--- ltmain.sh 2001/05/10 19:46:01 1.1
+++ ltmain.sh 2001/08/15 07:49:59 1.2
@@ -1,7 +1,8 @@
# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
@@ -54,8 +55,8 @@
# Constants.
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.3.5
-TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
+VERSION=1.4
+TIMESTAMP=" (1.920 2001/04/24 23:26:18)"
default_mode=
help="Try \`$progname --help' for more information."
@@ -83,12 +84,6 @@
save_LANG="$LANG"; LANG=C; export LANG
fi
-if test "$LTCONFIG_VERSION" != "$VERSION"; then
- echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
-fi
-
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
echo "$modename: not configured to build any kind of library" 1>&2
echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
@@ -113,16 +108,16 @@
arg="$1"
shift
- case "$arg" in
+ case $arg in
-*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
*) optarg= ;;
esac
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
- case "$prev" in
+ case $prev in
execute_dlfiles)
- eval "$prev=\"\$$prev \$arg\""
+ execute_dlfiles="$execute_dlfiles $arg"
;;
*)
eval "$prev=\$arg"
@@ -135,7 +130,7 @@
fi
# Have we seen a non-optional argument yet?
- case "$arg" in
+ case $arg in
--help)
show_help=yes
;;
@@ -146,7 +141,7 @@
;;
--config)
- sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+ sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
exit 0
;;
@@ -211,12 +206,12 @@
# Infer the operation mode.
if test -z "$mode"; then
- case "$nonopt" in
+ case $nonopt in
*cc | *++ | gcc* | *-gcc*)
mode=link
for arg
do
- case "$arg" in
+ case $arg in
-c)
mode=compile
break
@@ -261,12 +256,13 @@
help="Try \`$modename --help --mode=$mode' for more information."
# These modes are in order of execution frequency so that they run quickly.
- case "$mode" in
+ case $mode in
# libtool compile mode
compile)
modename="$modename: compile"
# Get the compilation command and the source file.
base_compile=
+ prev=
lastarg=
srcfile="$nonopt"
suppress_output=
@@ -274,8 +270,34 @@
user_target=no
for arg
do
+ case $prev in
+ "") ;;
+ xcompiler)
+ # Aesthetically quote the previous argument.
+ prev=
+ lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+
+ case $arg in
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+
+ # Add the previous argument to base_compile.
+ if test -z "$base_compile"; then
+ base_compile="$lastarg"
+ else
+ base_compile="$base_compile $lastarg"
+ fi
+ continue
+ ;;
+ esac
+
# Accept any command-line options.
- case "$arg" in
+ case $arg in
-o)
if test "$user_target" != "no"; then
$echo "$modename: you cannot specify \`-o' more than once" 1>&2
@@ -288,9 +310,53 @@
build_old_libs=yes
continue
;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+ lastarg=
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ lastarg="$lastarg $arg"
+ done
+ IFS="$save_ifs"
+ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+ # Add the arguments to base_compile.
+ if test -z "$base_compile"; then
+ base_compile="$lastarg"
+ else
+ base_compile="$base_compile $lastarg"
+ fi
+ continue
+ ;;
esac
- case "$user_target" in
+ case $user_target in
next)
# The next one is the -o target name
user_target=yes
@@ -316,10 +382,10 @@
lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
# Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly in scan
- # sets, so we specify it separately.
- case "$lastarg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ case $lastarg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
lastarg="\"$lastarg\""
;;
esac
@@ -332,7 +398,7 @@
fi
done
- case "$user_target" in
+ case $user_target in
set)
;;
no)
@@ -348,7 +414,7 @@
# Recognize several different file suffixes.
# If the user specifies -o file.o, it is replaced with file.lo
xform='[cCFSfmso]'
- case "$libobj" in
+ case $libobj in
*.ada) xform=ada ;;
*.adb) xform=adb ;;
*.ads) xform=ads ;;
@@ -363,7 +429,7 @@
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
- case "$libobj" in
+ case $libobj in
*.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
*)
$echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
@@ -387,10 +453,21 @@
$run $rm $removelist
trap "$run $rm $removelist; exit 1" 1 2 15
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2*)
+ pic_mode=default
+ ;;
+ esac
+ if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
# Calculate the filename of the output object if compiler does
# not support -o with -c
if test "$compiler_c_o" = no; then
- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
removelist="$removelist $output_obj $lockfile"
trap "$run $rm $removelist; exit 1" 1 2 15
@@ -402,7 +479,7 @@
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
if test "$need_locks" = yes; then
- until ln "$0" "$lockfile" 2>/dev/null; do
+ until $run ln "$0" "$lockfile" 2>/dev/null; do
$show "Waiting for $lockfile to be removed"
sleep 2
done
@@ -434,8 +511,13 @@
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
- # All platforms use -DPIC, to notify preprocessed assembler code.
- command="$base_compile $srcfile $pic_flag -DPIC"
+ if test "$pic_mode" != no; then
+ # All platforms use -DPIC, to notify preprocessed assembler code.
+ command="$base_compile $srcfile $pic_flag -DPIC"
+ else
+ # Don't build PIC code
+ command="$base_compile $srcfile"
+ fi
if test "$build_old_libs" = yes; then
lo_libobj="$libobj"
dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
@@ -506,7 +588,8 @@
fi
# If we have no pic_flag, then copy the object into place and finish.
- if test -z "$pic_flag" && test "$build_old_libs" = yes; then
+ if (test -z "$pic_flag" || test "$pic_mode" != default) &&
+ test "$build_old_libs" = yes; then
# Rename the .lo from within objdir to obj
if test -f $obj; then
$show $rm $obj
@@ -546,7 +629,13 @@
# Only build a position-dependent object if we build old libraries.
if test "$build_old_libs" = yes; then
- command="$base_compile $srcfile"
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $srcfile"
+ else
+ # All platforms use -DPIC, to notify preprocessed assembler code.
+ command="$base_compile $srcfile $pic_flag -DPIC"
+ fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
output_obj="$obj"
@@ -612,17 +701,17 @@
# Unlock the critical section if it was locked
if test "$need_locks" != no; then
- $rm "$lockfile"
+ $run $rm "$lockfile"
fi
exit 0
;;
# libtool link mode
- link)
+ link | relink)
modename="$modename: link"
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2*)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
# which system we are compiling for in order to pass an extra
@@ -635,179 +724,12 @@
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
allow_undefined=yes
-
- # This is a source program that is used to create dlls on Windows
- # Don't remove nor modify the starting and closing comments
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
- # This is a source program that is used to create import libraries
- # on Windows for dlls which lack them. Don't remove nor modify the
- # starting and closing comments
-# /* impgen.c starts here */
-# /* Copyright (C) 1999 Free Software Foundation, Inc.
-#
-# This file is part of GNU libtool.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-# */
-#
-# #include <stdio.h> /* for printf() */
-# #include <unistd.h> /* for open(), lseek(), read() */
-# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
-# #include <string.h> /* for strdup() */
-#
-# static unsigned int
-# pe_get16 (fd, offset)
-# int fd;
-# int offset;
-# {
-# unsigned char b[2];
-# lseek (fd, offset, SEEK_SET);
-# read (fd, b, 2);
-# return b[0] + (b[1]<<8);
-# }
-#
-# static unsigned int
-# pe_get32 (fd, offset)
-# int fd;
-# int offset;
-# {
-# unsigned char b[4];
-# lseek (fd, offset, SEEK_SET);
-# read (fd, b, 4);
-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# static unsigned int
-# pe_as32 (ptr)
-# void *ptr;
-# {
-# unsigned char *b = ptr;
-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
-# }
-#
-# int
-# main (argc, argv)
-# int argc;
-# char *argv[];
-# {
-# int dll;
-# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
-# unsigned long export_rva, export_size, nsections, secptr, expptr;
-# unsigned long name_rvas, nexp;
-# unsigned char *expdata, *erva;
-# char *filename, *dll_name;
-#
-# filename = argv[1];
-#
-# dll = open(filename, O_RDONLY|O_BINARY);
-# if (!dll)
-# return 1;
-#
-# dll_name = filename;
-#
-# for (i=0; filename[i]; i++)
-# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
-# dll_name = filename + i +1;
-#
-# pe_header_offset = pe_get32 (dll, 0x3c);
-# opthdr_ofs = pe_header_offset + 4 + 20;
-# num_entries = pe_get32 (dll, opthdr_ofs + 92);
-#
-# if (num_entries < 1) /* no exports */
-# return 1;
-#
-# export_rva = pe_get32 (dll, opthdr_ofs + 96);
-# export_size = pe_get32 (dll, opthdr_ofs + 100);
-# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
-# secptr = (pe_header_offset + 4 + 20 +
-# pe_get16 (dll, pe_header_offset + 4 + 16));
-#
-# expptr = 0;
-# for (i = 0; i < nsections; i++)
-# {
-# char sname[8];
-# unsigned long secptr1 = secptr + 40 * i;
-# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
-# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
-# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
-# lseek(dll, secptr1, SEEK_SET);
-# read(dll, sname, 8);
-# if (vaddr <= export_rva && vaddr+vsize > export_rva)
-# {
-# expptr = fptr + (export_rva - vaddr);
-# if (export_rva + export_size > vaddr + vsize)
-# export_size = vsize - (export_rva - vaddr);
-# break;
-# }
-# }
-#
-# expdata = (unsigned char*)malloc(export_size);
-# lseek (dll, expptr, SEEK_SET);
-# read (dll, expdata, export_size);
-# erva = expdata - export_rva;
-#
-# nexp = pe_as32 (expdata+24);
-# name_rvas = pe_as32 (expdata+32);
-#
-# printf ("EXPORTS\n");
-# for (i = 0; i<nexp; i++)
-# {
-# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
-# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
-# }
-#
-# return 0;
-# }
-# /* impgen.c ends here */
;;
*)
allow_undefined=yes
;;
esac
+ libtool_args="$nonopt"
compile_command="$nonopt"
finalize_command="$nonopt"
@@ -818,18 +740,12 @@
convenience=
old_convenience=
deplibs=
- linkopts=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
- else
- lib_search_path=
- fi
- # now prepend the system-specific ones
- eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
avoid_version=no
dlfiles=
dlprefiles=
@@ -839,9 +755,9 @@
export_symbols_regex=
generated=
libobjs=
- link_against_libtool_libs=
ltlibs=
module=no
+ no_install=no
objs=
prefer_static_libs=no
preload=no
@@ -858,7 +774,7 @@
# We need to know -static, to get the right output filenames.
for arg
do
- case "$arg" in
+ case $arg in
-all-static | -static)
if test "X$arg" = "X-all-static"; then
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
@@ -887,17 +803,24 @@
while test $# -gt 0; do
arg="$1"
shift
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+ ;;
+ *) qarg=$arg ;;
+ esac
+ libtool_args="$libtool_args $qarg"
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
- case "$prev" in
+ case $prev in
output)
compile_command="$compile_command @OUTPUT@"
finalize_command="$finalize_command @OUTPUT@"
;;
esac
- case "$prev" in
+ case $prev in
dlfiles|dlprefiles)
if test "$preload" = no; then
# Add the symbol object into the linking commands.
@@ -905,7 +828,7 @@
finalize_command="$finalize_command @SYMFILE@"
preload=yes
fi
- case "$arg" in
+ case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
if test "$dlself" = no; then
@@ -934,6 +857,7 @@
dlprefiles="$dlprefiles $arg"
fi
prev=
+ continue
;;
esac
;;
@@ -958,7 +882,7 @@
;;
rpath | xrpath)
# We need an absolute path.
- case "$arg" in
+ case $arg in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
$echo "$modename: only absolute run-paths are allowed" 1>&2
@@ -979,17 +903,32 @@
prev=
continue
;;
+ xcompiler)
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ compile_command="$compile_command $qarg"
+ finalize_command="$finalize_command $qarg"
+ continue
+ ;;
+ xlinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $wl$qarg"
+ prev=
+ compile_command="$compile_command $wl$qarg"
+ finalize_command="$finalize_command $wl$qarg"
+ continue
+ ;;
*)
eval "$prev=\"\$arg\""
prev=
continue
;;
esac
- fi
+ fi # test -n $prev
prevarg="$arg"
- case "$arg" in
+ case $arg in
-all-static)
if test -n "$link_static_flag"; then
compile_command="$compile_command $link_static_flag"
@@ -1026,7 +965,7 @@
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: not more than one -exported-symbols argument allowed"
+ $echo "$modename: more than one -exported-symbols argument is not allowed"
exit 1
fi
if test "X$arg" = "X-export-symbols"; then
@@ -1037,58 +976,65 @@
continue
;;
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix*)
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ ;;
+ esac
+ continue
+ ;;
+
-L*)
dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
# We need an absolute path.
- case "$dir" in
+ case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- absdir="$dir"
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+ exit 1
fi
dir="$absdir"
;;
esac
- case " $deplibs " in
- *" $arg "*) ;;
- *) deplibs="$deplibs $arg";;
- esac
- case " $lib_search_path " in
- *" $dir "*) ;;
- *) lib_search_path="$lib_search_path $dir";;
+ case "$deplibs " in
+ *" -L$dir "*) ;;
+ *)
+ deplibs="$deplibs -L$dir"
+ lib_search_path="$lib_search_path $dir"
+ ;;
esac
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2*)
- dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
- case ":$dllsearchpath:" in
- ::) dllsearchpath="$dllsearchdir";;
- *":$dllsearchdir:"*) ;;
- *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$dir";;
esac
;;
esac
+ continue
;;
-l*)
- if test "$arg" = "-lc"; then
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
- # These systems don't actually have c library (as such)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-pw32* | *-*-beos*)
+ # These systems don't actually have a C or math library (as such)
continue
;;
- esac
- elif test "$arg" = "-lm"; then
- case "$host" in
- *-*-cygwin* | *-*-beos*)
- # These systems don't actually have math library (as such)
- continue
+ *-*-mingw* | *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
;;
esac
fi
deplibs="$deplibs $arg"
+ continue
;;
-module)
@@ -1096,6 +1042,25 @@
continue
;;
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # in order for the loader to find any dlls it needs.
+ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
-no-undefined)
allow_undefined=no
continue
@@ -1121,7 +1086,7 @@
-R*)
dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
# We need an absolute path.
- case "$dir" in
+ case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
$echo "$modename: only absolute run-paths are allowed" 1>&2
@@ -1136,11 +1101,11 @@
;;
-static)
- # If we have no pic_flag, then this is the same as -all-static.
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
continue
;;
@@ -1154,28 +1119,71 @@
continue
;;
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+ arg=
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ case $flag in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ flag="\"$flag\""
+ ;;
+ esac
+ arg="$arg $wl$flag"
+ compiler_flags="$compiler_flags $flag"
+ done
+ IFS="$save_ifs"
+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+ ;;
+
+ -Wl,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+ arg=
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ case $flag in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ flag="\"$flag\""
+ ;;
+ esac
+ arg="$arg $wl$flag"
+ compiler_flags="$compiler_flags $wl$flag"
+ linker_flags="$linker_flags $flag"
+ done
+ IFS="$save_ifs"
+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
# Some other compiler flag.
-* | +*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
;;
- *.o | *.obj | *.a | *.lib)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A library object.
+ *.lo | *.$objext)
+ # A library or standard object.
if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
+ # This file was specified with -dlopen.
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $arg"
prev=
continue
else
@@ -1188,357 +1196,890 @@
# Preload the old-style object.
dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
prev=
+ else
+ case $arg in
+ *.lo) libobjs="$libobjs $arg" ;;
+ *) objs="$objs $arg" ;;
+ esac
fi
- libobjs="$libobjs $arg"
+ ;;
+
+ *.$libext)
+ # An archive.
+ deplibs="$deplibs $arg"
+ old_deplibs="$old_deplibs $arg"
+ continue
;;
*.la)
# A libtool-controlled library.
- dlname=
- libdir=
- library_names=
- old_library=
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ dlfiles="$dlfiles $arg"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ dlprefiles="$dlprefiles $arg"
+ prev=
+ else
+ deplibs="$deplibs $arg"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+ done # argument parsing loop
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+
+ # calculate the name of the file, without its directory
+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$output_objdir" = "X$output"; then
+ output_objdir="$objdir"
+ else
+ output_objdir="$output_objdir/$objdir"
+ fi
+ # Create the object directory.
+ if test ! -d $output_objdir; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+ status=$?
+ if test $status -ne 0 && test ! -d $output_objdir; then
+ exit $status
+ fi
+ fi
+
+ # Determine the type of output
+ case $output in
+ "")
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ case "$libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ libs="$libs $deplib"
+ done
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+ case $linkmode in
+ lib)
+ passes="conv link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+ for pass in $passes; do
+ if test $linkmode = prog; then
+ # Determine which files to process
+ case $pass in
+ dlopen)
+ libs="$dlfiles"
+ save_deplibs="$deplibs" # Collect dlpreopened libraries
+ deplibs=
+ ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -l*)
+ if test $linkmode = oldlib && test $linkmode = obj; then
+ $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+ continue
+ fi
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}.la"
+ if test -f "$lib"; then
+ found=yes
+ break
+ fi
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ ;; # -l
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test $pass = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ prog)
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test $pass = scan; then
+ deplibs="$deplib $deplibs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ ;;
+ *)
+ $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test $pass = link; then
+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la) lib="$deplib" ;;
+ *.$libext)
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ if test "$deplibs_check_method" != pass_all; then
+ echo
+ echo "*** Warning: This library needs some functionality provided by $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ else
+ echo
+ echo "*** Warning: Linking the shared library $output against the"
+ echo "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ continue
+ ;;
+ prog)
+ if test $pass != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ newdlprefiles="$newdlprefiles $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ newdlfiles="$newdlfiles $deplib"
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+ if test $found = yes || test -f "$lib"; then :
+ else
+ $echo "$modename: cannot find the library \`$lib'" 1>&2
+ exit 1
+ fi
# Check to see that this really is a libtool archive.
- if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
- $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
exit 1
fi
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$ladir" = "X$lib" && ladir="."
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
# If the library was installed with an old release of libtool,
# it will not redefine variable installed.
installed=yes
# Read the .la file
- # If there is no directory component, then add one.
- case "$arg" in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
+ case $lib in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
esac
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test $linkmode = oldlib && test $linkmode = obj; }; then
+ # Add dl[pre]opened files of deplib
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ fi
+
+ if test $pass = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+ exit 1
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ tmp_libs="$tmp_libs $deplib"
+ done
+ elif test $linkmode != prog && test $linkmode != lib; then
+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
+ exit 1
+ fi
+ continue
+ fi # $pass = conv
+
# Get the name of the library we link against.
linklib=
for l in $old_library $library_names; do
linklib="$l"
done
-
if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
exit 1
fi
- # Find the relevant object directory and library name.
- name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
-
- if test "X$installed" = Xyes; then
- dir="$libdir"
- else
- dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$arg"; then
- dir="$objdir"
+ # This library was specified with -dlopen.
+ if test $pass = dlopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+ exit 1
+ fi
+ if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload.
+ dlprefiles="$dlprefiles $lib"
else
- dir="$dir/$objdir"
+ newdlfiles="$newdlfiles $lib"
fi
- fi
-
- if test -n "$dependency_libs"; then
- # Extract -R and -L from dependency_libs
- temp_deplibs=
- for deplib in $dependency_libs; do
- case "$deplib" in
- -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
- case " $rpath $xrpath " in
- *" $temp_xrpath "*) ;;
- *) xrpath="$xrpath $temp_xrpath";;
- esac;;
- -L*) case "$compile_command $temp_deplibs " in
- *" $deplib "*) ;;
- *) temp_deplibs="$temp_deplibs $deplib";;
- esac
- temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
- case " $lib_search_path " in
- *" $temp_dir "*) ;;
- *) lib_search_path="$lib_search_path $temp_dir";;
- esac
- ;;
- *) temp_deplibs="$temp_deplibs $deplib";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- if test -z "$libdir"; then
- # It is a libtool convenience library, so add in its objects.
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
- deplibs="$deplibs$dependency_libs"
- compile_command="$compile_command $dir/$old_library$dependency_libs"
- finalize_command="$finalize_command $dir/$old_library$dependency_libs"
continue
- fi
+ fi # $pass = dlopen
- # This library was specified with -dlopen.
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking statically,
- # we need to preload.
- prev=dlprefiles
- else
- # We should not create a dependency on this library, but we
- # may need any libraries it requires.
- compile_command="$compile_command$dependency_libs"
- finalize_command="$finalize_command$dependency_libs"
- prev=
- continue
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+ abs_ladir="$ladir"
fi
- fi
+ ;;
+ esac
+ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
- # The library was specified with -dlpreopen.
- if test "$prev" = dlprefiles; then
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ $echo "$modename: warning: library \`$lib' was moved." 1>&2
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$libdir"
+ absdir="$libdir"
+ fi
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi # $installed = yes
+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+ # This library was specified with -dlpreopen.
+ if test $pass = dlpreopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+ exit 1
+ fi
# Prefer using a static library (so that no silly _DYNAMIC symbols
# are required to link).
if test -n "$old_library"; then
- dlprefiles="$dlprefiles $dir/$old_library"
+ newdlprefiles="$newdlprefiles $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ newdlprefiles="$newdlprefiles $dir/$dlname"
else
- dlprefiles="$dlprefiles $dir/$linklib"
+ newdlprefiles="$newdlprefiles $dir/$linklib"
fi
- prev=
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test $linkmode = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs"
+ fi
+ continue
fi
- if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
- link_against_libtool_libs="$link_against_libtool_libs $arg"
- if test -n "$shlibpath_var"; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
- esac
+ if test $linkmode = prog && test $pass != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
fi
- # We need an absolute path.
- case "$dir" in
- [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
- absdir="$dir"
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+ esac
+ # Need to link against all dependency_libs?
+ if test $linkalldeplibs = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
fi
- ;;
- esac
-
- # This is the magic to use -rpath.
- # Skip directories that are in the system default run-time
- # search path, unless they have been requested with -R.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) compile_rpath="$compile_rpath $absdir"
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
- ;;
- esac
+ tmp_libs="$tmp_libs $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
+ link_static=no # Whether the deplib will be linked statically
+ if test -n "$library_names" &&
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ # Link against this shared library
+
+ if test "$linkmode,$pass" = "prog,link" ||
+ { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
*" $libdir "*) ;;
- *) finalize_rpath="$finalize_rpath $libdir"
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
esac
- ;;
- esac
+ if test $linkmode = prog; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var"; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath " in
+ *" $dir "*) ;;
+ *" $absdir "*) ;;
+ *) temp_rpath="$temp_rpath $dir" ;;
+ esac
+ fi
+ fi
+ fi # $linkmode,$pass = prog,link...
- lib_linked=yes
- case "$hardcode_action" in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- compile_command="$compile_command $dir/$linklib"
- deplibs="$deplibs $dir/$linklib"
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2*)
- dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
- if test -n "$dllsearchpath"; then
- dllsearchpath="$dllsearchpath:$dllsearchdir"
- else
- dllsearchpath="$dllsearchdir"
- fi
- ;;
- esac
- elif test "$hardcode_minus_L" = no; then
- case "$host" in
- *-*-sunos*)
- compile_shlibpath="$compile_shlibpath$dir:"
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+
+ if test "$installed" = no; then
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=yes
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+ libname=`eval \\$echo \"$libname_spec\"`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin*)
+ major=`expr $current - $age`
+ versuffix="-$major"
;;
esac
- case "$compile_command " in
- *" -L$dir "*) ;;
- *) compile_command="$compile_command -L$dir";;
- esac
- compile_command="$compile_command -l$name"
- deplibs="$deplibs -L$dir -l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- case ":$compile_shlibpath:" in
- *":$dir:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$dir:";;
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ soname=`echo $soroot | sed -e 's/^.*\///'`
+ newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ $show "extracting exported symbol list from \`$soname'"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ eval cmds=\"$extract_expsyms_cmds\"
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ $show "generating import library for \`$soname'"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ eval cmds=\"$old_archive_from_expsyms_cmds\"
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n $old_archive_from_expsyms_cmds
+
+ if test $linkmode = prog || test "$mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+ exit 1
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
esac
- compile_command="$compile_command -l$name"
- deplibs="$deplibs -l$name"
+ fi
+ if test $linkmode = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
- lib_linked=no
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes && \
+ test "$hardcode_minus_L" != yes && \
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ fi
fi
- ;;
+ fi
- relink)
+ if test $linkmode = prog || test "$mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
if test "$hardcode_direct" = yes; then
- compile_command="$compile_command $absdir/$linklib"
- deplibs="$deplibs $absdir/$linklib"
+ add="$libdir/$linklib"
elif test "$hardcode_minus_L" = yes; then
- case "$compile_command " in
- *" -L$absdir "*) ;;
- *) compile_command="$compile_command -L$absdir";;
- esac
- compile_command="$compile_command -l$name"
- deplibs="$deplibs -L$absdir -l$name"
+ add_dir="-L$libdir"
+ add="-l$name"
elif test "$hardcode_shlibpath_var" = yes; then
- case ":$compile_shlibpath:" in
- *":$absdir:"*) ;;
- *) compile_shlibpath="$compile_shlibpath$absdir:";;
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
esac
- compile_command="$compile_command -l$name"
- deplibs="$deplibs -l$name"
+ add="-l$name"
else
- lib_linked=no
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ add="-l$name"
fi
- ;;
-
- *)
- lib_linked=no
- ;;
- esac
- if test "$lib_linked" != yes; then
- $echo "$modename: configuration error: unsupported hardcode properties"
- exit 1
- fi
-
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- finalize_command="$finalize_command $libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- case "$finalize_command " in
- *" -L$libdir "*) ;;
- *) finalize_command="$finalize_command -L$libdir";;
- esac
- finalize_command="$finalize_command -l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case ":$finalize_shlibpath:" in
- *":$libdir:"*) ;;
- *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
- esac
- finalize_command="$finalize_command -l$name"
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- case "$finalize_command " in
- *" -L$dir "*) ;;
- *) finalize_command="$finalize_command -L$libdir";;
- esac
- finalize_command="$finalize_command -l$name"
+ if test $linkmode = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
fi
- else
- # Transform directly to old archives if we don't build new libraries.
- if test -n "$pic_flag" && test -z "$old_library"; then
- $echo "$modename: cannot find static library for \`$arg'" 1>&2
- exit 1
+ elif test $linkmode = prog; then
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
fi
+ # Try to link the static library
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
if test "$hardcode_direct" != unsupported; then
test -n "$old_library" && linklib="$old_library"
- compile_command="$compile_command $dir/$linklib"
- finalize_command="$finalize_command $dir/$linklib"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
- case "$compile_command " in
- *" -L$dir "*) ;;
- *) compile_command="$compile_command -L$dir";;
- esac
- compile_command="$compile_command -l$name"
- case "$finalize_command " in
- *" -L$dir "*) ;;
- *) finalize_command="$finalize_command -L$dir";;
- esac
- finalize_command="$finalize_command -l$name"
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
- fi
-
- # Add in any libraries that this one depends upon.
- compile_command="$compile_command$dependency_libs"
- finalize_command="$finalize_command$dependency_libs"
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
- libobjs_save="$libobjs"
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ echo "*** Warning: This library needs some functionality provided by $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** Therefore, libtool will create a static module, that should work "
+ echo "*** as long as the dlopening application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ convenience="$convenience $dir/$old_library"
+ old_convenience="$old_convenience $dir/$old_library"
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test $linkmode = lib; then
+ if test -n "$dependency_libs" &&
+ { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
+ test $link_static = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) xrpath="$xrpath $temp_xrpath";;
+ esac;;
+ *) temp_deplibs="$temp_deplibs $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
- case "$output" in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
+ newlib_search_path="$newlib_search_path $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ tmp_libs="$tmp_libs $deplib"
+ done
- *.a | *.lib)
- if test -n "$link_against_libtool_libs"; then
- $echo "$modename: error: cannot link libtool libraries into archives" 1>&2
- exit 1
+ if test $link_all_deplibs != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$deplib" && dir="."
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if grep "^installed=no" $deplib > /dev/null; then
+ path="-L$absdir/$objdir"
+ else
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ if test "$absdir" != "$libdir"; then
+ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+ fi
+ path="-L$absdir"
+ fi
+ ;;
+ *) continue ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$deplibs $path" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test $pass = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
fi
+ if test $pass != dlopen; then
+ test $pass != scan && dependency_libs="$newdependency_libs"
+ if test $pass != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) lib_search_path="$lib_search_path $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
fi
+ if test "$pass" = "conv" &&
+ { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
+ libs="$deplibs" # reset libs
+ deplibs=
+ fi
+ done # for pass
+ if test $linkmode = prog; then
+ dlfiles="$newdlfiles"
+ dlprefiles="$newdlprefiles"
+ fi
+ case $linkmode in
+ oldlib)
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
fi
@@ -1566,11 +2107,12 @@
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs="$output"
+ objs="$objs$old_deplibs"
;;
- *.la)
+ lib)
# Make sure we only generate libraries of the form `libNAME.la'.
- case "$outputname" in
+ case $outputname in
lib*)
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
eval libname=\"$libname_spec\"
@@ -1591,26 +2133,20 @@
;;
esac
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
-
if test -n "$objs"; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
- exit 1
- fi
-
- # How the heck are we supposed to write a wrapper for a shared library?
- if test -n "$link_against_libtool_libs"; then
- $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
- exit 1
+ if test "$deplibs_check_method" != pass_all; then
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+ exit 1
+ else
+ echo
+ echo "*** Warning: Linking the shared library $output against the non-libtool"
+ echo "*** objects $objs is not portable!"
+ libobjs="$libobjs $objs"
+ fi
fi
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
+ if test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
fi
set dummy $rpath
@@ -1628,7 +2164,6 @@
build_libtool_libs=convenience
build_old_libs=yes
fi
- dependency_libs="$deplibs"
if test -n "$vinfo"; then
$echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
@@ -1655,8 +2190,8 @@
age="$4"
# Check that each of the things are valid numbers.
- case "$current" in
- 0 | [1-9] | [1-9][0-9]*) ;;
+ case $current in
+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
*)
$echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
@@ -1664,8 +2199,8 @@
;;
esac
- case "$revision" in
- 0 | [1-9] | [1-9][0-9]*) ;;
+ case $revision in
+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
*)
$echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
@@ -1673,8 +2208,8 @@
;;
esac
- case "$age" in
- 0 | [1-9] | [1-9][0-9]*) ;;
+ case $age in
+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
*)
$echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
@@ -1692,12 +2227,31 @@
major=
versuffix=
verstring=
- case "$version_type" in
+ case $version_type in
none) ;;
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ major=.`expr $current - $age`
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ minor_current=`expr $current + 1`
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current";
+ ;;
+
irix)
major=`expr $current - $age + 1`
- versuffix="$major.$revision"
verstring="sgi$major.$revision"
# Add in all the interfaces that we are compatible with.
@@ -1707,6 +2261,10 @@
loop=`expr $loop - 1`
verstring="sgi$major.$iface:$verstring"
done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
;;
linux)
@@ -1736,21 +2294,11 @@
versuffix=".$current.$revision"
;;
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current";
- ;;
-
windows)
- # Like Linux, but with '-' rather than '.', since we only
- # want one extension on Windows 95.
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
major=`expr $current - $age`
- versuffix="-$major-$age-$revision"
+ versuffix="-$major"
;;
*)
@@ -1777,7 +2325,7 @@
versuffix=
verstring=""
fi
-
+
# Check to see if the archive will have undefined symbols.
if test "$allow_undefined" = yes; then
if test "$allow_undefined_flag" = unsupported; then
@@ -1789,34 +2337,12 @@
# Don't allow undefined symbols.
allow_undefined_flag="$no_undefined_flag"
fi
-
- dependency_libs="$deplibs"
- case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody*)
- # rhapsody is a little odd...
- deplibs="$deplibs -framework System"
- ;;
- *)
- # Add libc to deplibs on all other systems.
- deplibs="$deplibs -lc"
- ;;
- esac
fi
- # Create the output directory, or remove our outputs if we need to.
- if test -d $output_objdir; then
+ if test "$mode" != relink; then
+ # Remove our outputs.
$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
- else
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- status=$?
- if test $status -ne 0 && test ! -d $output_objdir; then
- exit $status
- fi
fi
# Now set the variables for building old libraries.
@@ -1827,7 +2353,70 @@
oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
fi
+ # Eliminate all temporary directories.
+ for path in $notinst_path; do
+ lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
+ deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
+ dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+ done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ temp_xrpath="$temp_xrpath -R$libdir"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) dlfiles="$dlfiles $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) dlprefiles="$dlprefiles $lib" ;;
+ esac
+ done
+
if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ deplibs="$deplibs -framework System"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test $build_libtool_need_lc = "yes"; then
+ deplibs="$deplibs -lc"
+ fi
+ ;;
+ esac
+ fi
+
# Transform deplibs into only deplibs that can be linked in shared.
name_save=$name
libname_save=$libname
@@ -1842,7 +2431,7 @@
major=""
newdeplibs=
droppeddeps=no
- case "$deplibs_check_method" in
+ case $deplibs_check_method in
pass_all)
# Don't check for shared/static. Everything works.
# This might be a little naive. We might want to check
@@ -1867,7 +2456,7 @@
for i in $deplibs; do
name="`expr $i : '-l\(.*\)'`"
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" ; then
+ if test -n "$name" && test "$name" != "0"; then
libname=`eval \\$echo \"$libname_spec\"`
deplib_matches=`eval \\$echo \"$library_names_spec\"`
set dummy $deplib_matches
@@ -1892,7 +2481,7 @@
for i in $deplibs; do
name="`expr $i : '-l\(.*\)'`"
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" ; then
+ if test -n "$name" && test "$name" != "0"; then
$rm conftest
$CC -o conftest conftest.c $i
# Did it work?
@@ -1928,19 +2517,19 @@
;;
file_magic*)
set dummy $deplibs_check_method
- file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
+ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
name="`expr $a_deplib : '-l\(.*\)'`"
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" ; then
+ if test -n "$name" && test "$name" != "0"; then
libname=`eval \\$echo \"$libname_spec\"`
- for i in $lib_search_path; do
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
# Follow soft links.
if ls -lLd "$potent_lib" 2>/dev/null \
| grep " -> " >/dev/null; then
- continue
+ continue
fi
# The statement above tries to avoid entering an
# endless loop below, in case of cyclic links.
@@ -1950,7 +2539,7 @@
potlib="$potent_lib"
while test -h "$potlib" 2>/dev/null; do
potliblink=`ls -ld $potlib | sed 's/.* -> //'`
- case "$potliblink" in
+ case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
esac
@@ -1978,6 +2567,40 @@
fi
done # Gone through all deplibs.
;;
+ match_pattern*)
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ for a_deplib in $deplibs; do
+ name="`expr $a_deplib : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+ if test -n "$name" && test "$name" != "0"; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ if eval echo \"$potent_lib\" 2>/dev/null \
+ | sed 10q \
+ | egrep "$match_pattern_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ echo "*** Warning: This library needs some functionality provided by $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
+ else
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ fi
+ done # Gone through all deplibs.
+ ;;
none | unknown | *)
newdeplibs=""
if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
@@ -2000,6 +2623,13 @@
libname=$libname_save
name=$name_save
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ ;;
+ esac
+
if test "$droppeddeps" = yes; then
if test "$module" = yes; then
echo
@@ -2025,6 +2655,21 @@
echo "*** The inter-library dependencies that have been dropped here will be"
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
+
+ if test $allow_undefined = no; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
fi
fi
# Done checking deplibs!
@@ -2035,9 +2680,64 @@
library_names=
old_library=
dlname=
-
+
# Test again, we may have decided not to build it any more
if test "$build_libtool_libs" = yes; then
+ if test $hardcode_into_libs = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ dep_rpath="$dep_rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
# Get the real and link names of the library.
eval library_names=\"$library_names_spec\"
set dummy $library_names
@@ -2049,6 +2749,7 @@
else
soname="$realname"
fi
+ test -z "$dlname" && dlname=$soname
lib="$output_objdir/$realname"
for link
@@ -2120,7 +2821,7 @@
for xlib in $convenience; do
# Extract the objects.
- case "$xlib" in
+ case $xlib in
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
*) xabs=`pwd`"/$xlib" ;;
esac
@@ -2145,7 +2846,12 @@
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
- linkopts="$linkopts $flag"
+ linker_flags="$linker_flags $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
@@ -2162,6 +2868,12 @@
done
IFS="$save_ifs"
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+ exit 0
+ fi
+
# Create links to the real library.
for linkname in $linknames; do
if test "$realname" != "$linkname"; then
@@ -2178,12 +2890,7 @@
fi
;;
- *.lo | *.o | *.obj)
- if test -n "$link_against_libtool_libs"; then
- $echo "$modename: error: cannot link libtool libraries into objects" 1>&2
- exit 1
- fi
-
+ obj)
if test -n "$deplibs"; then
$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
fi
@@ -2208,9 +2915,9 @@
$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
fi
- case "$output" in
+ case $output in
*.lo)
- if test -n "$objs"; then
+ if test -n "$objs$old_deplibs"; then
$echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
exit 1
fi
@@ -2234,7 +2941,7 @@
gentop=
# reload_cmds runs $LD directly, so let us get rid of
# -Wl from whole_archive_flag_spec
- wl=
+ wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
@@ -2253,7 +2960,7 @@
for xlib in $convenience; do
# Extract the objects.
- case "$xlib" in
+ case $xlib in
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
*) xabs=`pwd`"/$xlib" ;;
esac
@@ -2277,7 +2984,7 @@
fi
# Create the old-style object.
- reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
eval cmds=\"$reload_cmds\"
@@ -2312,7 +3019,7 @@
exit 0
fi
- if test -n "$pic_flag"; then
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
output="$libobj"
@@ -2348,8 +3055,10 @@
exit 0
;;
- # Anything else should be a program.
- *)
+ prog)
+ case $host in
+ *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
+ esac
if test -n "$vinfo"; then
$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
fi
@@ -2359,20 +3068,27 @@
fi
if test "$preload" = yes; then
- if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
+ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
test "$dlopen_self_static" = unknown; then
$echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
- fi
+ fi
fi
-
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ ;;
+ esac
+
+ compile_command="$compile_command $compile_deplibs"
+ finalize_command="$finalize_command $finalize_deplibs"
+
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
for libdir in $rpath $xrpath; do
# This is the magic to use -rpath.
- case "$compile_rpath " in
- *" $libdir "*) ;;
- *) compile_rpath="$compile_rpath $libdir" ;;
- esac
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir" ;;
@@ -2390,7 +3106,7 @@
hardcode_libdirs="$libdir"
else
# Just accumulate the unique libdirs.
- case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
@@ -2408,6 +3124,14 @@
*) perm_rpath="$perm_rpath $libdir" ;;
esac
fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$libdir";;
+ esac
+ ;;
+ esac
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
@@ -2426,7 +3150,7 @@
hardcode_libdirs="$libdir"
else
# Just accumulate the unique libdirs.
- case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
@@ -2453,23 +3177,6 @@
fi
finalize_rpath="$rpath"
- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$output_objdir" = "X$output"; then
- output_objdir="$objdir"
- else
- output_objdir="$output_objdir/$objdir"
- fi
-
- # Create the binary in the object directory, then wrap it.
- if test ! -d $output_objdir; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- status=$?
- if test $status -ne 0 && test ! -d $output_objdir; then
- exit $status
- fi
- fi
-
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
@@ -2486,7 +3193,7 @@
fi
if test -n "$dlsyms"; then
- case "$dlsyms" in
+ case $dlsyms in
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
@@ -2518,7 +3225,7 @@
test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
- progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
for arg in $progfiles; do
$show "extracting global C symbols from \`$arg'"
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
@@ -2528,7 +3235,7 @@
$run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
$run eval '$mv "$nlist"T "$nlist"'
fi
-
+
if test -n "$export_symbols_regex"; then
$run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
$run eval '$mv "$nlist"T "$nlist"'
@@ -2617,13 +3324,13 @@
fi
pic_flag_for_symtable=
- case "$host" in
+ case $host in
# compiling the symbol table file with pic_flag works around
# a FreeBSD bug that causes programs to crash when -lm is
# linked before any other PIC object. But we must not use
# pic_flag when linking with -static. The problem exists in
# FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
case "$compile_command " in
*" -static "*) ;;
*) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
@@ -2662,7 +3369,7 @@
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
fi
- if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+ if test $need_relink = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
@@ -2671,7 +3378,7 @@
$show "$link_command"
$run eval "$link_command"
status=$?
-
+
# Delete the generated files.
if test -n "$dlsyms"; then
$show "$rm $output_objdir/${outputname}S.${objext}"
@@ -2685,7 +3392,7 @@
# We should set the shlibpath_var
rpath=
for dir in $temp_rpath; do
- case "$dir" in
+ case $dir in
[\\/]* | [A-Za-z]:[\\/]*)
# Absolute path.
rpath="$rpath$dir:"
@@ -2727,11 +3434,24 @@
fi
fi
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $run $rm $output
+ # Link the executable and exit
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+ exit 0
+ fi
+
if test "$hardcode_action" = relink; then
# Fast installation is not supported
link_command="$compile_var$compile_command$compile_rpath"
relink_command="$finalize_var$finalize_command$finalize_rpath"
-
+
$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
$echo "$modename: \`$output' will be relinked during installation" 1>&2
else
@@ -2751,7 +3471,7 @@
# Replace the output file specification.
link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
+
# Delete the old output files.
$run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
@@ -2763,12 +3483,24 @@
# Quote the relink command for shipping.
if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ fi
+ done
+ relink_command="cd `pwd`; $relink_command"
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
fi
# Quote $echo for shipping.
if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
- case "$0" in
+ case $0 in
[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
esac
@@ -2784,6 +3516,11 @@
case $output in
*.exe) output=`echo $output|sed 's,.exe$,,'` ;;
esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*) exeext=.exe ;;
+ *) exeext= ;;
+ esac
$rm $output
trap "$rm $output; exit 1" 1 2 15
@@ -2813,7 +3550,7 @@
# This environment variable determines our operation mode.
if test \"\$libtool_install_magic\" = \"$magic\"; then
# install mode needs the following variable:
- link_against_libtool_libs='$link_against_libtool_libs'
+ notinst_deplibs='$notinst_deplibs'
else
# When we are sourced in execute mode, \$file and \$echo are already set.
if test \"\$libtool_execute_magic\" != \"$magic\"; then
@@ -2846,7 +3583,7 @@
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
case \"\$destdir\" in
- [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
*) thisdir=\"\$thisdir/\$destdir\" ;;
esac
fi
@@ -2862,9 +3599,9 @@
if test "$fast_install" = yes; then
echo >> $output "\
- program=lt-'$outputname'
+ program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
-
+
if test ! -f \"\$progdir/\$program\" || \\
{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
@@ -2881,7 +3618,7 @@
# relink executable if necessary
if test -n \"\$relink_command\"; then
- if (cd \"\$thisdir\" && eval \$relink_command); then :
+ if (eval \$relink_command); then :
else
$rm \"\$progdir/\$file\"
exit 1
@@ -2931,9 +3668,9 @@
# Run the actual program with our arguments.
"
case $host in
- # win32 systems need to use the prog path for dll
- # lookup to work
- *-*-cygwin*)
+ # win32 systems need to use the prog path for dll
+ # lookup to work
+ *-*-cygwin* | *-*-pw32*)
$echo >> $output "\
exec \$progdir/\$program \${1+\"\$@\"}
"
@@ -2987,7 +3724,7 @@
oldobjs="$libobjs_save"
build_libtool_libs=no
else
- oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+ oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
fi
addlibs="$old_convenience"
fi
@@ -3003,11 +3740,11 @@
exit $status
fi
generated="$generated $gentop"
-
+
# Add in members from convenience archives.
for xlib in $addlibs; do
# Extract the objects.
- case "$xlib" in
+ case $xlib in
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
*) xabs=`pwd`"/$xlib" ;;
esac
@@ -3068,19 +3805,26 @@
fi
# Now create the libtool archive.
- case "$output" in
+ case $output in
*.la)
old_library=
test "$build_old_libs" = yes && old_library="$libname.$libext"
$show "creating $output"
- if test -n "$xrpath"; then
- temp_xrpath=
- for libdir in $xrpath; do
- temp_xrpath="$temp_xrpath -R$libdir"
- done
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
# Only create the output if not a dry run.
if test -z "$run"; then
@@ -3090,8 +3834,52 @@
break
fi
output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ newdependency_libs="$newdependency_libs $libdir/$name"
+ ;;
+ *) newdependency_libs="$newdependency_libs $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+ for lib in $dlfiles; do
+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ newdlfiles="$newdlfiles $libdir/$name"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ newdlprefiles="$newdlprefiles $libdir/$name"
+ done
+ dlprefiles="$newdlprefiles"
fi
$rm $output
+ # place dlname in correct position for cygwin
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ esac
$echo > $output "\
# $outputname - a libtool library file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
@@ -3100,7 +3888,7 @@
# It is necessary for linking the library.
# The name that we can dlopen(3).
-dlname='$dlname'
+dlname='$tdlname'
# Names of this library.
library_names='$library_names'
@@ -3119,16 +3907,23 @@
# Is this an already installed library?
installed=$installed
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
# Directory that this library needs to be installed in:
-libdir='$install_libdir'\
-"
+libdir='$install_libdir'"
+ if test "$installed" = no && test $need_relink = yes; then
+ $echo >> $output "\
+relink_command=\"$relink_command\""
+ fi
done
fi
# Do a symbolic link so that the libtool archive can be found in
# LD_LIBRARY_PATH before the program is installed.
$show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
- $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
;;
esac
exit 0
@@ -3140,10 +3935,12 @@
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || test "$nonopt" = ./shtool;then
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
+ case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
arg="\"$arg\""
;;
@@ -3159,7 +3956,7 @@
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
+ case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
arg="\"$arg\""
;;
@@ -3182,7 +3979,7 @@
continue
fi
- case "$arg" in
+ case $arg in
-d) isdir=yes ;;
-f) prev="-f" ;;
-g) prev="-g" ;;
@@ -3207,7 +4004,7 @@
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
+ case $arg in
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
arg="\"$arg\""
;;
@@ -3258,11 +4055,11 @@
exit 1
fi
fi
- case "$destdir" in
+ case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
for file in $files; do
- case "$file" in
+ case $file in
*.lo) ;;
*)
$echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
@@ -3284,8 +4081,8 @@
for file in $files; do
# Do each installation.
- case "$file" in
- *.a | *.lib)
+ case $file in
+ *.$libext)
# Do the static libraries later.
staticlibs="$staticlibs $file"
;;
@@ -3301,8 +4098,9 @@
library_names=
old_library=
+ relink_command=
# If there is no directory component, then add one.
- case "$file" in
+ case $file in
*/* | *\\*) . $file ;;
*) . ./$file ;;
esac
@@ -3321,10 +4119,20 @@
esac
fi
- dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
test "X$dir" = "X$file/" && dir=
dir="$dir$objdir"
+ if test -n "$relink_command"; then
+ $echo "$modename: warning: relinking \`$file'" 1>&2
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+ continue
+ fi
+ fi
+
# See the names of the shared library.
set dummy $library_names
if test -n "$2"; then
@@ -3332,9 +4140,16 @@
shift
shift
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
# Install the shared library and build the symlinks.
- $show "$install_prog $dir/$realname $destdir/$realname"
- $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+ $show "$install_prog $dir/$srcname $destdir/$realname"
+ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+ if test -n "$stripme" && test -n "$striplib"; then
+ $show "$striplib $destdir/$realname"
+ $run eval "$striplib $destdir/$realname" || exit $?
+ fi
if test $# -gt 0; then
# Delete the old symlinks, and create new ones.
@@ -3381,11 +4196,11 @@
fi
# Deduce the name of the destination old-style object file.
- case "$destfile" in
+ case $destfile in
*.lo)
staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
;;
- *.o | *.obj)
+ *.$objext)
staticdest="$destfile"
destfile=
;;
@@ -3424,39 +4239,46 @@
# Do a test to see if this is really a libtool program.
if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
- link_against_libtool_libs=
+ notinst_deplibs=
relink_command=
# If there is no directory component, then add one.
- case "$file" in
+ case $file in
*/* | *\\*) . $file ;;
*) . ./$file ;;
esac
# Check the variables that should have been set.
- if test -z "$link_against_libtool_libs"; then
+ if test -z "$notinst_deplibs"; then
$echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
exit 1
fi
finalize=yes
- for lib in $link_against_libtool_libs; do
+ for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
# If there is no directory component, then add one.
- case "$lib" in
+ case $lib in
*/* | *\\*) . $lib ;;
*) . ./$lib ;;
esac
fi
- libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
if test -n "$libdir" && test ! -f "$libfile"; then
$echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
finalize=no
fi
done
+ relink_command=
+ # If there is no directory component, then add one.
+ case $file in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
outputname=
if test "$fast_install" = no && test -n "$relink_command"; then
if test "$finalize" = yes && test -z "$run"; then
@@ -3468,6 +4290,7 @@
$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
continue
fi
+ file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
@@ -3489,6 +4312,23 @@
fi
fi
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyways
+ case $install_prog,$host in
+ /usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ destfile=`echo $destfile | sed -e 's,.exe$,,'`
+ ;;
+ esac
+ ;;
+ esac
$show "$install_prog$stripme $file $destfile"
$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
test -n "$outputname" && ${rm}r "$tmpdir"
@@ -3505,6 +4345,11 @@
$show "$install_prog $file $oldlib"
$run eval "$install_prog \$file \$oldlib" || exit $?
+ if test -n "$stripme" && test -n "$striplib"; then
+ $show "$old_striplib $oldlib"
+ $run eval "$old_striplib $oldlib" || exit $?
+ fi
+
# Do each command in the postinstall commands.
eval cmds=\"$old_postinstall_cmds\"
IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
@@ -3523,7 +4368,7 @@
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
test -n "$run" && current_libdirs=" -n$current_libdirs"
- exit 0 #$current_libdirs
+ exec $SHELL $0 --finish$current_libdirs
exit 1
fi
@@ -3565,7 +4410,7 @@
fi
# Exit here if they wanted silent mode.
- test "$show" = : && exit 0
+ test "$show" = ":" && exit 0
echo "----------------------------------------------------------------------"
echo "Libraries have been installed in:"
@@ -3575,7 +4420,7 @@
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
@@ -3625,7 +4470,7 @@
fi
dir=
- case "$file" in
+ case $file in
*.la)
# Check to see that this really is a libtool archive.
if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
@@ -3640,7 +4485,7 @@
library_names=
# If there is no directory component, then add one.
- case "$file" in
+ case $file in
*/* | *\\*) . $file ;;
*) . ./$file ;;
esac
@@ -3695,13 +4540,13 @@
args=
for file
do
- case "$file" in
+ case $file in
-*) ;;
*)
# Do a test to see if this is really a libtool program.
if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
# If there is no directory component, then add one.
- case "$file" in
+ case $file in
*/* | *\\*) . $file ;;
*) . ./$file ;;
esac
@@ -3718,8 +4563,8 @@
if test -z "$run"; then
if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
fi
# Restore saved enviroment variables
@@ -3738,23 +4583,30 @@
else
# Display what would be done.
if test -n "$shlibpath_var"; then
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
+ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+ $echo "export $shlibpath_var"
fi
$echo "$cmd$args"
exit 0
fi
;;
- # libtool uninstall mode
- uninstall)
- modename="$modename: uninstall"
+ # libtool clean and uninstall mode
+ clean | uninstall)
+ modename="$modename: $mode"
rm="$nonopt"
files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
for arg
do
- case "$arg" in
+ case $arg in
+ -f) rm="$rm $arg"; rmforce=yes ;;
-*) rm="$rm $arg" ;;
*) files="$files $arg" ;;
esac
@@ -3766,14 +4618,42 @@
exit 1
fi
+ rmdirs=
+
for file in $files; do
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
+ if test "X$dir" = "X$file"; then
+ dir=.
+ objdir="$objdir"
+ else
+ objdir="$dir/$objdir"
+ fi
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ test $mode = uninstall && objdir="$dir"
+
+ # Remember objdir for removal later, being careful to avoid duplicates
+ if test $mode = clean; then
+ case " $rmdirs " in
+ *" $objdir "*) ;;
+ *) rmdirs="$rmdirs $objdir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if (test -L "$file") >/dev/null 2>&1 \
+ || (test -h "$file") >/dev/null 2>&1 \
+ || test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
rmfiles="$file"
- case "$name" in
+ case $name in
*.la)
# Possibly a libtool archive, so verify it.
if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
@@ -3781,38 +4661,43 @@
# Delete the libtool libraries and symlinks.
for n in $library_names; do
- rmfiles="$rmfiles $dir/$n"
+ rmfiles="$rmfiles $objdir/$n"
done
- test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
-
- $show "$rm $rmfiles"
- $run $rm $rmfiles
+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+ test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- eval cmds=\"$postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
+ if test $mode = uninstall; then
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ eval cmds=\"$postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ if test $? != 0 && test "$rmforce" != yes; then
+ exit_status=1
+ fi
+ done
IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- fi
+ fi
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- eval cmds=\"$old_postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ eval cmds=\"$old_postuninstall_cmds\"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd"
+ if test $? != 0 && test "$rmforce" != yes; then
+ exit_status=1
+ fi
+ done
IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
+ fi
+ # FIXME: should reinstall the best remaining shared library.
fi
-
- # FIXME: should reinstall the best remaining shared library.
fi
;;
@@ -3821,17 +4706,35 @@
oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
rmfiles="$rmfiles $dir/$oldobj"
fi
- $show "$rm $rmfiles"
- $run $rm $rmfiles
;;
*)
- $show "$rm $rmfiles"
- $run $rm $rmfiles
+ # Do a test to see if this is a libtool program.
+ if test $mode = clean &&
+ (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ relink_command=
+ . $dir/$file
+
+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ rmfiles="$rmfiles $objdir/lt-$name"
+ fi
+ fi
;;
esac
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles || exit_status=1
done
- exit 0
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ $show "rmdir $dir"
+ $run rmdir $dir >/dev/null 2>&1
+ fi
+ done
+
+ exit $exit_status
;;
"")
@@ -3847,7 +4750,7 @@
fi # test -z "$show_help"
# We need to display help for each of the modes.
-case "$mode" in
+case $mode in
"") $echo \
"Usage: $modename [OPTION]... [MODE-ARG]...
@@ -3866,6 +4769,7 @@
MODE must be one of the following:
+ clean remove files from the build directory
compile compile a source file into a libtool object
execute automatically set library path, then run a program
finish complete the installation of libtool libraries
@@ -3878,6 +4782,20 @@
exit 0
;;
+clean)
+ $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
compile)
$echo \
"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
@@ -3887,6 +4805,8 @@
This mode accepts the following additional options:
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -prefer-pic try to building PIC objects only
+ -prefer-non-pic try to building non-PIC objects only
-static always build a \`.o' file suitable for static linking
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
@@ -3966,6 +4886,8 @@
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
-release RELEASE specify package release information
|
