardcode_runpath_var=yes
runpath_var=LD_RUN_PATH
;;
sysv5uw7* | unixware7*)
no_undefined_flag='${wl}-z ${wl}text'
if test "$GCC" = yes; then
archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
;;
*)
ld_shlibs=no
;;
esac
fi
echo "$as_me:5019: result: $ld_shlibs" >&5
echo "${ECHO_T}$ld_shlibs" >&6
test "$ld_shlibs" = no && can_build_shared=no
##
## END FIXME
## FIXME: this should be a separate macro
##
# Check hardcoding attributes.
echo "$as_me:5028: checking how to hardcode library paths into programs" >&5
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
test -n "$runpath_var"; then
# We can hardcode non-existant directories.
if test "$hardcode_direct" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test "$hardcode_shlibpath_var" != no &&
test "$hardcode_minus_L" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
hardcode_action=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
hardcode_action=unsupported
fi
echo "$as_me:5052: result: $hardcode_action" >&5
echo "${ECHO_T}$hardcode_action" >&6
##
## END FIXME
## FIXME: this should be a separate macro
##
striplib=
old_striplib=
echo "$as_me:5061: checking whether stripping libraries is possible" >&5
echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
echo "$as_me:5066: result: yes" >&5
echo "${ECHO_T}yes" >&6
else
echo "$as_me:5069: result: no" >&5
echo "${ECHO_T}no" >&6
fi
##
## END FIXME
reload_cmds='$LD$reload_flag -o $output$reload_objs'
test -z "$deplibs_check_method" && deplibs_check_method=unknown
## FIXME: this should be a separate macro
##
# PORTME Fill in your ld.so characteristics
echo "$as_me:5081: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
library_names_spec=
libname_spec='lib$name'
soname_spec=
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
case $host_os in
aix3*)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX has no versioning support, so we append a major version to the name.
soname_spec='${libname}${release}.so$major'
;;
aix4* | aix5*)
version_type=linux
if test "$host_cpu" = ia64; then
# AIX 5 supports IA64
library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line `#! .'. This would cause the generated library to
# depend on `.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# AIX (on Power*) has no versioning support, so currently we can not hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
if test "$aix_use_runtimelinking" = yes; then
# If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
# lib<name>.a to let people know that these are not typical AIX shared libraries.
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
else
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='${libname}${release}.a $libname.a'
soname_spec='${libname}${release}.so$major'
fi
shlibpath_var=LIBPATH
deplibs_check_method=pass_all
fi
;;
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
;;
beos*)
library_names_spec='${libname}.so'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi4*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
export_dynamic_flag_spec=-rdynamic
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32*)
version_type=windows
need_version=no
need_lib_prefix=no
case $GCC,$host_os in
yes,cygwin*)
library_names_spec='$libname.dll.a'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog .libs/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
;;
yes,mingw*)
library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
;;
yes,pw32*)
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
;;
*)
library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
;;
esac
dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
# FIXME: Relying on posixy $() will cause problems for
# cross-compilation, but unfortunately the echo tests do not
# yet detect zsh echo's removal of \ escapes.
library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
;;
freebsd1*)
dynamic_linker=no
;;
freebsd*)
objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2*)
shlibpath_overrides_runpath=yes
;;
*)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
esac
;;
gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
dynamic_linker="$host_os dld.sl"
version_type=sunos
need_lib_prefix=no
need_version=no
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
soname_spec='${libname}${release}.sl$major'
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
;;
irix5* | irix6*)
version_type=irix
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}.so$major'
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
case $host_os in
irix5*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
;;
# No shared lib support for Linux oldld, aout, or coff.
linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
dynamic_linker=no
;;
# This must be Linux ELF.
linux-gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
soname_spec='${libname}${release}.so$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
openbsd*)
version_type=sunos
if test "$with_gnu_ld" = yes; then
need_lib_prefix=no
need_version=no
fi
library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
;;
os2*)
libname_spec='$name'
need_lib_prefix=no
library_names_spec='$libname.dll $libname.a'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=LIBPATH
;;
osf3* | osf4* | osf5*)
version_type=osf
need_version=no
soname_spec='${libname}${release}.so'
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
sco3.2v5*)
version_type=osf
soname_spec='${libname}${release}.so$major'
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
shlibpath_var=LD_LIBRARY_PATH
;;
solaris*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test "$with_gnu_ld" = yes; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
uts4*)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
;;
dgux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
;;
sysv4*MP*)
if test -d /usr/nec ;then
version_type=linux
library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
soname_spec='$libname.so.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
*)
dynamic_linker=no
;;
esac
echo "$as_me:5463: result: $dynamic_linker" >&5
echo "${ECHO_T}$dynamic_linker" >&6
test "$dynamic_linker" = no && can_build_shared=no
##
## END FIXME
## FIXME: this should be a separate macro
##
# Report the final consequences.
echo "$as_me:5472: checking if libtool supports shared libraries" >&5
echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
echo "$as_me:5474: result: $can_build_shared" >&5
echo "${ECHO_T}$can_build_shared" >&6
##
## END FIXME
if test "$hardcode_action" = relink; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
test "$enable_shared" = no; then
# Fast installation is not necessary
enable_fast_install=needless
fi
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen="load_add_on"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
cygwin* | mingw* | pw32*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
;;
*)
echo "$as_me:5514: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 5522 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
int
main ()
{
dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5541: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:5544: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:5547: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:5550: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:5561: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
if test $ac_cv_lib_dl_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
echo "$as_me:5566: checking for dlopen" >&5
echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
if test "${ac_cv_func_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line 5572 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dlopen (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
char (*f) ();
int
main ()
{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
f = dlopen;
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5603: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:5606: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:5609: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:5612: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_func_dlopen=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_func_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:5622: result: $ac_cv_func_dlopen" >&5
echo "${ECHO_T}$ac_cv_func_dlopen" >&6
if test $ac_cv_func_dlopen = yes; then
lt_cv_dlopen="dlopen"
else
echo "$as_me:5627: checking for shl_load" >&5
echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
if test "${ac_cv_func_shl_load+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#line 5633 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shl_load (); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shl_load ();
char (*f) ();
int
main ()
{
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_shl_load) || defined (__stub___shl_load)
choke me
#else
f = shl_load;
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5664: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:5667: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:5670: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:5673: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_func_shl_load=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_func_shl_load=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:5683: result: $ac_cv_func_shl_load" >&5
echo "${ECHO_T}$ac_cv_func_shl_load" >&6
if test $ac_cv_func_shl_load = yes; then
lt_cv_dlopen="shl_load"
else
echo "$as_me:5688: checking for dlopen in -lsvld" >&5
echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
if test "${ac_cv_lib_svld_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 5696 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char dlopen ();
int
main ()
{
dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5715: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:5718: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:5721: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:5724: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_lib_svld_dlopen=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_svld_dlopen=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:5735: result: $ac_cv_lib_svld_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
if test $ac_cv_lib_svld_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
echo "$as_me:5740: checking for shl_load in -ldld" >&5
echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
if test "${ac_cv_lib_dld_shl_load+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
#line 5748 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shl_load ();
int
main ()
{
shl_load ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:5767: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:5770: \$? = $ac_status" >&5
(exit $ac_status); } &&
{ ac_try='test -s conftest$ac_exeext'
{ (eval echo "$as_me:5773: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:5776: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_lib_dld_shl_load=yes
else
echo "$as_me: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_lib_dld_shl_load=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
echo "$as_me:5787: result: $ac_cv_lib_dld_shl_load" >&5
echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
if test $ac_cv_lib_dld_shl_load = yes; then
lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
fi
fi
fi
fi
fi
;;
esac
if test "x$lt_cv_dlopen" != xno; then
enable_dlopen=yes
else
enable_dlopen=no
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS="$CPPFLAGS"
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
echo "$as_me:5821: checking whether a program can dlopen itself" >&5
echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
if test "${lt_cv_dlopen_self+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 5832 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}
EOF
if { (eval echo "$as_me:5893: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:5896: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self=no
fi
fi
rm -fr conftest*
fi
echo "$as_me:5913: result: $lt_cv_dlopen_self" >&5
echo "${ECHO_T}$lt_cv_dlopen_self" >&6
if test "x$lt_cv_dlopen_self" = xyes; then
LDFLAGS="$LDFLAGS $link_static_flag"
echo "$as_me:5918: checking whether a statically linked program can dlopen itself" >&5
echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
if test "${lt_cv_dlopen_self_static+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 5929 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}
EOF
if { (eval echo "$as_me:5990: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:5993: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self_static=no
fi
fi
rm -fr conftest*
fi
echo "$as_me:6010: result: $lt_cv_dlopen_self_static" >&5
echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
fi
CPPFLAGS="$save_CPPFLAGS"
LDFLAGS="$save_LDFLAGS"
LIBS="$save_LIBS"
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
## FIXME: this should be a separate macro
##
if test "$enable_shared" = yes && test "$GCC" = yes; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
echo "$as_me:6042: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
$rm conftest*
echo 'static int dummy;' > conftest.$ac_ext
if { (eval echo "$as_me:6050: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:6053: \$? = $ac_status" >&5
(exit $ac_status); }; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$lt_cv_prog_cc_wl
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
save_allow_undefined_flag=$allow_undefined_flag
allow_undefined_flag=
if { (eval echo "$as_me:6067: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
(eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
echo "$as_me:6070: \$? = $ac_status" >&5
(exit $ac_status); }
then
lt_cv_archive_cmds_need_lc=no
else
lt_cv_archive_cmds_need_lc=yes
fi
allow_undefined_flag=$save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
fi
echo "$as_me:6083: result: $lt_cv_archive_cmds_need_lc" >&5
echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
;;
esac
fi
need_lc=${lt_cv_archive_cmds_need_lc-yes}
##
## END FIXME
## FIXME: this should be a separate macro
##
# The second clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
:
else
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
test -f Makefile && make "$ltmain"
fi
if test -f "$ltmain"; then
trap "$rm \"${ofile}T\"; exit 1" 1 2 15
$rm -f "${ofile}T"
echo creating $ofile
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
for var in echo old_CC old_CFLAGS \
AR AR_FLAGS CC LD LN_S NM SHELL \
reload_flag reload_cmds wl \
pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
thread_safe_flag_spec whole_archive_flag_spec libname_spec \
library_names_spec soname_spec \
RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
old_striplib striplib file_magic_cmd export_symbols_cmds \
deplibs_check_method allow_undefined_flag no_undefined_flag \
finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
hardcode_libdir_flag_spec hardcode_libdir_separator \
sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
case $var in
reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
old_postinstall_cmds | old_postuninstall_cmds | \
export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
postinstall_cmds | postuninstall_cmds | \
finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
# Double-quote double-evaled strings.
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
;;
esac
done
cat <<__EOF__ > "${ofile}T"
#! $SHELL
# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996-2000 Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="sed -e s/^X//"
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
# ### BEGIN LIBTOOL CONFIG
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$need_lc
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# The host system.
host_alias=$host_alias
host=$host
# An echo program that does not interpret backslashes.
echo=$lt_echo
# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS
# The default C compiler.
CC=$lt_CC
# Is the compiler the GNU C compiler?
with_gcc=$GCC
# The linker used to build libraries.
LD=$lt_LD
# Whether we need hard or soft links.
LN_S=$lt_LN_S
# A BSD-compatible nm program.
NM=$lt_NM
# A symbol stripping program
STRIP=$STRIP
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"
# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"
# Used on cygwin: assembler.
AS="$AS"
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# How to pass a linker flag through the compiler.
wl=$lt_wl
# Object file suffix (normally "o").
objext="$ac_objext"
# Old archive suffix (normally "a").
libext="$libext"
# Executable file suffix (normally "").
exeext="$exeext"
# Additional compiler flags for building library objects.
pic_flag=$lt_pic_flag
pic_mode=$pic_mode
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_compiler_c_o
# Can we write directly to a .lo ?
compiler_o_lo=$lt_compiler_o_lo
# Must we lock files when doing compilation ?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_link_static_flag
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_no_builtin_flag
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec
# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec
# Library versioning type.
version_type=$version_type
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag
# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_global_symbol_pipe
# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
# This is the shared library runtime path variable.
runpath_var=$runpath_var
# This is the shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L
# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var
# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms
# ### END LIBTOOL CONFIG
__EOF__
case $host_os in
aix3*)
cat <<\EOF >> "${ofile}T"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
EOF
;;
esac
case $host_os in
cygwin* | mingw* | pw32* | os2*)
cat <<'EOF' >> "${ofile}T"
# This is a source program that is used to create dlls on Windows
# Don't remove nor modify the starting and closing comments
# /* ltdll.c starts here */
# #define WIN32_LEAN_AND_MEAN
# #include <windows.h>
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
# #ifndef __CYGWIN__
# # ifdef __CYGWIN32__
# # define __CYGWIN__ __CYGWIN32__
# # endif
# #endif
#
# #ifdef __cplusplus
# extern "C" {
# #endif
# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
# #ifdef __cplusplus
# }
# #endif
#
# #ifdef __CYGWIN__
# #include <cygwin/cygwin_dll.h>
# DECLARE_CYGWIN_DLL( DllMain );
# #endif
# HINSTANCE __hDllInstance_base;
#
# BOOL APIENTRY
# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
# {
# __hDllInstance_base = hInst;
# return TRUE;
# }
# /* ltdll.c ends here */
# This is a source program that is used to create import libraries
# on Windows for dlls which lack them. Don't remove nor modify the
# starting and closing comments
# /* impgen.c starts here */
# /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
#
# This file is part of GNU libtool.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# */
#
# #include <stdio.h> /* for printf() */
# #include <unistd.h> /* for open(), lseek(), read() */
# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
# #include <string.h> /* for strdup() */
#
# /* O_BINARY isn't required (or even defined sometimes) under Unix */
# #ifndef O_BINARY
# #define O_BINARY 0
# #endif
#
# static unsigned int
# pe_get16 (fd, offset)
# int fd;
# int offset;
# {
# unsigned char b[2];
# lseek (fd, offset, SEEK_SET);
# read (fd, b, 2);
# return b[0] + (b[1]<<8);
# }
#
# static unsigned int
# pe_get32 (fd, offset)
# int fd;
# int offset;
# {
# unsigned char b[4];
# lseek (fd, offset, SEEK_SET);
# read (fd, b, 4);
# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# static unsigned int
# pe_as32 (ptr)
# void *ptr;
# {
# unsigned char *b = ptr;
# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# int
# main (argc, argv)
# int argc;
# char *argv[];
# {
# int dll;
# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
# unsigned long export_rva, export_size, nsections, secptr, expptr;
# unsigned long name_rvas, nexp;
# unsigned char *expdata, *erva;
# char *filename, *dll_name;
#
# filename = argv[1];
#
# dll = open(filename, O_RDONLY|O_BINARY);
# if (dll < 1)
# return 1;
#
# dll_name = filename;
#
# for (i=0; filename[i]; i++)
# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
# dll_name = filename + i +1;
#
# pe_header_offset = pe_get32 (dll, 0x3c);
# opthdr_ofs = pe_header_offset + 4 + 20;
# num_entries = pe_get32 (dll, opthdr_ofs + 92);
#
# if (num_entries < 1) /* no exports */
# return 1;
#
# export_rva = pe_get32 (dll, opthdr_ofs + 96);
# export_size = pe_get32 (dll, opthdr_ofs + 100);
# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
# secptr = (pe_header_offset + 4 + 20 +
# pe_get16 (dll, pe_header_offset + 4 + 16));
#
# expptr = 0;
# for (i = 0; i < nsections; i++)
# {
# char sname[8];
# unsigned long secptr1 = secptr + 40 * i;
# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
# lseek(dll, secptr1, SEEK_SET);
# read(dll, sname, 8);
# if (vaddr <= export_rva && vaddr+vsize > export_rva)
# {
# expptr = fptr + (export_rva - vaddr);
# if (export_rva + export_size > vaddr + vsize)
# export_size = vsize - (export_rva - vaddr);
# break;
# }
# }
#
# expdata = (unsigned char*)malloc(export_size);
# lseek (dll, expptr, SEEK_SET);
# read (dll, expdata, export_size);
# erva = expdata - export_rva;
#
# nexp = pe_as32 (expdata+24);
# name_rvas = pe_as32 (expdata+32);
#
# printf ("EXPORTS\n");
# for (i = 0; i<nexp; i++)
# {
# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
# }
#
# return 0;
# }
# /* impgen.c ends here */
EOF
;;
esac
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
mv -f "${ofile}T" "$ofile" || \
(rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
chmod +x "$ofile"
fi
##
## END FIXME
# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
## Copyright 1996, 1997, 1998, 1999, 2000, 2001
## Free Software Foundation, Inc.
## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
## General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
##
## As a special exception to the GNU General Public License, if you
## distribute this file as part of a program that contains a
## configuration script generated by Autoconf, you may include it under
## the same distribution terms that you use for the rest of that program.
# serial 46 AC_PROG_LIBTOOL
# _LT_AC_CHECK_DLFCN
# --------------------
# _LT_AC_CHECK_DLFCN
# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
# ---------------------------------
# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
# ---------------------------------
# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
# _LT_AC_PROG_ECHO_BACKSLASH
# --------------------------
# Add some code to the start of the generated configure script which
# will find an echo command which doesn;t interpret backslashes.
# _LT_AC_PROG_ECHO_BACKSLASH
# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ------------------------------------------------------------------
# _LT_AC_TRY_DLOPEN_SELF
# AC_LIBTOOL_DLOPEN_SELF
# -------------------
# AC_LIBTOOL_DLOPEN_SELF
# _LT_AC_LTCONFIG_HACK
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
# AC_DISABLE_STATIC - set the default static flag to --disable-static
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
# AC_LIBTOOL_PICMODE - implement the --with-pic flag
# Usage: AC_LIBTOOL_PICMODE[(MODE)]
# Where MODE is either `yes' or `no'. If omitted, it defaults to
# `both'.
# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
# AC_PATH_MAGIC - find a file program which can recognise a shared library
# AC_PROG_LD - find the path to the GNU or non-GNU linker
# AC_PROG_LD_GNU -
# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
# -- PORTME Some linkers may need a different reload flag.
# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
# AC_PROG_NM - find the path to a BSD-compatible name lister
# AC_CHECK_LIBM - check for math library
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments. Note that LIBLTDL and INCLTDL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
# with '${top_builddir}/' and INCLTDL will be prefixed with
# '${top_srcdir}/' (note the single quotes!). If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
# with '${top_srcdir}/' (note the single quotes!). If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
# old names
# This is just to silence aclocal about the macro not being used
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# Prevent multiple expansion
ac_config_files="$ac_config_files Makefile l2-config"
ac_config_commands="$ac_config_commands default"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems. If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overriden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
_ACEOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
{
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n \
"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
;;
esac;
} |
sed '
t clear
: clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
/^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
: end' >>confcache
if cmp -s $cache_file confcache; then :; else
if test -w $cache_file; then
test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
cat confcache >$cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[ ]*\):*/\1/;
s/:*$//;
s/^[^=]*=[ ]*$//;
}'
fi
DEFS=-DHAVE_CONFIG_H
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:6861: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
SHELL=\${CONFIG_SHELL-$SHELL}
ac_cs_invocation="\$0 \$@"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
set -o posix
fi
# Name of the executable.
as_me=`echo "$0" |sed 's,.*[\\/],,'`
if expr a : '\(a\)' >/dev/null 2>&1; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
# We could just check for DJGPP; but this test a) works b) is more generic
# and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
if test -f conf$$.exe; then
# Don't use ln at all; we don't have any links
as_ln_s='cp -p'
else
as_ln_s='ln -s'
fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file
as_executable_p="test -f"
# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
fi
# NLS nuisances.
$as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
$as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
$as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
$as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
$as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
$as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
$as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
$as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" $as_nl"
# CDPATH.
$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
exec 6>&1
_ACEOF
# Files that config.status was made for.
if test -n "$ac_config_files"; then
echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
fi
if test -n "$ac_config_headers"; then
echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
fi
if test -n "$ac_config_links"; then
echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
fi
if test -n "$ac_config_commands"; then
echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
fi
cat >>$CONFIG_STATUS <<\EOF
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
-V, --version print version number, then exit
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
--header=FILE[:TEMPLATE]
instantiate the configuration header FILE
Configuration files:
$config_files
Configuration headers:
$config_headers
Configuration commands:
$config_commands
Report bugs to <bug-autoconf@gnu.org>."
EOF
cat >>$CONFIG_STATUS <<EOF
ac_cs_version="\\
config.status
configured by $0, generated by GNU Autoconf 2.52,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=$srcdir
EOF
cat >>$CONFIG_STATUS <<\EOF
# If no file are specified by the user, then we need to provide default
# value. By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=*)
ac_option=`expr "x$1" : 'x\([^=]*\)='`
ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
shift
set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
shift
;;
-*);;
*) # This is not an option, so the user has probably given explicit
# arguments.
ac_need_defaults=false;;
esac
case $1 in
# Handling of the options.
EOF
cat >>$CONFIG_STATUS <<EOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
EOF
cat >>$CONFIG_STATUS <<\EOF
--version | --vers* | -V )
echo "$ac_cs_version"; exit 0 ;;
--he | --h)
# Conflict between --help and --header
{ { echo "$as_me:7036: error: ambiguous option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
{ (exit 1); exit 1; }; };;
--help | --hel | -h )
echo "$ac_cs_usage"; exit 0 ;;
--debug | --d* | -d )
debug=: ;;
--file | --fil | --fi | --f )
shift
CONFIG_FILES="$CONFIG_FILES $1"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
shift
CONFIG_HEADERS="$CONFIG_HEADERS $1"
ac_need_defaults=false;;
# This is an error.
-*) { { echo "$as_me:7055: error: unrecognized option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
{ (exit 1); exit 1; }; } ;;
*) ac_config_targets="$ac_config_targets $1" ;;
esac
shift
done
exec 5>>config.log
cat >&5 << _ACEOF
## ----------------------- ##
## Running config.status. ##
## ----------------------- ##
This file was extended by $as_me 2.52, executed with
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
> $ac_cs_invocation
on `(hostname || uname -n) 2>/dev/null | sed 1q`
_ACEOF
EOF
cat >>$CONFIG_STATUS <<\EOF
for ac_config_target in $ac_config_targets
do
case "$ac_config_target" in
# Handling of arguments.
"Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"l2-config" ) CONFIG_FILES="$CONFIG_FILES l2-config" ;;
"default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
"l2_config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS l2_config.h" ;;
*) { { echo "$as_me:7094: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
: ${TMPDIR=/tmp}
{
tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
tmp=$TMPDIR/cs$$-$RANDOM
(umask 077 && mkdir $tmp)
} ||
{
echo "$me: cannot create a temporary directory in $TMPDIR" >&2
{ (exit 1); exit 1; }
}
EOF
cat >>$CONFIG_STATUS <<EOF
#
# CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "\$CONFIG_FILES"; then
# Protect against being on the right side of a sed subst in config.status.
sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
s,@SHELL@,$SHELL,;t t
s,@exec_prefix@,$exec_prefix,;t t
s,@prefix@,$prefix,;t t
s,@program_transform_name@,$program_transform_name,;t t
s,@bindir@,$bindir,;t t
s,@sbindir@,$sbindir,;t t
s,@libexecdir@,$libexecdir,;t t
s,@datadir@,$datadir,;t t
s,@sysconfdir@,$sysconfdir,;t t
s,@sharedstatedir@,$sharedstatedir,;t t
s,@localstatedir@,$localstatedir,;t t
s,@libdir@,$libdir,;t t
s,@includedir@,$includedir,;t t
s,@oldincludedir@,$oldincludedir,;t t
s,@infodir@,$infodir,;t t
s,@mandir@,$mandir,;t t
s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
s,@build_alias@,$build_alias,;t t
s,@host_alias@,$host_alias,;t t
s,@target_alias@,$target_alias,;t t
s,@ECHO_C@,$ECHO_C,;t t
s,@ECHO_N@,$ECHO_N,;t t
s,@ECHO_T@,$ECHO_T,;t t
s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
s,@DEFS@,$DEFS,;t t
s,@LIBS@,$LIBS,;t t
s,@L2_VERSION_STR@,$L2_VERSION_STR,;t t
s,@L2_VERSION_HEX@,$L2_VERSION_HEX,;t t
s,@PLATFORM@,$PLATFORM,;t t
s,@LIBL2XX_LA@,$LIBL2XX_LA,;t t
s,@L2_TESTXX@,$L2_TESTXX,;t t
s,@L2XX_3@,$L2XX_3,;t t
s,@TEST_CXX@,$TEST_CXX,;t t
s,@INSTALL_CXX@,$INSTALL_CXX,;t t
s,@UNINSTALL_CXX@,$UNINSTALL_CXX,;t t
s,@SET_MAKE@,$SET_MAKE,;t t
s,@CC@,$CC,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@LDFLAGS@,$LDFLAGS,;t t
s,@CPPFLAGS@,$CPPFLAGS,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
s,@CXX@,$CXX,;t t
s,@CXXFLAGS@,$CXXFLAGS,;t t
s,@ac_ct_CXX@,$ac_ct_CXX,;t t
s,@CPP@,$CPP,;t t
s,@build@,$build,;t t
s,@build_cpu@,$build_cpu,;t t
s,@build_vendor@,$build_vendor,;t t
s,@build_os@,$build_os,;t t
s,@host@,$host,;t t
s,@host_cpu@,$host_cpu,;t t
s,@host_vendor@,$host_vendor,;t t
s,@host_os@,$host_os,;t t
s,@LN_S@,$LN_S,;t t
s,@ECHO@,$ECHO,;t t
s,@RANLIB@,$RANLIB,;t t
s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
s,@STRIP@,$STRIP,;t t
s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
s,@LIBTOOL@,$LIBTOOL,;t t
CEOF
EOF
cat >>$CONFIG_STATUS <<\EOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_lines=48
ac_sed_frag=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_lines # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
else
sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
fi
if test ! -s $tmp/subs.frag; then
ac_more_lines=false
else
# The purpose of the label and of the branching condition is to
# speed up the sed processing (if there are no `@' at all, there
# is no need to browse any of the substitutions).
# These are the two extra sed commands mentioned above.
(echo ':t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
else
ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
fi
ac_sed_frag=`expr $ac_sed_frag + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_lines`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
fi # test -n "$CONFIG_FILES"
EOF
cat >>$CONFIG_STATUS <<\EOF
for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- | *:- | *:-:* ) # input from stdin
cat >$tmp/stdin
ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
* ) ac_file_in=$ac_file.in ;;
esac
# Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
{ case "$ac_dir" in
[\\/]* | ?:[\\/]* ) as_incr_dir=;;
*) as_incr_dir=.;;
esac
as_dummy="$ac_dir"
for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
case $as_mkdir_dir in
# Skip DOS drivespec
?:) as_incr_dir=$as_mkdir_dir ;;
*)
as_incr_dir=$as_incr_dir/$as_mkdir_dir
test -d "$as_incr_dir" || mkdir "$as_incr_dir"
;;
esac
done; }
ac_dir_suffix="/`echo $ac_dir|sed 's,^\./,,'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo "$ac_dir_suffix" | sed 's,/[^/]*,../,g'`
else
ac_dir_suffix= ac_dots=
fi
case $srcdir in
.) ac_srcdir=.
if test -z "$ac_dots"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_dots | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* )
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_dots$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_dots$srcdir ;;
esac
if test x"$ac_file" != x-; then
{ echo "$as_me:7321: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
rm -f "$ac_file"
fi
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated automatically by config.status. */
configure_input="Generated automatically from `echo $ac_file_in |
sed 's,.*/,,'` by configure."
# First look for the input files in the build tree, otherwise in the
# src tree.
ac_file_inputs=`IFS=:
for f in $ac_file_in; do
case $f in
-) echo $tmp/stdin ;;
[\\/$]*)
# Absolute (can't be DOS-style, as IFS=:)
test -f "$f" || { { echo "$as_me:7339: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
echo $f;;
*) # Relative
if test -f "$f"; then
# Build tree
echo $f
elif test -f "$srcdir/$f"; then
# Source tree
echo $srcdir/$f
else
# /dev/null tree
{ { echo "$as_me:7352: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
fi;;
esac
done` || { (exit 1); exit 1; }
EOF
cat >>$CONFIG_STATUS <<EOF
sed "$ac_vpsub
$extrasub
EOF
cat >>$CONFIG_STATUS <<\EOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
rm -f $tmp/stdin
if test x"$ac_file" != x-; then
mv $tmp/out $ac_file
else
cat $tmp/out
rm -f $tmp/out
fi
done
EOF
cat >>$CONFIG_STATUS <<\EOF
#
# CONFIG_HEADER section.
#
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
ac_dB='[ ].*$,\1#\2'
ac_dC=' '
ac_dD=',;t'
# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='$,\1#\2define\3'
ac_uC=' '
ac_uD=',;t'
for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case $ac_file in
- | *:- | *:-:* ) # input from stdin
cat >$tmp/stdin
ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
* ) ac_file_in=$ac_file.in ;;
esac
test x"$ac_file" != x- && { echo "$as_me:7412: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
# First look for the input files in the build tree, otherwise in the
# src tree.
ac_file_inputs=`IFS=:
for f in $ac_file_in; do
case $f in
-) echo $tmp/stdin ;;
[\\/$]*)
# Absolute (can't be DOS-style, as IFS=:)
test -f "$f" || { { echo "$as_me:7423: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
echo $f;;
*) # Relative
if test -f "$f"; then
# Build tree
echo $f
elif test -f "$srcdir/$f"; then
# Source tree
echo $srcdir/$f
else
# /dev/null tree
{ { echo "$as_me:7436: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
fi;;
esac
done` || { (exit 1); exit 1; }
# Remove the trailing spaces.
sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
EOF
# Transform confdefs.h into two sed scripts, `conftest.defines' and
# `conftest.undefs', that substitutes the proper values into
# config.h.in to produce config.h. The first handles `#define'
# templates, and the second `#undef' templates.
# And first: Protect against being on the right side of a sed subst in
# config.status. Protect against being in an unquoted here document
# in config.status.
rm -f conftest.defines conftest.undefs
# Using a here document instead of a string reduces the quoting nightmare.
# Putting comments in sed scripts is not portable.
#
# `end' is used to avoid that the second main sed command (meant for
# 0-ary CPP macros) applies to n-ary macro definitions.
# See the Autoconf documentation for `clear'.
cat >confdef2sed.sed <<\EOF
s/[\\&,]/\\&/g
s,[\\$`],\\&,g
t clear
: clear
s,^[ ]*#[ ]*define[ ][ ]*\(\([^ (][^ (]*\)([^)]*)\)[ ]*\(.*\)$,${ac_dA}\2${ac_dB}\1${ac_dC}\3${ac_dD},gp
t end
s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
: end
EOF
# If some macros were called several times there might be several times
# the same #defines, which is useless. Nevertheless, we may not want to
# sort them, since we want the *last* AC-DEFINE to be honored.
uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
rm -f confdef2sed.sed
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >>conftest.undefs <<\EOF
s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
EOF
# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
echo ' if egrep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo ' :' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.defines >/dev/null
do
# Write a limited-size here document to $tmp/defines.sed.
echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#define' lines.
echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/defines.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
rm -f conftest.defines
mv conftest.tail conftest.defines
done
rm -f conftest.defines
echo ' fi # egrep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS
# Break up conftest.undefs because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.undefs >/dev/null
do
# Write a limited-size here document to $tmp/undefs.sed.
echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#undef'
echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/undefs.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
rm -f conftest.undefs
mv conftest.tail conftest.undefs
done
rm -f conftest.undefs
cat >>$CONFIG_STATUS <<\EOF
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated automatically by config.status. */
if test x"$ac_file" = x-; then
echo "/* Generated automatically by configure. */" >$tmp/config.h
else
echo "/* $ac_file. Generated automatically by configure. */" >$tmp/config.h
fi
cat $tmp/in >>$tmp/config.h
rm -f $tmp/in
if test x"$ac_file" != x-; then
if cmp -s $ac_file $tmp/config.h 2>/dev/null; then
{ echo "$as_me:7553: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
{ case "$ac_dir" in
[\\/]* | ?:[\\/]* ) as_incr_dir=;;
*) as_incr_dir=.;;
esac
as_dummy="$ac_dir"
for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
case $as_mkdir_dir in
# Skip DOS drivespec
?:) as_incr_dir=$as_mkdir_dir ;;
*)
as_incr_dir=$as_incr_dir/$as_mkdir_dir
test -d "$as_incr_dir" || mkdir "$as_incr_dir"
;;
esac
done; }
fi
rm -f $ac_file
mv $tmp/config.h $ac_file
fi
else
cat $tmp/config.h
rm -f $tmp/config.h
fi
done
EOF
cat >>$CONFIG_STATUS <<\EOF
#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
case $ac_dest in
default ) chmod a+x l2-config
;;
esac
done
EOF
cat >>$CONFIG_STATUS <<\EOF
{ (exit 0); exit 0; }
EOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded. So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
exec 5>/dev/null
$SHELL $CONFIG_STATUS || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi
